Lifecycle & ordering review: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation. Evidence and conditions ↓
Core fields reviewed 2026-11-13 Source links and conditions accompany each parameter.
Technical schematic4 + 4 + 1 = 9 requested GTX channels. FFG676 exposes 8; one channel short. Original educational schematic; calculations are hypothetical where shown. Not to scale, not a pinout or PCB footprint. Technical references ↗
FPGA.io Part NumberFIO-D4A706B90171234AInternal catalogue reference · manufacturer MPN remains unchanged
XC7Z035-2FFG676I is a system-on-chip combining an Arm processing system and FPGA programmable logic in the AMD / Xilinx Zynq-7000 SoC family, supplied in the FFG676 package. Its reviewed resources include 275,000 logic cells, 18,000 Kb of block RAM, 250 I/O for this device/package combination. This ordering code specifies speed grade -2 and Industrial (I) temperature grade. The selected device/package has 8 GTX channels; check this package-level limit before planning serial interfaces. The user-I/O figure here refers to PL SelectIO only. The 128 PS I/O in UG865 are a separate functional allocation, not interchangeable general-purpose PL pins. Use the linked manufacturer data sheets for electrical limits, pin assignments and timing. FPGA.io can review the complete part number for chip sourcing or a combined sourcing and PCBA project.
Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.
Temperature grade
Industrial (I)
MPNDS190Z035 ↗p23 Table7 XC7Z035 group and Figure4; exact letter in XCN20011 p4
Core voltage conditions
0.97 to 1.03 V
gradeDS191Z035 ↗p3 Table2 VCCINT for -3/-2/-1Conditions
PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.
Maximum application clock
Not confirmed
designConditions
Design-specific timing not established.
Application power
Not confirmed
designConditions
Workload, implementation and thermal analysis required.
Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.
Available stock
Not confirmed
supplyConditions
Current inventory, USD price and lead time are not verified. Request a quotation for the full ordering code.
MANUFACTURER REFERENCES
Official documents & PDF datasheets
Use the electrical data sheet together with the device overview and package/pinout information.
Full ordering-number evidence: p4 Table6 Replacement Part column; right block, literal XC7Z035-2FFG676I. Original PDF table visually inspected..
Manufacturer documents may be revised. Verify the current revision and applicable device/package/grade before releasing a design.
DEVICE & PACKAGE DECISION
Account for the ninth serial channel before routing
FFG676 exposes eight GTX channels for XC7Z035. Dedicated serial channels and PL SelectIO are different resources; unused general-purpose pins do not create another GTX channel.
Engineering screening guidance using reviewed catalogue evidence. Examples are hypothetical and advisory; validate your actual design and the exact ordering code.
Allocate every channel and its reference clock
Two hypothetical four-channel full-duplex subsystems allocate eight GTX channels. Adding a third subsystem that needs one dedicated channel takes the request to nine, one above this package count. Record transmit and receive direction, protocol IP, supported rate, reference clocks and placement for each allocation. The four-channel assumption is an architectural input, not a claim that a named interface is supported. Review a different package or an interface redesign only after checking the relevant source tables and board constraints.
Carry a controlled comparison into the purchase request
Keep XC7Z035-2FFG676I intact when requesting a quotation. XCN20011 Table6 lists this exact G package as a historical replacement recommendation, not as the discontinued V ordering code. Current lifecycle, inventory, price, lead time and offered-lot evidence remain unconfirmed. The linked XC7Z045-2FFG676I is already public and provides a same-package resource comparison: its 350K vendor logic cells, 218,600 LUTs and 545 RAM blocks differ from this XC7Z035's 275K, 171,900 and 500. Both have 900 DSP slices. Those facts do not approve a board, bitstream or software substitution. This I option uses the cited -40 to +100 °C junction range. Preserve the source revision, implementation assumptions and engineering disposition beside the purchase line.
Result: 18 I/O remain in the count-only budget (92.8% allocated).
Planning diagram: assumed I/O allocation 232 I/O assumed allocation / 250 documented package I/O; 18 I/O unallocated. Count-only planning diagram, not a pinout or bank assignment.
92.8% of the sourced package count allocated; 18 I/O unallocated.
Each signal consumes one single-ended user I/O in this example. Dedicated serial lanes are separate. Bank voltage, differential pairing, clocks, configuration use and actual pin allocation can reduce usable capacity. Reserved signals here are an assumed design allowance, not manufacturer-reserved pins.
Result: Allocate at least 1,048,576 payload bits before adding memory overhead. The current reviewed embedded-memory reference is 18,000 Kb.
Payload arithmetic only. The source Kb/kb unit is retained; this example does not choose a decimal/binary conversion or claim a percentage fit. Round each buffer to the native memory-block geometry and check port width, depth, ECC/parity, dual-port use and implementation reports.
