FPGA COMPONENTS & BOARD MANUFACTURING For research, development & industrial systems

Microchip Technology / Chips & IP

ProASIC 3 — earlier generation

Nonvolatile flash FPGA lineage for low-density programmable logic, with several power and I/O variants.

Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.

ProASIC 3 — earlier generation — technical product-family map
Technical schematicFPGA.io technical schematic for ProASIC 3 — earlier generation. Product branches are shown as a navigation overview. This is an abstract diagram, not a product photograph, package drawing or pinout. Technical reference ↗
Product scopeChips & IP
Device references in this category7
Documented ordering codes23
Information checked2026-09-28

FROM FAMILY TO DEVICE

Chip models in ProASIC 3 — earlier generation

Documented device references

Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.

BASE DEVICE

A3P600L

ProASIC 3 flash FPGA base device in the indicated subseries.

Equivalent logic elements
7000
RAM
108 Kb (1024 bits)
FlashROM
1024 bit
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →

7 device references

WITHIN THIS PRODUCT LINE

Series & subcategories

SELECTION CONTEXT

Working with ProASIC 3 — earlier generation

Define the required function

Nonvolatile flash FPGA lineage for low-density programmable logic, with several power and I/O variants.

Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.

Check the integration boundary

Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.

Open the manufacturer reference ↗

ENGINEERING DECISIONS

What to confirm before selection

Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.

  1. Confirm supported legacy design software.
  2. Check the exact part's temperature grade and package.

Move from family to full ordering number

Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.

Send the exact project requirement →

Preparing a complete board?

Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.

PCBA project preparation →

EVIDENCE & DEVELOPMENT

Documents for this product line

Start with the device table, then check electrical limits, ordering information and the applicable tool release.

More Microchip Technology development resources

These broader manufacturer resources do not establish support or compatibility for every device on this page.

PRACTICAL QUESTIONS

ProASIC 3 — earlier generation selection questions

How do I select a model within ProASIC 3 — earlier generation?

Start with the documented product scope: Nonvolatile flash FPGA lineage for low-density programmable logic, with several power and I/O variants. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.

Is a base-device name enough to place an order?

A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.

Can the listed devices use the same PCB or development tools?

A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.

What should I include for sourcing or PCBA review?

Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.

PREPARE A USEFUL INQUIRY

Build your selection brief.

Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.

Open quotation form →

Sources & portfolio context

Microchip Technology ProASIC 3 — earlier generation reference ↗

Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.

← Complete Microchip Technology product map

Related entries in this category