FPGA COMPONENTS & BOARD MANUFACTURING For research, development & industrial systems

Microchip Technology / Boards & kits

Development kits

Representative Microchip platforms for logic, RISC-V software and interface evaluation.

Evaluation hardware: identify the kit code and board revision, then verify fitted devices, connector voltages, power and supplied accessories.

Development kits — technical product-family map
Technical schematicFPGA.io technical schematic for Development kits. Product branches are shown as a navigation overview. This is an abstract diagram, not a product photograph, package drawing or pinout. Technical reference ↗

EVALUATION & INTEGRATION

Board identity & bring-up

Identify your hardware

Record kit ordering code, PCB revision and fitted device. Obtain the matching user guide, schematic and bill of supplied accessories.

Check before power-on

Confirm supply polarity/rating, jumper settings, connector voltages and boot mode from the board guide. Disconnect unverified peripherals.

Establish a reproducible baseline

Run the documented example with its specified tool release. Save the configuration, logs and observed result before changing interfaces or firmware.

Open the applicable documents ↓ · Prepare an engineering question →

This is a review workflow, not a claim that FPGA.io has tested this release or board. Record your exact revision and acceptance result.

WITHIN THIS PRODUCT LINE

Series & subcategories

ENGINEERING DECISIONS

What to confirm before selection

Record the exact revision and resolve these requirements against its documentation.

  1. Use the vendor-native logic, memory and DSP definitions; unlike resource units are not directly equivalent.
  2. Confirm package pinout, I/O bank voltages, configuration method and the supported tool release before layout.
  3. Review power sequencing, decoupling, BGA escape routing and programming access with the complete ordering number.
  4. Check the core, flash/RAM, peripherals, pin multiplexing and safety/security requirements together.
  5. Confirm debugger, IDE/compiler version, bootloader and in-circuit programming access for production.

EVIDENCE & DEVELOPMENT

Documents for this product line

Start with the exact product or release documentation, then check the supported devices, interfaces, licences and revision requirements.

More Microchip Technology development resources

These broader manufacturer resources do not establish support or compatibility for every device on this page.

PRACTICAL QUESTIONS

Development kits selection questions

Which product or release should I specify?

Use the exact product name and revision, together with the target device and intended workflow. Representative Microchip platforms for logic, RISC-V software and interface evaluation.

How do I check device support?

Use the manufacturer support matrix, release notes or board documentation for the exact revision. Record the exact target device and version; a shared manufacturer alone does not prove compatibility.

What should be checked before integration?

Confirm the board or module revision, fitted device, carrier interface, supply, cooling, connectors, accessories and reference software.

What should I include in a project request?

Describe the application, exact product or revision, target hardware, quantities and delivery requirements. State which components, board manufacturing, programming and test work you need reviewed.

PREPARE A USEFUL INQUIRY

Build your selection brief.

Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.

Open quotation form →

Sources & portfolio context

Microchip Technology Development kits reference ↗

Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.

← Complete Microchip Technology product map

Related entries in this category