FPGA COMPONENTS & BOARD MANUFACTURING For research, development & industrial systems
Request a quote

AMD / Xilinx / Chips & IP

Spartan

I/O-focused, cost-conscious FPGA lineage for control, bridging, sensors, and distributed embedded systems.

Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.

Discuss sourcing ↗Manufacturer reference ↗
Spartan — technical product-family map
Technical schematicFPGA.io technical schematic for Spartan. Product branches are shown as a navigation overview. This is an abstract diagram, not a product photograph, package drawing or pinout. Technical reference ↗
Product scopeChips & IP
Device references in this category19
Documented ordering codes44
Information checked2026-09-28

FROM FAMILY TO DEVICE

Chip models in Spartan

Reviewed ordering-number examples

These complete codes belong to this category or its documented subseries. Open a part to review package and grade-specific data or add it to comparison.

Full part numberFamily / packageNative logic resourceBlock RAMUser I/OSelection
XC7S15-1FTGB196CAMD / Xilinx · Commercial (C)Spartan-7FTGB19612800 logic cells360 Kb100+ Compare

View all reviewed Spartan-7 ordering numbers →

Documented device references

Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.

Clear

BASE DEVICE

XC2S200

Spartan-II base device for legacy design maintenance. Package, speed and temperature suffixes are required to identify an orderable part.

Logic cells
5292 cells
Configurable logic blocks
1176 CLBs
Block RAM
56 Kbit (1024 bits)
1 ordering codeXC2S200-5FGG456C →
Specifications & documents →

BASE DEVICE

XC2S600E

Spartan-IIE base device for legacy design maintenance. Package, speed and temperature suffixes are required to identify an orderable part.

Logic cells
15552 cells
Configurable logic blocks
3456 CLBs
Block RAM
288 Kbit (1024 bits)
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →

BASE DEVICE

XC3S200

Spartan-3 base device for legacy design maintenance. Package, speed and temperature suffixes are required to identify an orderable part.

Equivalent logic cells
4320 cells
Configurable logic blocks
480 CLBs
Block RAM
216 Kbit (1024 bits)
1 ordering codeXC3S200-4FTG256C →
Specifications & documents →

BASE DEVICE

XC3S250E

Spartan-3E base device for legacy design maintenance. Package, speed and temperature suffixes are required to identify an orderable part.

Equivalent logic cells
5508 cells
Configurable logic blocks
612 CLBs
Block RAM
216 Kbit (1024 bits)
1 ordering codeXC3S250E-4TQG144I →
Specifications & documents →

BASE DEVICE

XC3S500E

Spartan-3E base device for legacy design maintenance. Package, speed and temperature suffixes are required to identify an orderable part.

Equivalent logic cells
10476 cells
Configurable logic blocks
1164 CLBs
Block RAM
360 Kbit (1024 bits)
1 ordering codeXC3S500E-4PQ208C →
Specifications & documents →

BASE DEVICE

XC3SD1800A

Spartan-3A DSP base device for legacy design maintenance, with DSP48A arithmetic slices. Package, speed and temperature suffixes are required to identify an orderable part.

Equivalent logic cells
37440 cells
Configurable logic blocks
4160 CLBs
Block RAM
1512 Kbit (1024 bits)
1 ordering codeXC3SD1800A-4CSG484I →
Specifications & documents →

19 device references

Browse the full AMD / Xilinx product map →

WITHIN THIS PRODUCT LINE

Series & subcategories

FPGA families

Spartan-7

A 7 Series entry point for parallel I/O, sensor aggregation, control logic, and compact embedded designs.

0 device refs · 1 ordering codesExplore Spartan-7 →
FPGA families

Spartan 6

Legacy-era LX and LXT devices retained for established designs. AMD states lifecycle support through at least 2030; development uses ISE.

2 device refs · 4 ordering codesExplore Spartan 6 →
FPGA families

Spartan-II

Spartan-II is a manufacturer-named product family or series. Check the exact device, documentation, tool support and lifecycle before design-in.

