FPGA DEVICES · ENGINEERING · SOURCING Source-linked information. Clear project requirements.

AMD / Xilinx / Zynq-7000 SoC

XC7Z035-1FFG676C

FFG676 · Commercial (C) · Speed grade -1

Lifecycle & ordering review: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation. Evidence and conditions ↓

Core fields reviewed 2026-11-13
Source links and conditions accompany each parameter.

XC7Z035-1FFG676C: 172,000 assumed LUTs / 171,900 available; 100 over the source count; rework is required. Original technical schematic, not a pinout or footprint.
Technical schematic172,000 assumed LUTs / 171,900 available. 100 over the source count; rework is required. Original educational schematic; calculations are hypothetical where shown. Not to scale, not a pinout or PCB footprint. Technical references ↗

FPGA.io Part Number FIO-90EA38CAA46D1914Internal catalogue reference · manufacturer MPN remains unchanged

Logic cells
275000 logic cells
Block RAM capacity
18000 Kb
DSP slices
900 DSP48E1
User I/O in this package
250 I/O

SOURCING REFERENCES

Price & delivery references

Get Price & Lead Time ↗

No verified supplier stock or price is currently displayed here. Request a quotation for your quantity and required delivery date.

Check this exact MPN at external distributors

Search links do not establish stock, price or an authorized distribution relationship. Check the full code, package and grade at the source.

PRODUCT OVERVIEW

About XC7Z035-1FFG676C

XC7Z035-1FFG676C is a system-on-chip combining an Arm processing system and FPGA programmable logic in the AMD / Xilinx Zynq-7000 SoC family, supplied in the FFG676 package. Its reviewed resources include 275,000 logic cells, 18,000 Kb of block RAM, 250 I/O for this device/package combination. This ordering code specifies speed grade -1 and Commercial (C) temperature grade. The selected device/package has 8 GTX channels; check this package-level limit before planning serial interfaces. The user-I/O figure here refers to PL SelectIO only. The 128 PS I/O in UG865 are a separate functional allocation, not interchangeable general-purpose PL pins. Use the linked manufacturer data sheets for electrical limits, pin assignments and timing. FPGA.io can review the complete part number for chip sourcing or a combined sourcing and PCBA project.

  • Logic cells275,000 logic cells
  • Block RAM capacity18,000 Kb
  • DSP slices900 DSP48E1
  • User I/O in this package250 I/O
  • Package codeFFG676
  • Junction temperature (Tj)0 to +85 °C
Review parameter sources and conditions ↓

Technical specifications

XC7Z035 SoC: PL resources and exact device/package I/O, GTX, body, pitch, physical pins, full literal identity and grade limits. PS I/O are separate. Historical source revisions retained; present availability unknown.

Logic & memory

ParameterValueScope / evidence
Logic cells275000 logic cellsdeviceDS190Z035 ↗p3 Table1 XC7Z035 Logic Cells row
Conditions

Rounded vendor figure 275K, not a LUT count.

6-input LUTs171900 LUT6deviceDS190Z035 ↗p3 Table1 XC7Z035 Look-Up Tables row
Block RAM capacity18000 KbderivedDS190Z035 ↗p3 Table1 XC7Z035 500 × 36 Kb blocks
Conditions

Derived 500 × 36 = 18000 Kb; source headline rounded 17.6 Mb. Not bytes or a guaranteed memory configuration.

36 Kb block RAM blocks500 blocksdeviceDS190Z035 ↗p3 Table1 XC7Z035 Block RAM row
Conditions

Each source block is 36 Kb.

DSP slices900 DSP48E1deviceDS190Z035 ↗p3 Table1 XC7Z035 DSP Slices row; DS191 p58 Table70 DSP48E1 architecture cross-check
Conditions

900 slices; count does not establish application throughput.

Package & interfaces

ParameterValueScope / evidence
User I/O in this package250 I/Odevice-packageUG865Z035 ↗p11 Table1-4 XC7Z035 / FFG676
Conditions

PL SelectIO only: 100 HR + 150 HP. Separate 128 PS I/O are not interchangeable PL pins. Differential counts are alternate uses, not additive.

Serial transceivers in this package8 GTX channelsdevice-packageUG865Z035 ↗p10 Table1-3 XC7Z035 / FFG676
Conditions

8 exposed GTX channels; neither a family maximum nor a protocol qualification.

