FPGA DEVICES · ENGINEERING · SOURCING Source-linked information. Clear project requirements.

SIDE-BY-SIDE REVIEW

Compare FPGA devices

Review resource differences, package constraints and the fields that still need confirmation.

Select devices (2–4)
Reviewed full part numbers

Showing up to 40 search results plus your selected devices. Search the full catalogue above to find another MPN.

Quote these devices ↗
Parameter / statusXC7Z035-1FFG676CZynq-7000 SoCXC7Z035-2FFG676EZynq-7000 SoC
Logic cellsSame275000 logic cellsDS190Z035 ↗ · devicep3 Table1 XC7Z035 Logic Cells row
Conditions

Rounded vendor figure 275K, not a LUT count.

275000 logic cellsDS190Z035 ↗ · devicep3 Table1 XC7Z035 Logic Cells row
Conditions

Rounded vendor figure 275K, not a LUT count.

6-input LUTsSame171900 LUT6DS190Z035 ↗ · devicep3 Table1 XC7Z035 Look-Up Tables row171900 LUT6DS190Z035 ↗ · devicep3 Table1 XC7Z035 Look-Up Tables row
Block RAM capacitySame18000 KbDS190Z035 ↗ · derivedp3 Table1 XC7Z035 500 × 36 Kb blocks
Conditions

Derived 500 × 36 = 18000 Kb; source headline rounded 17.6 Mb. Not bytes or a guaranteed memory configuration.

18000 KbDS190Z035 ↗ · derivedp3 Table1 XC7Z035 500 × 36 Kb blocks
Conditions

Derived 500 × 36 = 18000 Kb; source headline rounded 17.6 Mb. Not bytes or a guaranteed memory configuration.

36 Kb block RAM blocksSame500 blocksDS190Z035 ↗ · devicep3 Table1 XC7Z035 Block RAM row
Conditions

Each source block is 36 Kb.

500 blocksDS190Z035 ↗ · devicep3 Table1 XC7Z035 Block RAM row
Conditions

Each source block is 36 Kb.

DSP slicesSame900 DSP48E1DS190Z035 ↗ · devicep3 Table1 XC7Z035 DSP Slices row; DS191 p58 Table70 DSP48E1 architecture cross-check
Conditions

900 slices; count does not establish application throughput.

900 DSP48E1DS190Z035 ↗ · devicep3 Table1 XC7Z035 DSP Slices row; DS191 p58 Table70 DSP48E1 architecture cross-check
Conditions

900 slices; count does not establish application throughput.

User I/O in this packageSame250 I/OUG865Z035 ↗ · device-packagep11 Table1-4 XC7Z035 / FFG676
Conditions

PL SelectIO only: 100 HR + 150 HP. Separate 128 PS I/O are not interchangeable PL pins. Differential counts are alternate uses, not additive.

250 I/OUG865Z035 ↗ · device-packagep11 Table1-4 XC7Z035 / FFG676
Conditions

PL SelectIO only: 100 HR + 150 HP. Separate 128 PS I/O are not interchangeable PL pins. Differential counts are alternate uses, not additive.

Serial transceivers in this packageSame8 GTX channelsUG865Z035 ↗ · device-packagep10 Table1-3 XC7Z035 / FFG676
Conditions

8 exposed GTX channels; neither a family maximum nor a protocol qualification.

8 GTX channelsUG865Z035 ↗ · device-packagep10 Table1-3 XC7Z035 / FFG676
Conditions

8 exposed GTX channels; neither a family maximum nor a protocol qualification.

Package codeSameFFG676XCN20011Z035 ↗ · MPNp4 Table6 Replacement Part column; left block, literal XC7Z035-1FFG676C. Original PDF table visually inspected.
Conditions

Historical replacement code, not the affected V package code.

FFG676XCN20011Z035 ↗ · MPNp4 Table6 Replacement Part column; left block, literal XC7Z035-2FFG676E. Original PDF table visually inspected.
Conditions

Historical replacement code, not the affected V package code.

Package ball countSame676 ballsPINSZ035676 ↗ · packageHeader xc7z035ffg676; 676 distinct physical package-pin rows
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

676 ballsPINSZ035676 ↗ · packageHeader xc7z035ffg676; 676 distinct physical package-pin rows
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

Package bodySame27 × 27 mmUG865Z035 ↗ · packagep88 Figure4-12 (XC7Z035/XC7Z045 FFG676), D and E
Conditions

Package body only, excluding PCB courtyard. For FFG900, cited lid variants share this body size; no lid variant is inferred for a supplied lot.

