FPGA DEVICES · ENGINEERING · SOURCING Source-linked information. Clear project requirements.

AMD / Xilinx / Zynq-7000 SoC

XC7Z045-1FBG676C

FBG676 · Commercial (C) · Speed grade -1

Lifecycle & ordering review: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation. Evidence and conditions ↓

Core fields reviewed 2026-11-14
Source links and conditions accompany each parameter.

XC7Z045-1FBG676C: 12 requested / 8 exposed GTX channels. FFG900 comparison exposes 16.
Technical schematic12 requested / 8 exposed GTX channels. FFG900 comparison exposes 16. Original educational schematic; assumptions are not test results. Not a pinout or footprint. Technical references ↗

FPGA.io Part Number FIO-416219C56387E0FBInternal catalogue reference · manufacturer MPN remains unchanged

Logic cells
350000 logic cells
Block RAM capacity
19620 Kb
DSP slices
900 DSP48E1
User I/O in this package
250 I/O

SOURCING REFERENCES

Price & delivery references

Get Price & Lead Time ↗

No verified supplier stock or price is currently displayed here. Request a quotation for your quantity and required delivery date.

Check this exact MPN at external distributors

Search links do not establish stock, price or an authorized distribution relationship. Check the full code, package and grade at the source.

PRODUCT OVERVIEW

About XC7Z045-1FBG676C

XC7Z045-1FBG676C is a system-on-chip combining an Arm processing system and FPGA programmable logic in the AMD / Xilinx Zynq-7000 SoC family, supplied in the FBG676 package. Its reviewed resources include 350,000 logic cells, 19,620 Kb of block RAM, 250 I/O for this device/package combination. This ordering code specifies speed grade -1 and Commercial (C) temperature grade. The selected device/package has 8 GTX channels; check this package-level limit before planning serial interfaces. The user-I/O figure here refers to PL SelectIO only. The 128 PS I/O in UG865 are a separate functional allocation, not interchangeable general-purpose PL pins. Use the linked manufacturer data sheets for electrical limits, pin assignments and timing. FPGA.io can review the complete part number for chip sourcing or a combined sourcing and PCBA project.

  • Logic cells350,000 logic cells
  • Block RAM capacity19,620 Kb
  • DSP slices900 DSP48E1
  • User I/O in this package250 I/O
  • Package codeFBG676
  • Junction temperature (Tj)0 to +85 °C
Review parameter sources and conditions ↓

Technical specifications

XC7Z045 SoC PL resources; FBG676 package I/O, GTX, physical balls, body and pitch; exact historical ordering identity and grade conditions. Current supply unknown.

Logic & memory

ParameterValueScope / evidence
Logic cells350000 logic cellsdeviceDS190Z035 ↗p3 Table1 XC7Z045 Logic Cells row
Conditions

Rounded vendor figure 350K; not a LUT count.

6-input LUTs218600 LUT6deviceDS190Z035 ↗p3 Table1 XC7Z045 Look-Up Tables row
Block RAM capacity19620 KbderivedDS190Z035 ↗DS190 p3 Table1 XC7Z045: 545 blocks × 36 Kb
Conditions

Derived 19620 Kb; not bytes or a guaranteed mapped configuration.

36 Kb block RAM blocks545 blocksdeviceDS190Z035 ↗p3 Table1 XC7Z045 Block RAM row
Conditions

Each source block is 36 Kb.

DSP slices900 DSP48E1deviceDS190Z035 ↗p3 Table1 XC7Z045 DSP Slices row; DS191 p58 Table70 DSP48E1 architecture cross-check
Conditions

900 DSP slices; count is not throughput.

Package & interfaces

ParameterValueScope / evidence
User I/O in this package250 I/Odevice-packageUG865Z035 ↗p11 Table1-4 XC7Z045 / FBG676
Conditions

PL SelectIO: 100 HR + 150 HP. Separate 128 PS I/O. Differential pairs are alternate uses, not additional pins.

Serial transceivers in this package8 GTX channelsdevice-packageUG865Z035 ↗p10 Table1-3 XC7Z045 / FBG676
Conditions

8 exposed GTX channels for this device/package; protocol qualification is separate.

Package codeFBG676MPNXCN20011Z035 ↗XCN20011 v1.0 p4 Table6 literal XC7Z045-1FBG676C in Replacement Part column.
Conditions

Historical replacement code, not the affected V package code.

