FPGA DEVICES · ENGINEERING · SOURCING Source-linked information. Clear project requirements.

PCB design & fabrication / T063

BGA escape review checklist

Prepare the evidence needed for a package fan-out and fabrication discussion.

Review checklistMethod v1 · 2026-09-27Method, limits & example ↓
Browser-local calculations Your inputs are processed on this device.Visible methods & limits Check assumptions before using a result.Explicit sharing Send a project only after reviewing the RFQ.
Device context: XC7Z035-2FFG676E

FFG676 · quantity not entered · service Electronic component sourcing. Return to the device evidence. This context is retained when you choose the enquiry form; it is not a completed device review.

01 / DEFINE THE REQUIREMENT

Design inputs

Example values loaded
Design inputs

The values below are examples. Replace them with your project inputs. Blank means unknown; enter zero only when it is a real design value.

02 / REVIEW THE OUTPUT

Your result

Planning output

Ready for an example run. Check the inputs, then run the tool.

Package, fan-out and via-process review items

  1. Confirm the values and units.
  2. Run the check to generate your output.
  3. Review limitations before exporting or sharing.

03 / METHOD & VERIFICATION

Understand the result.

Method version 1 · 2026-09-27

FPGA.io planning aid. Arithmetic and checklist output do not replace device documentation, a design tool or engineering approval.

How this works

Record full MPN, pitch, used I/O and candidate via process; produce a review checklist. No layer count or geometry is inferred from pitch.

Inputs and limits

Pitch 0.05–10 mm; used user I/O 0–10,000. These bounds do not state manufacturing capability. Include power, ground and dedicated pins in the engineering review.

Verification example

0.5 mm pitch, 100 used I/O, process undecided → request full ball map, stack-up and via-process review.

Use the example inputs to inspect how the method behaves. This is a reference calculation, not a hardware test.

Data handling & review

Calculations and pasted lists stay in this browser. No account is required. An enquiry brief is stored temporarily in this tab's session only when you choose to transfer it.

Report a method or input issue →

04 / CONTINUE THE TASK

Take the next useful step.

Keep exact device and board revisions with the assumptions you just checked.

Prepare stack-up requirements →Discuss board fabrication →Return to all engineering tools →

Related evidence and next tasks

Continue the task with the relevant source scope. These reading paths do not establish interchangeability or current supply.

Turn editable inputs into a reviewable planning brief
BGA escape review checklist — Turn editable inputs into a reviewable planning brief
Open the animated walkthrough (close to hide motion)Animated workflow: INPUT: Units + assumptions; CALCULATE: Current values; CHECK: Failure / unknown; RECORD: Save + review RFQ

Turn editable inputs into a reviewable planning brief · Browser-local planning arithmetic is not a hardware test or engineering certification.

  1. INPUT: Units + assumptions
  2. CALCULATE: Current values
  3. CHECK: Failure / unknown
  4. RECORD: Save + review RFQ

Original conceptual teaching visual. Not a product photograph, schematic, pinout, footprint or measured result. The static poster is used when reduced motion is requested.