BASE DEVICE
CT06
Certus-N2 FPGA device as named in the official selector.
- System logic cells
- 65 K
- Embedded memory
- 4 Mb
- 18 x 18 multipliers
- 120
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →Lattice Semiconductor / Chips & IP
General-purpose FPGAs
Compare density, embedded memory, DSP and serial interfaces without treating vendor logic metrics as interchangeable.
Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.
Product scopeChips & IP
Device references in this category13
Documented ordering codes214
Information checked2026-09-28
FROM FAMILY TO DEVICE
Chip models in General-purpose FPGAs
Reviewed ordering-number examples
These complete codes belong to this category or its documented subseries. Open a part to review package and grade-specific data or add it to comparison.
| Full part number | Family / package | Native logic resource | Block RAM | User I/O | Selection |
|---|---|---|---|---|---|
| LFE5U-12F-6BG256CLattice Semiconductor · Commercial (C) | ECP5BG256 | 12000 LUT4 (nominal) | 576 Kb | 197 | + Compare |
| LFE5U-12F-6BG256ILattice Semiconductor · Industrial (I) | ECP5BG256 | 12000 LUT4 (nominal) | 576 Kb | 197 | + Compare |
| LFE5U-12F-6BG381CLattice Semiconductor · Commercial (C) | ECP5BG381 | 12000 LUT4 (nominal) | 576 Kb | 197 | + Compare |
| LFE5U-12F-6BG381ILattice Semiconductor · Industrial (I) | ECP5BG381 | 12000 LUT4 (nominal) | 576 Kb | 197 | + Compare |
| LFE5U-12F-6MG285CLattice Semiconductor · Commercial (C) | ECP5MG285 | 12000 LUT4 (nominal) | 576 Kb | 118 | + Compare |
| LFE5U-12F-6MG285ILattice Semiconductor · Industrial (I) | ECP5MG285 | 12000 LUT4 (nominal) | 576 Kb | 118 | + Compare |
| LFE5U-12F-6TG144CLattice Semiconductor · Commercial (C) | ECP5TG144 | 12000 LUT4 (nominal) | 576 Kb | 98 | + Compare |
| LFE5U-12F-6TG144ILattice Semiconductor · Industrial (I) | ECP5TG144 | 12000 LUT4 (nominal) | 576 Kb | 98 | + Compare |
| LFE5U-12F-7BG256CLattice Semiconductor · Commercial (C) | ECP5BG256 | 12000 LUT4 (nominal) | 576 Kb | 197 | + Compare |
| LFE5U-12F-7BG256ILattice Semiconductor · Industrial (I) | ECP5BG256 | 12000 LUT4 (nominal) | 576 Kb | 197 | + Compare |
| LFE5U-12F-7BG381CLattice Semiconductor · Commercial (C) | ECP5BG381 | 12000 LUT4 (nominal) | 576 Kb | 197 | + Compare |
| LFE5U-12F-7BG381ILattice Semiconductor · Industrial (I) | ECP5BG381 | 12000 LUT4 (nominal) | 576 Kb | 197 | + Compare |
View all reviewed ECP5 ordering numbers →
View all reviewed ECP5-5G ordering numbers →
Documented device references
Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.
BASE DEVICE
CT20
Certus-N2 FPGA device as named in the official selector.
- System logic cells
- 220 K
- Embedded memory
- 12 Mb
- 18 x 18 multipliers
- 520
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →BASE DEVICE
E30
Avant-E FPGA device as named in the manufacturer's family selector.
- System logic cells
- 262 K
- Embedded memory
- 14.4 Mb
- 18 x 18 multipliers
- 700
2 ordering codesLAV-AT-E30-1ASG410I →LAV-AT-E30-1CBG484C →
Specifications & documents →BASE DEVICE
E70
Avant-E FPGA device as named in the manufacturer's family selector.
- System logic cells
- 637 K
- Embedded memory
- 35.6 Mb
- 18 x 18 multipliers
- 1800
BASE DEVICE
G30
Avant-G FPGA device as named in the manufacturer's family selector.
- System logic cells
- 262 K
- Embedded memory
- 14.4 Mb
- 18 x 18 multipliers
- 700
1 ordering codeLAV-AT-G30-3LFG676I →
Specifications & documents →BASE DEVICE
G70
Avant-G FPGA device as named in the manufacturer's family selector.
- System logic cells
- 637 K
- Embedded memory
- 35.6 Mb
- 18 x 18 multipliers
- 1800
BASE DEVICE
LFCPNX-50
CertusPro-NX FPGA base device with PCIe Gen3 hard IP.
- Logic cells
- 52 K
- Embedded memory (EBR)
- 1728 kb
- 18 x 18 multipliers
- 96
BASE DEVICE
LFCPNX-100
CertusPro-NX FPGA base device with PCIe Gen3 hard IP.
- Logic cells
- 96 K
- Embedded memory (EBR)
- 3744 kb
- 18 x 18 multipliers
- 156
BASE DEVICE
LFD2NX-17
Certus-NX general-purpose FPGA base device.