27 × 27 mmUG865Z035 ↗ · packagep88 Figure4-12 (XC7Z035/XC7Z045 FFG676), D and E
Conditions

Package body only, excluding PCB courtyard. For FFG900, cited lid variants share this body size; no lid variant is inferred for a supplied lot.

Ball pitchSame1 mmUG865Z035 ↗ · packagep88 Figure4-12, e
Conditions

Nominal ball pitch. A body drawing is not a fabrication-ready land pattern.

1 mmUG865Z035 ↗ · packagep88 Figure4-12, e
Conditions

Nominal ball pitch. A body drawing is not a fabrication-ready land pattern.

Package terminals / leads (vendor count)Same676 pinsPINSZ035676 ↗ · packageHeader xc7z035ffg676; 676 distinct physical package-pin rows
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

676 pinsPINSZ035676 ↗ · packageHeader xc7z035ffg676; 676 distinct physical package-pin rows
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

Speed gradeDifferent-1XCN20011Z035 ↗ · MPNp4 Table6 exact literal XC7Z035-1FFG676C
Conditions

DS190 p23 Table7 cross-checks permitted grade combinations. Not a single application clock rating.

-2XCN20011Z035 ↗ · MPNp4 Table6 exact literal XC7Z035-2FFG676E
Conditions

DS190 p23 Table7 cross-checks permitted grade combinations. Not a single application clock rating.

Junction temperature (Tj)Different0 to +85 °CDS191Z035 ↗ · gradep4 Table2 Tj C row
Conditions

Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.

0 to +100 °CDS191Z035 ↗ · gradep4 Table2 Tj E row
Conditions

Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.

Temperature gradeDifferentCommercial (C)DS190Z035 ↗ · MPNp23 Table7 XC7Z035 group and Figure4; exact letter in XCN20011 p4Extended (E)DS190Z035 ↗ · MPNp23 Table7 XC7Z035 group and Figure4; exact letter in XCN20011 p4
Core voltage conditionsSame0.97 to 1.03 VDS191Z035 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.

0.97 to 1.03 VDS191Z035 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.

Maximum application clockUnconfirmed dataNot confirmed
Conditions

Design-specific timing not established.

Not confirmed
Conditions

Design-specific timing not established.

Application powerUnconfirmed dataNot confirmed
Conditions

Workload, implementation and thermal analysis required.

Not confirmed
Conditions

Workload, implementation and thermal analysis required.

Minimum junction temperatureSame0 °CDS191Z035 ↗ · gradep4 Table2 Tj C row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

0 °CDS191Z035 ↗ · gradep4 Table2 Tj E row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

Maximum junction temperatureDifferent85 °CDS191Z035 ↗ · gradep4 Table2 Tj C row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

100 °CDS191Z035 ↗ · gradep4 Table2 Tj E row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

Temperature referenceSameJunction temperature (Tj)DS191Z035 ↗ · gradep4 Table2 Tj rowsJunction temperature (Tj)DS191Z035 ↗ · gradep4 Table2 Tj rows
Conditional temperature operationSameRecommended operating Tj rangeDS191Z035 ↗ · gradep4 Table2 Tj C row
Conditions

DS191 Table2 and applicable notes. No extended or over-temperature qualification is asserted.

Recommended operating Tj rangeDS191Z035 ↗ · gradep4 Table2 Tj E row
Conditions

DS191 Table2 and applicable notes. No extended or over-temperature qualification is asserted.

Minimum core voltageSame0.97 VDS191Z035 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

0.97 VDS191Z035 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Nominal core voltageSame1 VDS191Z035 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

1 VDS191Z035 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Maximum core voltageSame1.03 VDS191Z035 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

1.03 VDS191Z035 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Current lifecycleUnconfirmed dataNot confirmedXCN20011Z035 ↗ · supplyp4 Table6 replacement-part columns
Conditions

Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Not confirmedXCN20011Z035 ↗ · supplyp4 Table6 replacement-part columns
Conditions

Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Available stockUnconfirmed dataNot confirmed
Conditions

Current inventory, USD price and lead time are not verified. Request a quotation for the full ordering code.

Not confirmed
Conditions

Current inventory, USD price and lead time are not verified. Request a quotation for the full ordering code.

Comparison is not replacement approval.

Check pinout, bank voltages, configuration, tool support, timing, thermal design and lifecycle before changing a part. Different vendors’ logic and DSP counts need architecture-specific interpretation.

Keep the differences with your decision

Export the selected public MPNs and key evidence states. This is a planning snapshot, not engineering approval; the full source conditions remain on each device page.