BASE DEVICE
BME280
Combined humidity, barometric pressure and temperature sensor.
- Main supply VDD
- 1.71 to 3.6 V
- Pressure operating range
- 300 to 1100 hPa
- Interfaces
- I2C and SPI
1 ordering code0 273 141 185 →
Specifications & documents →Bosch Sensortec / TECHNICAL REFERENCE
BMI270
IMU integrating acceleration and angular-rate measurement.
FPGA.io Part Number FIO-A4CCB3FABEF964B1Internal catalogue reference · manufacturer MPN remains unchanged
Technical reference · Base device — ordering suffix not specified · Checked 2026-09-28
DOCUMENTED FACTS
Technical parameters
Values apply to the device and conditions identified in each source. Family maxima, package limits and full ordering-code specifications must not be treated as interchangeable.
| Parameter | Documented value | Source & conditions |
|---|---|---|
| Accelerometer / gyro digital resolution | 16 / 16 bit | BMI270 official reference ↗Product specification block |
| Accelerometer full-scale choices | From ±2 to ±16 g | BMI270 official reference ↗Product specification block |
| Gyroscope full-scale choices | From ±125 to ±2000 degrees/s | BMI270 official reference ↗Product specification block |
| Supply VDD | 1.7–3.6 V | BMI270 official reference ↗Product specification block |
| Package | 14-pin LGA, 2.5 × 3.0 × 0.8 mm | BMI270 official reference ↗Product specification block |
Official documents
BMI270 official referenceProduct specification blockWeb ↗Ordering and board constraints
This reference identifies a base device. Package, speed grade, temperature, qualification and packing suffixes have not been inferred.
- Check the exact package, revision and electrical operating conditions.
- Review board layout and driver requirements before design-in.
- Confirm current availability and lifecycle for the complete code before procurement.
- Review pinout, electrical conditions and the exact document revision before PCB release.
Prepare a complete request
Include the full ordering code, quantity, delivery requirement and traceability needs. For an assembled board, include BOM revision, programming and test scope.
Request this device ↗Series & categories
COMPLETE PART IDENTITIES
Ordering numbers for BMI270
These references belong to this device. Evidence labels distinguish reviewed specifications, public listings and manufacturer coding examples. Counts describe this site’s documented coverage, not stock or all configurations offered by the manufacturer.
| Full ordering number | Package | Speed / temperature | Evidence | Next step |
|---|---|---|---|---|
| 0 273 017 008 | Not verified | Not verifiedNot verified | Manufacturer-listed codeView source ↗ | Device details →Request quotation |
1 of 1 codes shown
No ordering codes match. Clear the search to see this device’s documented codes.
Not verified means that parameter has not been independently established for this exact code. A code example is not confirmation that a configuration can be ordered today.
Other devices in this product line
Compare the documented requirements; inclusion in the same series does not establish interchangeability.