Package codeFFG676MPNXCN20011Z035 ↗p4 Table6 Replacement Part column; left block, literal XC7Z035-1FFG676C. Original PDF table visually inspected.
Conditions

Historical replacement code, not the affected V package code.

Package ball count676 ballspackagePINSZ035676 ↗Header xc7z035ffg676; 676 distinct physical package-pin rows
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

Package body27 × 27 mmpackageUG865Z035 ↗p88 Figure4-12 (XC7Z035/XC7Z045 FFG676), D and E
Conditions

Package body only, excluding PCB courtyard. For FFG900, cited lid variants share this body size; no lid variant is inferred for a supplied lot.

Ball pitch1 mmpackageUG865Z035 ↗p88 Figure4-12, e
Conditions

Nominal ball pitch. A body drawing is not a fabrication-ready land pattern.

Package terminals / leads (vendor count)676 pinspackagePINSZ035676 ↗Header xc7z035ffg676; 676 distinct physical package-pin rows
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

Operating conditions

ParameterValueScope / evidence
Speed grade-1MPNXCN20011Z035 ↗p4 Table6 exact literal XC7Z035-1FFG676C
Conditions

DS190 p23 Table7 cross-checks permitted grade combinations. Not a single application clock rating.

Junction temperature (Tj)0 to +85 °CgradeDS191Z035 ↗p4 Table2 Tj C row
Conditions

Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.

Temperature gradeCommercial (C)MPNDS190Z035 ↗p23 Table7 XC7Z035 group and Figure4; exact letter in XCN20011 p4
Core voltage conditions0.97 to 1.03 VgradeDS191Z035 ↗p3 Table2 VCCINT for -3/-2/-1
Conditions

PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.

Maximum application clockNot confirmeddesign
Conditions

Design-specific timing not established.

Application powerNot confirmeddesign
Conditions

Workload, implementation and thermal analysis required.

Minimum junction temperature0 °CgradeDS191Z035 ↗p4 Table2 Tj C row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

Maximum junction temperature85 °CgradeDS191Z035 ↗p4 Table2 Tj C row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

Temperature referenceJunction temperature (Tj)gradeDS191Z035 ↗p4 Table2 Tj rows
Conditional temperature operationRecommended operating Tj rangegradeDS191Z035 ↗p4 Table2 Tj C row
Conditions

DS191 Table2 and applicable notes. No extended or over-temperature qualification is asserted.

Minimum core voltage0.97 VgradeDS191Z035 ↗p3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Nominal core voltage1 VgradeDS191Z035 ↗p3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Maximum core voltage1.03 VgradeDS191Z035 ↗p3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Supply & status

ParameterValueScope / evidence
Current lifecycleNot confirmedsupplyXCN20011Z035 ↗p4 Table6 replacement-part columns
Conditions

Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Available stockNot confirmedsupply
Conditions

Current inventory, USD price and lead time are not verified. Request a quotation for the full ordering code.

MANUFACTURER REFERENCES

Official documents & PDF datasheets

Use the electrical data sheet together with the device overview and package/pinout information.

Data sheet / device referenceDS190 — Zynq-7000 SoC Data Sheet: Overviewp3 Table1 XC7Z035 column; p23 Table7 and Figure4 ordering information. Retained original revision visually reviewed; not a claim of latest revision. · Rev 1.11.1 · 2018-07-02Official PDF ↗Package & pinoutUG865 — Zynq-7000 SoC Packaging and Pinout Product Specificationpp9–11 Tables1-1,1-3,1-4; p27 original device/package pin-file links; p88 Figure4-12 FFG676 for XC7Z035/XC7Z045; pp89–90 Figures4-13/4-14 FFG900 lid variants. Body and pitch only; no lid variant inferred for a lot. · Rev 1.9 · 2021-07-28Official PDF ↗Lifecycle / discontinuation noticeXCN20011 — Selected Package Product Discontinuation Noticep4 Table6 Replacement Part columns in left and right blocks. Ten exact non-L XC7Z035 G codes visually reviewed; not affected V codes or current supply evidence. · Rev 1.0 · 2020-09-28Official PDF ↗Package & pinoutAMD XC7Z035 FFG676 official package pinoutHeader device/package identity; 676 unique physical pin rows counted. Linked from UG865 p27. Historical pin file, not a PCB footprint. · Rev Header 2014-11-18 · 2014-11-18Official pinout text ↗Selection & orderingDS191 — Zynq-7000 SoC DC and AC Switching Characteristics (Z-7030/35/45/100)pp3–4 Table2 and its notes; p58 Table70 DSP48E1. Historical revision; use applicable current manufacturer limits for final design. · Rev 1.18.1 · 2018-07-02Official PDF ↗

Full ordering-number evidence: p4 Table6 Replacement Part column; left block, literal XC7Z035-1FFG676C. Original PDF table visually inspected..