Public device and ordering comparisons
Compare exact package and grade conditions below. These are screening references; matching names, dimensions or resource counts do not establish pin compatibility or replacement approval.
XC7Z035-2FFG676I and already-public screening candidates
Native LUT4, LE and logic-cell metrics remain separate. Temperature is not converted to ambient; source notes define the operating basis. A family maximum is never substituted for package I/O or channels. No clock, power or stock figure is inferred.
Sources and conditions: XC7Z035-2FFG676I
Lifecycle / ordering: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.
Package: FFG676.XCN20011 — Selected Package Product Discontinuation Notice · revision 1.0 · p4 Table6 Replacement Part column; right block, literal XC7Z035-2FFG676I. Original PDF table visually inspected. · scope: MPN. Historical replacement code, not the affected V package code.
Operating temperature (see basis/conditions): −40 to +100 °C.DS191 — Zynq-7000 SoC DC and AC Switching Characteristics (Z-7030/35/45/100) · revision 1.18.1 · p4 Table2 Tj I row · scope: grade. Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.
Body dimensions: 27 × 27 mm.UG865 — Zynq-7000 SoC Packaging and Pinout Product Specification · revision 1.9 · p88 Figure4-12 (XC7Z035/XC7Z045 FFG676), D and E · scope: package. Package body only, excluding PCB courtyard. For FFG900, cited lid variants share this body size; no lid variant is inferred for a supplied lot.
Core rail reference: 0.97 to 1.03 V.DS191 — Zynq-7000 SoC DC and AC Switching Characteristics (Z-7030/35/45/100) · revision 1.18.1 · p3 Table2 VCCINT for -3/-2/-1 · scope: grade. PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.
Sources and conditions: XC7Z045-2FFG676I
Package and grade labels match; pinout, electrical limits, timing and configuration compatibility still require verification.
Lifecycle / ordering: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.
Operating temperature (see basis/conditions): −40 to +100 °C.DS191 — Zynq-7000 SoC DC and AC Switching Characteristics (Z-7030/35/45/100) · revision 1.18.1 · p4 Table2 Tj I row · scope: grade. Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.
Body dimensions: 27 × 27 mm.UG865 — Zynq-7000 SoC Packaging and Pinout Product Specification · revision 1.9 · p88 Figure4-12 (XC7Z035/XC7Z045 FFG676), D and E · scope: package. Package body only, excluding PCB courtyard. For FFG900, cited lid variants share this body size; no lid variant is inferred for a supplied lot.
Core rail reference: 0.97 to 1.03 V.DS191 — Zynq-7000 SoC DC and AC Switching Characteristics (Z-7030/35/45/100) · revision 1.18.1 · p3 Table2 VCCINT for -3/-2/-1 · scope: grade. PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.
Exact identity evidence:XCN20011 — Selected Package Product Discontinuation Notice · p4 Table6 Replacement Part column; right block, literal XC7Z035-2FFG676I. Original PDF table visually inspected. · Historical replacement recommendation only; not an affected-device EOL assertion, current availability or compatibility approval.
Practical questions for this selection
Can a faster speed suffix fix the channel count?
No. A speed option is not an extra transceiver. Timing, supported protocol, lane allocation and board signal integrity require their own checks.
What does the numerical example establish for XC7Z035-2FFG676I?
It establishes arithmetic under the explicitly hypothetical inputs shown here. It is not a tool result, synthesis report, timing closure, pin-assignment validation or application qualification. Replace the assumptions with your signal list and memory geometry, then validate in the vendor tools.
For software-heavy control with limited parallel I/O, assess an MCU or processor against the same latency, interface and power requirements. For wide parallel datapaths or custom timing, compare FPGA architectures using a mapped design. For early prototyping, an evaluation board may reduce initial hardware work; verify its exact device, accessible interfaces and production suitability.
Choose what may change before comparing resources. The default keeps the same manufacturer and family, so Zynq processing-system designs are not silently matched to pure FPGAs. Same-family results still require CPU, software, pinout and timing review.
29 full MPNs meet the selected scope and numeric constraints. Showing 2 device representatives, at most two per manufacturer, ordered by smallest excess resources. Temperature, timing and pinout still require review.
Package: FFG676 → FBG676. Verify the applicable limits and design impact.
Temperature grade: Industrial (I) → Commercial (C). Verify the applicable limits and design impact.
Speed grade: -2 → -1. Verify the applicable limits and design impact.
Numeric matches do not establish pin compatibility, protocol support, lifecycle or supply availability.
Numeric screening is not replacement approval.
Logic and DSP mapping, pinout, bank voltages, temperature, timing, protocol support and toolchain remain engineering checks. Serial channel quantity does not verify data rate or protocol support. Cross-brand candidates generally require board and HDL review.
Closest documented device and package variants appear first. Package, grade and pinout may differ; these are comparison candidates, not approved replacements.