Bosch Sensortec / TECHNICAL REFERENCE

BME280

Combined humidity, barometric pressure and temperature sensor.

FPGA.io Part Number FIO-49127DC624B76140Internal catalogue reference · manufacturer MPN remains unchanged

Technical reference · Base device — ordering suffix not specified · Checked 2026-09-28

Request sourcing review ↗View documented parameters ↓

BME280 — technical feature overview — Technical schematicFPGA.io technical schematic for BME280. Values summarize the documented fields below; consult their source conditions. This is an abstract diagram, not a product photograph, package drawing or pinout. Parameter sources below ↓

DOCUMENTED FACTS

Technical parameters

4 source-linked fields

Values apply to the device and conditions identified in each source. Family maxima, package limits and full ordering-code specifications must not be treated as interchangeable.

Parameter	Documented value	Source & conditions
Main supply VDD	1.71 to 3.6 V	BME280 product page ↗Technical data
Pressure operating range	300 to 1100 hPa	BME280 product page ↗Technical data
Interfaces	I2C and SPI	BME280 product page ↗Technical data
Package	8-pin LGA, 2.5 × 2.5 × 0.93 mm	BME280 product page ↗Technical data

Official documents

BME280 product pageTechnical dataWeb ↗

Ordering and board constraints

This reference identifies a base device. Package, speed grade, temperature, qualification and packing suffixes have not been inferred.

Verify the exact package, grade and ordering suffix before design-in.
Confirm current availability and lifecycle for the complete code before procurement.
Review pinout, electrical conditions and the exact document revision before PCB release.

Prepare a complete request

Include the full ordering code, quantity, delivery requirement and traceability needs. For an assembled board, include BOM revision, programming and test scope.

Request this device ↗

Discuss sourcing + PCBA →

Series & categories

MEMS motion and environmental sensors →

COMPLETE PART IDENTITIES

Ordering numbers for BME280

1 documented code

These references belong to this device. Evidence labels distinguish reviewed specifications, public listings and manufacturer coding examples. Counts describe this site’s documented coverage, not stock or all configurations offered by the manufacturer.

Full ordering number	Package	Speed / temperature	Evidence	Next step
0 273 141 185	Not verified	Not verifiedNot verified	Manufacturer-listed codeView source ↗	Device details →Request quotation

1 of 1 codes shown

Not verified means that parameter has not been independently established for this exact code. A code example is not confirmation that a configuration can be ordered today.

Other devices in this product line

Compare the documented requirements; inclusion in the same series does not establish interchangeability.

BASE DEVICE

BMI270

IMU integrating acceleration and angular-rate measurement.

Accelerometer / gyro digital resolution: 16 / 16 bit
Accelerometer full-scale choices: From ±2 to ±16 g
Gyroscope full-scale choices: From ±125 to ±2000 degrees/s

1 ordering code0 273 017 008 →

Specifications & documents →