Package ball count676 ballspackagePINS-XC7Z045-FBG676 ↗Header xc7z045fbg676; 676 distinct pin rows counted
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

Package body27 × 27 mmpackageUG865Z035 ↗UG865 v1.9 p9 Table1-1 FBG676 package group
Conditions

Nominal package body only. Exact outline, height, thermal interface and PCB courtyard require separate review.

Ball pitch1 mmpackageUG865Z035 ↗UG865 v1.9 p9 Table1-1 FBG676
Conditions

Nominal ball pitch. A body drawing is not a fabrication-ready land pattern.

Package terminals / leads (vendor count)676 pinspackagePINS-XC7Z045-FBG676 ↗Header xc7z045fbg676; 676 distinct pin rows counted
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

Operating conditions

ParameterValueScope / evidence
Speed grade-1MPNXCN20011Z035 ↗XCN20011 v1.0 p4 Table6 literal XC7Z045-1FBG676C in Replacement Part column.
Conditions

DS190 p23 Table7 cross-checks permitted grade combinations. Not a single application clock rating.

Junction temperature (Tj)0 to +85 °CgradeDS191Z035 ↗p4 Table2 Tj C row
Conditions

Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.

Temperature gradeCommercial (C)MPNDS190Z035 ↗p23 Table7 XC7Z045 group and Figure4; exact letter in XCN20011 p4
Core voltage conditions0.97 to 1.03 VgradeDS191Z035 ↗p3 Table2 VCCINT for -3/-2/-1
Conditions

PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.

Maximum application clockNot confirmeddesign
Conditions

Design-specific timing not established.

Application powerNot confirmeddesign
Conditions

Workload, implementation and thermal analysis required.

Minimum junction temperature0 °CgradeDS191Z035 ↗p4 Table2 Tj C row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

Maximum junction temperature85 °CgradeDS191Z035 ↗p4 Table2 Tj C row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

Temperature referenceJunction temperature (Tj)gradeDS191Z035 ↗p4 Table2 Tj rows
Conditional temperature operationRecommended operating Tj rangegradeDS191Z035 ↗p4 Table2 Tj C row
Conditions

DS191 Table2 and applicable notes. No extended or over-temperature qualification is asserted.

Minimum core voltage0.97 VgradeDS191Z035 ↗p3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Nominal core voltage1 VgradeDS191Z035 ↗p3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Maximum core voltage1.03 VgradeDS191Z035 ↗p3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Supply & status

ParameterValueScope / evidence
Current lifecycleNot confirmedsupplyXCN20011Z035 ↗p4 Table6 replacement-part columns
Conditions

Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Available stockNot confirmedsupply
Conditions

Current inventory, USD price and lead time are not verified. Request a quotation for the full ordering code.

MANUFACTURER REFERENCES

Official documents & PDF datasheets

Use the electrical data sheet together with the device overview and package/pinout information.

Data sheet / device referenceDS190 — Zynq-7000 SoC Data Sheet: Overviewp3 Table1 XC7Z030/XC7Z035/XC7Z045 column; p23 Table7 and Figure4 ordering information. Retained original revision visually reviewed; not a claim of latest revision. · Rev 1.11.1 · 2018-07-02Official PDF ↗Package & pinoutUG865 — Zynq-7000 SoC Packaging and Pinout Product Specificationpp9-11 Tables1-1,1-3,1-4: exact package body, pitch, PL bank split, PS I/O and GTX; p27 pin-file links. Historical v1.9. · Rev 1.9 · 2021-07-28Official PDF ↗Lifecycle / discontinuation noticeXCN20011 — Selected Package Product Discontinuation Noticep4 Table6 exact G replacement-column ordering codes. These are not the affected V codes. Historical identity only; current lifecycle and supply unknown. · Rev 1.0 · 2020-09-28Official PDF ↗Package & pinoutAMD XC7Z045 FBG676 package pinoutUG865 p27 link; exact header and 676 unique physical pins counted. · Rev Device/Package xc7z045fbg676 9/18/2012 10:02:27Official pinout text ↗Selection & orderingDS191 — Zynq-7000 SoC DC and AC Switching Characteristics (Z-7030/35/45/100)pp3–4 Table2 and its notes; p58 Table70 DSP48E1. Historical revision; use applicable current manufacturer limits for final design. · Rev 1.18.1 · 2018-07-02Official PDF ↗

Full ordering-number evidence: XCN20011 v1.0 p4 Table6 literal XC7Z045-1FBG676C in Replacement Part column..

