BASE DEVICE
A2F200
SmartFusion SoC FPGA base device with Cortex-M3 processor and programmable analog.
- Equivalent logic elements
- 2 K LE
- 4608-bit RAM blocks
- 8 blocks
- MSS flash
- 256 Kbytes
1 ordering codeA2F200M3F-PQG208I →
Specifications & documents →Microchip Technology / Chips & IP
Earlier-generation FPGA families
Maintain architectural distinctions when researching existing Actel and Microsemi designs.
Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.
Product scopeChips & IP
Device references in this category13
Documented ordering codes43
Information checked2026-09-28
FROM FAMILY TO DEVICE
Chip models in Earlier-generation FPGA families
Documented device references
Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.
BASE DEVICE
A2F500
SmartFusion SoC FPGA base device with Cortex-M3 processor and programmable analog.
- Equivalent logic elements
- 6 K LE
- 4608-bit RAM blocks
- 24 blocks
- MSS flash
- 512 Kbytes
BASE DEVICE
A3P250
ProASIC 3 flash FPGA base device in the indicated subseries.
- Equivalent logic elements
- 3000
- RAM
- 36 Kb (1024 bits)
- FlashROM
- 1024 bit
BASE DEVICE
A3P600L
ProASIC 3 flash FPGA base device in the indicated subseries.
- Equivalent logic elements
- 7000
- RAM
- 108 Kb (1024 bits)
- FlashROM
- 1024 bit
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →BASE DEVICE
A3PE600
ProASIC 3 flash FPGA base device in the indicated subseries.
- Equivalent logic elements
- 7000
- RAM
- 108 Kb (1024 bits)
- FlashROM
- 1024 bit
BASE DEVICE
A3PE3000
ProASIC 3 flash FPGA base device in the indicated subseries.
- Equivalent logic elements
- 35000
- RAM
- 504 Kb (1024 bits)
- FlashROM
- 1024 bit
1 ordering codeA3PE3000-FG484 →
Specifications & documents →BASE DEVICE
A3PE3000L
ProASIC 3 flash FPGA base device in the indicated subseries.
- Equivalent logic elements
- 35000
- RAM
- 504 Kb (1024 bits)
- FlashROM
- 1024 bit
BASE DEVICE
A3PN060
ProASIC 3 flash FPGA base device in the indicated subseries.
- Equivalent logic elements
- 700
- RAM
- 18 Kb (1024 bits)
- FlashROM
- 1024 bit
1 ordering codeA3PN060-VQG100 →
Specifications & documents →BASE DEVICE
A3PN250
ProASIC 3 flash FPGA base device in the indicated subseries.
- Equivalent logic elements
- 3000
- RAM
- 36 Kb (1024 bits)
- FlashROM
- 1024 bit
1 ordering codeA3PN250-VQG100 →
Specifications & documents →BASE DEVICE
AFS250
Fusion mixed-signal FPGA base device.
- Equivalent logic elements
- 3 K LE
- Tiles (D flip-flops)
- 6144 tiles
- PLLs
- 1 PLLs
2 ordering codesAFS250-FG256 →AFS250-QNG180I →
Specifications & documents →BASE DEVICE
AFS1500
Fusion mixed-signal FPGA base device.
- Equivalent logic elements
- 16 K LE
- Tiles (D flip-flops)
- 38400 tiles
- PLLs
- 2 PLLs
BASE DEVICE
AGL125
IGLOO flash-based low-power FPGA base device.
- Equivalent logic elements
- 1.5 K LE
- RAM
- 36 Kb
- FlashROM
- 1024 bits
BASE DEVICE
AGLE3000
IGLOO flash-based low-power FPGA base device.
- Equivalent logic elements
- 35 K LE
- RAM
- 504 Kb
- FlashROM
- 1024 bits
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →13 device references
No model matches this search. Clear the filter or send the exact part number for review.
Browse the full Microchip Technology product map →
WITHIN THIS PRODUCT LINE
Series & subcategories
ProASIC 3 — earlier generation
Nonvolatile flash FPGA lineage for low-density programmable logic, with several power and I/O variants.