- Logic cells
- 17 K
- Embedded memory (EBR)
- 432 kb
- 18 x 18 multipliers
- 24
1 ordering codeLFD2NX-17-7BG196I →
Specifications & documents →BASE DEVICE
LFD2NX-40
Certus-NX general-purpose FPGA base device.
- Logic cells
- 39 K
- Embedded memory (EBR)
- 1512 kb
- 18 x 18 multipliers
- 56
BASE DEVICE
LFD2NX-65
Certus-NX general-purpose FPGA base device.
- Logic cells
- 65 K
- Embedded memory (EBR)
- 2304 kb
- 18 x 18 multipliers
- 128
BASE DEVICE
X30
Avant-X FPGA device as named in the manufacturer's family selector.
- System logic cells
- 262 K
- Embedded memory
- 14.4 Mb
- 18 x 18 multipliers
- 700
BASE DEVICE
X70
Avant-X FPGA device as named in the manufacturer's family selector.
- System logic cells
- 637 K
- Embedded memory
- 35.6 Mb
- 18 x 18 multipliers
- 1800
13 device references
No model matches this search. Clear the filter or send the exact part number for review.
Browse the full Lattice Semiconductor product map →
WITHIN THIS PRODUCT LINE
Series & subcategories
Avant
A mid-range FPGA platform with differentiated edge-compute, general-purpose and high-speed-connectivity families.
6 device refs · 22 ordering codesAvant-E 2 device refs · 7 ordering codesAvant-G 2 device refs · 5 ordering codesAvant-X 2 device refs · 10 ordering codes
Explore Avant →Certus
General-purpose FPGA families spanning compact I/O-rich designs and higher-bandwidth embedded systems.
7 device refs · 18 ordering codesCertus-N2 2 device refs · 0 ordering codesCertusPro-NX 2 device refs · 9 ordering codesCertus-NX 3 device refs · 9 ordering codes
Explore Certus →ECP5
Established LUT4 FPGA family for connectivity and signal processing. LFE5U and LFE5UM variants differ in serial-interface resources.
0 device refs · 156 ordering codesExplore ECP5 →ECP5-5G
The ECP5-5G branch adds higher-speed serial connectivity within the ECP5 architecture.
0 device refs · 18 ordering codesExplore ECP5-5G →SELECTION CONTEXT
Working with General-purpose FPGAs
Define the required function
Compare density, embedded memory, DSP and serial interfaces without treating vendor logic metrics as interchangeable.
Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.
Check the integration boundary
Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.
Open the manufacturer reference ↗ENGINEERING DECISIONS
What to confirm before selection
Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.
- Use the vendor-native logic, memory and DSP definitions; unlike resource units are not directly equivalent.
- Confirm package pinout, I/O bank voltages, configuration method and the supported tool release before layout.
- Review power sequencing, decoupling, BGA escape routing and programming access with the complete ordering number.
Move from family to full ordering number
Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.
Browse reviewed FPGA device data →Preparing a complete board?
Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.
PCBA project preparation →EVIDENCE & DEVELOPMENT
Documents for this product line
Start with the device table, then check electrical limits, ordering information and the applicable tool release.
General-purpose FPGAs — manufacturer referenceManufacturer product documentationPrimary source ↗Lattice Certus-N2Certus-N2 Device Selection GuideWeb ↗Lattice Avant-EAvant-AT-E Family Selection GuideWeb ↗Lattice Avant-GAvant-AT-G Family Selection GuideWeb ↗Lattice Certus-NXCertus-NX Device Selection GuideWeb ↗Lattice Avant-XAvant-AT-X Family Selection GuideWeb ↗
More Lattice Semiconductor development resources
Lattice product portfolio ↗
Official family entry points and product-selector access.
Lattice kits and boards ↗
Search official development platforms and supporting design files.
Mature and discontinued devices ↗
Review maturity, discontinuance notices and suggested newer families.
Lattice Radiant ↗
Software downloads, release notes and device-support documentation.
These broader manufacturer resources do not establish support or compatibility for every device on this page.
PRACTICAL QUESTIONS
General-purpose FPGAs selection questions
How do I select a model within General-purpose FPGAs?
Start with the documented product scope: Compare density, embedded memory, DSP and serial interfaces without treating vendor logic metrics as interchangeable. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.
Is a base-device name enough to place an order?
A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.
Can the listed devices use the same PCB or development tools?
A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.
What should I include for sourcing or PCBA review?
Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.
PREPARE A USEFUL INQUIRY
Build your selection brief.
Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.
Open quotation form →Sources & portfolio context
Lattice Semiconductor General-purpose FPGAs reference ↗
Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.
← Complete Lattice Semiconductor product mapRelated entries in this category
Vision and low-power FPGAs 10 device refs · 23 ordering codes →Control and security FPGAs 13 device refs · 12 ordering codes →Earlier-generation FPGA families 2 device refs · 6 ordering codes →Development kits 4 portfolio entries →Design software 5 portfolio entries →FPGA IP 0 device refs · 0 ordering codes →