Manufacturer documents may be revised. Verify the current revision and applicable device/package/grade before releasing a design.

DEVICE & PACKAGE DECISION

Count channels before treating the 676 package as a 900

The XC7Z045 source table exposes eight GTX channels in the 676 package and sixteen in FFG900. A hypothetical twelve-channel plan exceeds the smaller package by four even though both use the same base silicon name.

Engineering screening guidance using reviewed catalogue evidence. Examples are hypothetical and advisory; validate your actual design and the exact ordering code.

Work the decision before changing the purchase line

The XC7Z045 source table exposes eight GTX channels in the 676 package and sixteen in FFG900. A hypothetical twelve-channel plan exceeds the smaller package by four even though both use the same base silicon name. These numbers are an explicitly hypothetical planning case, except for the cited device limits and package facts. Replace the assumptions with your signal matrix, implemented resource report or controlled operating requirement. Keep the reason for any rejected candidate and the evidence needed to reopen it. A count or arithmetic pass is an early screening result; it does not establish routing, application timing, thermal behavior or suitability of a supplied lot.

Carry the full ordering code and source scope into review

XC7Z045-1FBG676C appears in the replacement column of XCN20011 v1.0, 2020-09-28, Table6. That historical listing does not place this G code in the affected V-code group and does not establish present lifecycle or stock. Compare XC7Z045-1FFG676C using the linked record, then review exact package, ball map, grade, power rails and controlled implementation files. DS190 v1.11.1 supplies the PL resource counts; DS191 v1.18.1 supplies the grade-specific operating conditions; UG865 v1.9 supplies the package mapping. Historical revisions are identified so the engineer can check the revision applicable to the final design. Request quantity, traceability and acceptance evidence for the offered full code; current price, availability and delivery remain subject to quotation.

Hypothetical example: Parallel signal budget

Assumed inputs: 8 interfaces × 24 single-ended signals + 24 control signals + 16 reserved signals.

Calculation: 8 × 24 + 24 + 16 = 232 I/O.

Result: 18 I/O remain in the count-only budget (92.8% allocated).

Planning diagram: assumed I/O allocation
232 I/O assumed allocation / 250 documented package I/O; 18 I/O unallocated. Count-only planning diagram, not a pinout or bank assignment.
I/O budget for 232 allocated signals232 I/O assumed allocation / 250 documented package I/O; 18 I/O unallocated. Count-only planning diagram, not a pinout or bank assignment.

92.8% of the sourced package count allocated; 18 I/O unallocated.

Each signal consumes one single-ended user I/O in this example. Dedicated serial lanes are separate. Bank voltage, differential pairing, clocks, configuration use and actual pin allocation can reduce usable capacity. Reserved signals here are an assumed design allowance, not manufacturer-reserved pins.

Hypothetical example: Sample-buffer payload

Assumed inputs: 16 channels × 4096 samples/channel × 16 bits/sample.

Calculation: 16 × 4096 × 16 = 1,048,576 payload bits.

Result: Allocate at least 1,048,576 payload bits before adding memory overhead. The current reviewed embedded-memory reference is 19,620 Kb.

Payload arithmetic only. The source Kb/kb unit is retained; this example does not choose a decimal/binary conversion or claim a percentage fit. Round each buffer to the native memory-block geometry and check port width, depth, ECC/parity, dual-port use and implementation reports.

Public device and ordering comparisons

Compare exact package and grade conditions below. These are screening references; matching names, dimensions or resource counts do not establish pin compatibility or replacement approval.

XC7Z045-1FBG676C and already-public screening candidates
Condition / resourceXC7Z045-1FBG676C (selected)zynq-7000 / XC7Z045XC7Z045-1FFG676Czynq-7000 / XC7Z045
PackageFBG676 [source]FFG676 [source]
Speed grade-1 [source]-1 [source]
GradeCommercial (C) [source]Commercial (C) [source]
Operating temperature (see basis/conditions)0 to +85 °C [source]0 to +85 °C [source]
Temperature basisJunction temperature (Tj) [source]Junction temperature (Tj) [source]
Body dimensions27 × 27 mm [source]27 × 27 mm [source]
Pitch1 mm [source]1 mm [source]
Package user I/O250 I/O [source]250 I/O [source]
Package dedicated channels8 GTX channels [source]8 GTX channels [source]
Logic cells (AMD)350,000 logic cells [source]350,000 logic cells [source]
Embedded block memory19,620 Kb [source]19,620 Kb [source]
Core rail reference0.97 to 1.03 V [source]0.97 to 1.03 V [source]

Native LUT4, LE and logic-cell metrics remain separate. Temperature is not converted to ambient; source notes define the operating basis. A family maximum is never substituted for package I/O or channels. No clock, power or stock figure is inferred.