2 device refs · 4 ordering codesExplore Spartan-II →
FPGA families

Spartan-IIE

Spartan-IIE is a manufacturer-named product family or series. Check the exact device, documentation, tool support and lifecycle before design-in.

2 device refs · 2 ordering codesExplore Spartan-IIE →
FPGA families

Spartan-XL

Spartan-XL is a manufacturer-named product family or series. Check the exact device, documentation, tool support and lifecycle before design-in.

0 device refs · 0 ordering codesExplore Spartan-XL →

SELECTION CONTEXT

Working with Spartan

Define the required function

I/O-focused, cost-conscious FPGA lineage for control, bridging, sensors, and distributed embedded systems.

Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.

Check the integration boundary

Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.

Open the manufacturer reference ↗

ENGINEERING DECISIONS

What to confirm before selection

Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.

  1. Start with I/O count, bank voltage, and required interface standards.
  2. Choose the architecture generation before planning migration.

Move from family to full ordering number

Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.

Browse reviewed FPGA device data →

Preparing a complete board?

Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.

PCBA project preparation →

EVIDENCE & DEVELOPMENT

Documents for this product line

Start with the device table, then check electrical limits, ordering information and the applicable tool release.

Spartan — manufacturer referenceManufacturer product documentationPrimary source ↗AMD Spartan UltraScale+ FPGAsProduct TableWeb ↗Spartan-II FPGA Family Data Sheet, v2.9 (2021-03-12)Table 1, p. 2; Table 2, p. 4; Ordering Information, p. 5PDF ↗Legacy FPGA and CPLD Product Discontinuation Notice, v1.1 (2024-01-29)Scope, p. 1; Table 3, p. 2; Table 5, pp. 3-5; final-order and final-delivery dates, p. 5PDF ↗Spartan-IIE FPGA Family Data Sheet, v3.0 (2013-08-09)Table 1, p. 3; Table 2, p. 5; Revision History, p. 7PDF ↗Spartan-IIE and other legacy products: Product Discontinuation Notice, v1.0.2 (2013-04-24)Scope and final-order dates, p. 1; Table 2, pp. 2-3PDF ↗Spartan-3 FPGA Family Data Sheet, v3.1 (2013-06-27)Table 1 and notes, p. 2; package and pinout tablesPDF ↗Spartan-3A FPGA Family Data Sheet, v2.1 (2018-12-18)Table 1 and notes, p. 3; Architectural Overview and configurationPDF ↗Spartan-3AN FPGA Family Data Sheet, v4.3 (2019-01-09)Table 2 and notes, p. 2; Configuration and In-System Flash Memory, Table 3, p. 4PDF ↗Spartan-3E FPGA Family Data Sheet, v4.2 (2018-12-14)Table 1 and notes, p. 2; package and footprint migration tablesPDF ↗
More AMD / Xilinx development resources

AMD FPGA portfolio ↗

Compare FPGA architecture generations and find automotive, defense, and space-grade branches.

These broader manufacturer resources do not establish support or compatibility for every device on this page.

PRACTICAL QUESTIONS

Spartan selection questions

How do I select a model within Spartan?

Start with the documented product scope: I/O-focused, cost-conscious FPGA lineage for control, bridging, sensors, and distributed embedded systems. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.

Is a base-device name enough to place an order?

A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.

Can the listed devices use the same PCB or development tools?

A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.

What should I include for sourcing or PCBA review?

Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.

PREPARE A USEFUL INQUIRY

Build your selection brief.

Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.

Open quotation form →

Sources & portfolio context

AMD / Xilinx Spartan reference ↗

Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.

← Complete AMD / Xilinx product map

Related entries in this category

Artix 2 device refs · 49 ordering codes →Kintex 6 device refs · 205 ordering codes →Virtex 10 device refs · 17 ordering codes →CoolRunner and XC9500XL CPLDs 2 device refs · 11 ordering codes →