7 device refs · 23 ordering codesProASIC 3e 2 device refs · 5 ordering codesProASIC 3 nano 2 device refs · 2 ordering codesProASIC 3L 2 device refs · 3 ordering codes
Explore ProASIC 3 — earlier generation →IGLOO — earlier generation
Low-density flash FPGA lineage including IGLOO/e, nano and PLUS branches, with low-power retention modes.
2 device refs · 5 ordering codesExplore IGLOO — earlier generation →SmartFusion — earlier generation
Combines Cortex-M3 processing, programmable logic and programmable analog circuitry.
2 device refs · 7 ordering codesExplore SmartFusion — earlier generation →Fusion — earlier generation
Mixed-signal flash FPGA combining analog resources, flash storage and programmable logic.
2 device refs · 8 ordering codesExplore Fusion — earlier generation →ProASIC Plus — earlier generation
ProASIC Plus — earlier generation is a manufacturer-named product family or series. Check the exact device, documentation, tool support and lifecycle before design-in.
0 device refs · 0 ordering codesExplore ProASIC Plus — earlier generation →SELECTION CONTEXT
Working with Earlier-generation FPGA families
Define the required function
Maintain architectural distinctions when researching existing Actel and Microsemi designs.
Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.
Check the integration boundary
Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.
Open the manufacturer reference ↗ENGINEERING DECISIONS
What to confirm before selection
Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.
- Use the vendor-native logic, memory and DSP definitions; unlike resource units are not directly equivalent.
- Confirm package pinout, I/O bank voltages, configuration method and the supported tool release before layout.
- Review power sequencing, decoupling, BGA escape routing and programming access with the complete ordering number.
- Check the core, flash/RAM, peripherals, pin multiplexing and safety/security requirements together.
- Confirm debugger, IDE/compiler version, bootloader and in-circuit programming access for production.
Move from family to full ordering number
Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.
Send the exact project requirement →Preparing a complete board?
Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.
PCBA project preparation →EVIDENCE & DEVELOPMENT
Documents for this product line
Start with the device table, then check electrical limits, ordering information and the applicable tool release.
Microchip ProASIC 3 FPGAsProASIC 3 / 3e / nano / 3L Series Products tablesWeb ↗Microchip SmartFusion FPGAsProduct Table, FPGA Fabric and MSSWeb ↗Microchip Fusion FPGAsProduct Table, GeneralWeb ↗Microchip IGLOO FPGAsIGLOO devices Product TableWeb ↗
More Microchip Technology development resources
FPGA portfolio ↗
Official FPGA, SoC and radiation-tolerant family overview.
FPGA documentation ↗
Device data sheets, application notes and design documentation.
FPGA boards and kits ↗
Vendor development boards, expansion cards and programming hardware.
FPGA licensing ↗
Device and feature support by Libero licence type.
These broader manufacturer resources do not establish support or compatibility for every device on this page.
PRACTICAL QUESTIONS
Earlier-generation FPGA families selection questions
How do I select a model within Earlier-generation FPGA families?
Start with the documented product scope: Maintain architectural distinctions when researching existing Actel and Microsemi designs. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.
Is a base-device name enough to place an order?
A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.
Can the listed devices use the same PCB or development tools?
A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.
What should I include for sourcing or PCBA review?
Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.
PREPARE A USEFUL INQUIRY
Build your selection brief.
Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.
Open quotation form →Sources & portfolio context
Microchip Technology Earlier-generation FPGA families reference ↗
Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.
← Complete Microchip Technology product mapRelated entries in this category
FPGAs and SoC FPGAs 12 device refs · 38 ordering codes →Radiation-tolerant FPGAs 8 device refs · 136 ordering codes →Development kits 5 portfolio entries →Design and programming tools 5 portfolio entries →Microcontrollers and DSCs 0 device refs · 0 ordering codes →Microprocessors 0 device refs · 0 ordering codes →Analog, converters, timing and power 0 device refs · 0 ordering codes →Memory, interfaces and connectivity 0 device refs · 0 ordering codes →