Confirmed here
The source-listed identity 0 273 141 185 and 0 individually sourced technical fields shown below.
Open identity evidence ↓Bosch Sensortec / TECHNICAL REFERENCE
0 273 141 185
A documented ordering-code reference associated with BME280. Literal numeric Bosch part number including its printed spaces; BST-BME280 document codes and 0330-series evaluation boards are excluded.
FPGA.io Part Number FIO-61B1B015E86AE86CInternal catalogue reference · manufacturer MPN remains unchanged
Technical reference · Documented ordering reference · Checked 2026-09-28
What this ordering reference establishes
Base-device context
Use BME280 resources to understand the silicon. They do not establish the I/O count or electrical limits of every package.
Read base-device parameters →Not yet verified for this ordering code
Any package, speed, temperature, lifecycle or electrical field absent from the sourced table needs confirmation. Stock, price and delivery also require a current quotation.
Request exact-code review →DOCUMENTED FACTS
Ordering identity & evidence
This reference establishes the published ordering identity. Package-specific electrical and timing parameters have not been reviewed here. Use the base-device documentation as context, then verify the exact package and grade.
| Parameter | Documented value | Source & conditions |
|---|---|---|
| Manufacturer part number | 0 273 141 185 | Published identity ↗Datasheet, p.44, Table 36 mass-production marking links BME280 to part number |
Ordering-code evidence
BME280 manufacturer ordering referenceDatasheet, p.44, Table 36 mass-production marking links BME280 to part numberReference ↗Ordering and board constraints
This ordering reference contains the documented facts shown above; it is separate from the fully reviewed FPGA ordering-number catalogue.
- Check the current manufacturer ordering table and exact package pinout.
- Unlisted electrical or timing limits are not inferred from the base-device name.
- Confirm current availability and lifecycle for the complete code before procurement.
- Review pinout, electrical conditions and the exact document revision before PCB release.
Prepare a complete request
Include the full ordering code, quantity, delivery requirement and traceability needs. For an assembled board, include BOM revision, programming and test scope.
Request this device ↗Series & categories
More ordering codes for BME280
1 ordering code0 273 141 185 →
Other devices in this product line
Compare the documented requirements; inclusion in the same series does not establish interchangeability.
BASE DEVICE
BME280
Combined humidity, barometric pressure and temperature sensor.
- Main supply VDD
- 1.71 to 3.6 V
- Pressure operating range
- 300 to 1100 hPa
- Interfaces
- I2C and SPI
1 ordering code0 273 141 185 →
Specifications & documents →BASE DEVICE
BMI270
IMU integrating acceleration and angular-rate measurement.
- Accelerometer / gyro digital resolution
- 16 / 16 bit
- Accelerometer full-scale choices
- From ±2 to ±16 g
- Gyroscope full-scale choices
- From ±125 to ±2000 degrees/s
1 ordering code0 273 017 008 →
Specifications & documents →