Manufacturer documents may be revised. Verify the current revision and applicable device/package/grade before releasing a design.

DEVICE & PACKAGE DECISION

A matching DSP count can hide a LUT shortfall

XC7Z035 and XC7Z045 both list 900 DSP slices, but their LUT counts differ. Screen the fitted logic and memory requirements before treating the smaller SoC as a cost candidate.

Engineering screening guidance using reviewed catalogue evidence. Examples are hypothetical and advisory; validate your actual design and the exact ordering code.

Check a logic budget independently of multipliers

A hypothetical implementation uses 160,000 LUTs before integration. Adding 12,000 LUTs for control and interfaces gives 172,000, exceeding the XC7Z035 table count of 171,900 by 100. The same design may have enough DSP slices and still fail this basic resource screen. Reducing the count by 100 would only remove this particular arithmetic conflict; routability, placement, clocking and timing still require a new implementation. Keep the synthesis report and target device beside the purchase decision.

Carry a controlled comparison into the purchase request

Keep XC7Z035-1FFG676C intact when requesting a quotation. XCN20011 Table6 lists this exact G package as a historical replacement recommendation, not as the discontinued V ordering code. Current lifecycle, inventory, price, lead time and offered-lot evidence remain unconfirmed. The linked XC7Z045-1FFG676C is already public and provides a same-package resource comparison: its 350K vendor logic cells, 218,600 LUTs and 545 RAM blocks differ from this XC7Z035's 275K, 171,900 and 500. Both have 900 DSP slices. Those facts do not approve a board, bitstream or software substitution. This C option uses the cited 0 to +85 °C junction range. Preserve the source revision, implementation assumptions and engineering disposition beside the purchase line.

Hypothetical example: Parallel signal budget

Assumed inputs: 8 interfaces × 24 single-ended signals + 36 control signals + 16 reserved signals.

Calculation: 8 × 24 + 36 + 16 = 244 I/O.

Result: 6 I/O remain in the count-only budget (97.6% allocated).

Planning diagram: assumed I/O allocation
244 I/O assumed allocation / 250 documented package I/O; 6 I/O unallocated. Count-only planning diagram, not a pinout or bank assignment.
I/O budget for 244 allocated signals244 I/O assumed allocation / 250 documented package I/O; 6 I/O unallocated. Count-only planning diagram, not a pinout or bank assignment.

97.6% of the sourced package count allocated; 6 I/O unallocated.

Each signal consumes one single-ended user I/O in this example. Dedicated serial lanes are separate. Bank voltage, differential pairing, clocks, configuration use and actual pin allocation can reduce usable capacity. Reserved signals here are an assumed design allowance, not manufacturer-reserved pins.

Hypothetical example: Sample-buffer payload

Assumed inputs: 8 channels × 4096 samples/channel × 16 bits/sample.

Calculation: 8 × 4096 × 16 = 524,288 payload bits.

Result: Allocate at least 524,288 payload bits before adding memory overhead. The current reviewed embedded-memory reference is 18,000 Kb.

Payload arithmetic only. The source Kb/kb unit is retained; this example does not choose a decimal/binary conversion or claim a percentage fit. Round each buffer to the native memory-block geometry and check port width, depth, ECC/parity, dual-port use and implementation reports.

Public device and ordering comparisons

Compare exact package and grade conditions below. These are screening references; matching names, dimensions or resource counts do not establish pin compatibility or replacement approval.

XC7Z035-1FFG676C and already-public screening candidates
Condition / resourceXC7Z035-1FFG676C (selected)zynq-7000 / XC7Z035XC7Z045-1FFG676Czynq-7000 / XC7Z045
PackageFFG676 [source]FFG676 [source]
Speed grade-1 [source]-1 [source]
GradeCommercial (C) [source]Commercial (C) [source]
Operating temperature (see basis/conditions)0 to +85 °C [source]0 to +85 °C [source]
Temperature basisJunction temperature (Tj) [source]Junction temperature (Tj) [source]
Body dimensions27 × 27 mm [source]27 × 27 mm [source]
Pitch1 mm [source]1 mm [source]
Package user I/O250 I/O [source]250 I/O [source]
Package dedicated channels8 GTX channels [source]8 GTX channels [source]
Logic cells (AMD)275,000 logic cells [source]350,000 logic cells [source]
Embedded block memory18,000 Kb [source]19,620 Kb [source]
Core rail reference0.97 to 1.03 V [source]0.97 to 1.03 V [source]

Native LUT4, LE and logic-cell metrics remain separate. Temperature is not converted to ambient; source notes define the operating basis. A family maximum is never substituted for package I/O or channels. No clock, power or stock figure is inferred.