Sources and conditions: XC7Z045-1FBG676C

Lifecycle / ordering: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Sources and conditions: XC7Z045-1FFG676C

Package: FBG676 → FFG676. Verify the applicable limits and design impact.

Lifecycle / ordering: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Exact identity evidence: XCN20011 — Selected Package Product Discontinuation Notice · XCN20011 v1.0 p4 Table6 literal XC7Z045-1FBG676C in Replacement Part column. · Historical replacement recommendation only; not an affected-device EOL assertion, current availability or compatibility approval.

Practical questions for this selection

Can the speed grade restore the missing channels?

No. Speed and package exposure are separate selections. Check reference clocks, banks, protocol IP and routing before choosing another package.

What does the numerical example establish for XC7Z045-1FBG676C?

It establishes arithmetic under the explicitly hypothetical inputs shown here. It is not a tool result, synthesis report, timing closure, pin-assignment validation or application qualification. Replace the assumptions with your signal list and memory geometry, then validate in the vendor tools.

Selection guide updated (UTC). Manufacturer-document revisions are listed separately.

Before placing this part on a board

  1. Use the full ordering number. Check the package pinout, power banks, speed grade and temperature range together.
  2. Complete timing and power analysis. A resource table cannot predict achievable frequency or application power.
  3. Define the manufacturing scope. Share the BGA footprint, stack-up, assembly requirements and test plan with your PCBA request.
Plan assembly for your FPGA board →

FROM SELECTION TO A BOARD

Design resources & implementation options

When to evaluate another implementation

For software-heavy control with limited parallel I/O, assess an MCU or processor against the same latency, interface and power requirements. For wide parallel datapaths or custom timing, compare FPGA architectures using a mapped design. For early prototyping, an evaluation board may reduce initial hardware work; verify its exact device, accessible interfaces and production suitability.

Explore semiconductor brands and product categories →

ENGINEERING SHORTLIST

Screen candidates for your design

Choose what may change before comparing resources. The default keeps the same manufacturer and family, so Zynq processing-system designs are not silently matched to pure FPGAs. Same-family results still require CPU, software, pinout and timing review.

14 full MPNs meet the selected scope and numeric constraints. Showing 1 device representatives, at most two per manufacturer, ordered by smallest excess resources. Temperature, timing and pinout still require review.

350000 logic cells · FBG676 · Industrial (I)

Differences and compatibility checks
  • Temperature grade: Commercial (C) → Industrial (I). Verify the applicable limits and design impact.

Numeric matches do not establish pin compatibility, protocol support, lifecycle or supply availability.

Numeric screening is not replacement approval.

Logic and DSP mapping, pinout, bank voltages, temperature, timing, protocol support and toolchain remain engineering checks. Serial channel quantity does not verify data rate or protocol support. Cross-brand candidates generally require board and HDL review.

Request a board and sourcing review →
Source addresses and citation trail

Full source addresses are retained below. Read each citation with its document revision, page, table and applicability conditions above.

  1. https://docs.amd.com/api/khub/documents/juMnxca71Tf2gfjmNyjM8A/content
  2. https://docs.amd.com/api/khub/documents/kOAtMqkVamwUDaIfCXO91A/content
  3. https://www.digikey.com/en/products?keywords=XC7Z045-1FBG676C
  4. https://www.mouser.com/c/?q=XC7Z045-1FBG676C
  5. https://uk.farnell.com/search?st=XC7Z045-1FBG676C
  6. https://www.arrow.com/en/products/search?q=XC7Z045-1FBG676C
  7. https://docs.amd.com/api/khub/documents/JoZLm9nfmlncXLgvQKL~sw/content
  8. https://download.amd.com/adaptive-socs-and-fpgas/developer/adaptive-socs-and-fpgas/package-pinout-files/z7packages/xc7z045fbg676pkg.txt
  9. https://docs.amd.com/api/khub/documents/0QG6MaFUXxeum~9JNcCOPw/content