Sources and conditions: XC7Z035-1FFG676C

Lifecycle / ordering: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Sources and conditions: XC7Z045-1FFG676C

Package and grade labels match; pinout, electrical limits, timing and configuration compatibility still require verification.

Lifecycle / ordering: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Exact identity evidence: XCN20011 — Selected Package Product Discontinuation Notice · p4 Table6 Replacement Part column; left block, literal XC7Z035-1FFG676C. Original PDF table visually inspected. · Historical replacement recommendation only; not an affected-device EOL assertion, current availability or compatibility approval.

Practical questions for this selection

Does the larger device have the same resource balance?

No. The cited XC7Z045 has 218,600 LUTs and 545 RAM blocks, compared with 171,900 LUTs and 500 blocks here. Both list 900 DSP slices; equal DSP counts do not make their implementations interchangeable.

What does the numerical example establish for XC7Z035-1FFG676C?

It establishes arithmetic under the explicitly hypothetical inputs shown here. It is not a tool result, synthesis report, timing closure, pin-assignment validation or application qualification. Replace the assumptions with your signal list and memory geometry, then validate in the vendor tools.

Selection guide updated (UTC). Manufacturer-document revisions are listed separately.

Before placing this part on a board

  1. Use the full ordering number. Check the package pinout, power banks, speed grade and temperature range together.
  2. Complete timing and power analysis. A resource table cannot predict achievable frequency or application power.
  3. Define the manufacturing scope. Share the BGA footprint, stack-up, assembly requirements and test plan with your PCBA request.
Plan assembly for your FPGA board →

FROM SELECTION TO A BOARD

Design resources & implementation options

When to evaluate another implementation

For software-heavy control with limited parallel I/O, assess an MCU or processor against the same latency, interface and power requirements. For wide parallel datapaths or custom timing, compare FPGA architectures using a mapped design. For early prototyping, an evaluation board may reduce initial hardware work; verify its exact device, accessible interfaces and production suitability.

Explore semiconductor brands and product categories →

ENGINEERING SHORTLIST

Screen candidates for your design

Choose what may change before comparing resources. The default keeps the same manufacturer and family, so Zynq processing-system designs are not silently matched to pure FPGAs. Same-family results still require CPU, software, pinout and timing review.

29 full MPNs meet the selected scope and numeric constraints. Showing 2 device representatives, at most two per manufacturer, ordered by smallest excess resources. Temperature, timing and pinout still require review.

Numeric screening is not replacement approval.

Logic and DSP mapping, pinout, bank voltages, temperature, timing, protocol support and toolchain remain engineering checks. Serial channel quantity does not verify data rate or protocol support. Cross-brand candidates generally require board and HDL review.

Request a board and sourcing review →
Source addresses and citation trail

Full source addresses are retained below. Read each citation with its document revision, page, table and applicability conditions above.

  1. https://docs.amd.com/api/khub/documents/juMnxca71Tf2gfjmNyjM8A/content
  2. https://docs.amd.com/api/khub/documents/kOAtMqkVamwUDaIfCXO91A/content
  3. https://www.digikey.com/en/products?keywords=XC7Z035-1FFG676C
  4. https://www.mouser.com/c/?q=XC7Z035-1FFG676C
  5. https://uk.farnell.com/search?st=XC7Z035-1FFG676C
  6. https://www.arrow.com/en/products/search?q=XC7Z035-1FFG676C
  7. https://docs.amd.com/api/khub/documents/JoZLm9nfmlncXLgvQKL~sw/content
  8. https://download.amd.com/adaptive-socs-and-fpgas/developer/adaptive-socs-and-fpgas/package-pinout-files/z7packages/xc7z035ffg676pkg.txt
  9. https://docs.amd.com/api/khub/documents/0QG6MaFUXxeum~9JNcCOPw/content