Lifecycle & ordering review: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation. Evidence and conditions ↓
Core fields reviewed 2026-11-14 Source links and conditions accompany each parameter.
Technical schematic190 × 2 = 380 capacity blocks. 545 - 380 = 165 before mapping. Original educational schematic; assumptions are not test results. Not a pinout or footprint. Technical references ↗
FPGA.io Part NumberFIO-5704E8AE2981C724Internal catalogue reference · manufacturer MPN remains unchanged
XC7Z045-2FBG676E is a system-on-chip combining an Arm processing system and FPGA programmable logic in the AMD / Xilinx Zynq-7000 SoC family, supplied in the FBG676 package. Its reviewed resources include 350,000 logic cells, 19,620 Kb of block RAM, 250 I/O for this device/package combination. This ordering code specifies speed grade -2 and Extended (E) temperature grade. The selected device/package has 8 GTX channels; check this package-level limit before planning serial interfaces. The user-I/O figure here refers to PL SelectIO only. The 128 PS I/O in UG865 are a separate functional allocation, not interchangeable general-purpose PL pins. Use the linked manufacturer data sheets for electrical limits, pin assignments and timing. FPGA.io can review the complete part number for chip sourcing or a combined sourcing and PCBA project.
Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.
Temperature grade
Extended (E)
MPNDS190Z035 ↗p23 Table7 XC7Z045 group and Figure4; exact letter in XCN20011 p4
Core voltage conditions
0.97 to 1.03 V
gradeDS191Z035 ↗p3 Table2 VCCINT for -3/-2/-1Conditions
PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.
Maximum application clock
Not confirmed
designConditions
Design-specific timing not established.
Application power
Not confirmed
designConditions
Workload, implementation and thermal analysis required.
Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.
Available stock
Not confirmed
supplyConditions
Current inventory, USD price and lead time are not verified. Request a quotation for the full ordering code.
MANUFACTURER REFERENCES
Official documents & PDF datasheets
Use the electrical data sheet together with the device overview and package/pinout information.
Full ordering-number evidence: XCN20011 v1.0 p4 Table6 literal XC7Z045-2FBG676E in Replacement Part column..
Manufacturer documents may be revised. Verify the current revision and applicable device/package/grade before releasing a design.
DEVICE & PACKAGE DECISION
Split memory banks before combining their capacity
Assume 190 independent buffers each require 72 Kb. Capacity alone needs two 36 Kb blocks per buffer, or 380 of the XC7Z045’s 545 blocks. The 165-block difference is a nominal count, not permission for arbitrary port or width configurations.
Engineering screening guidance using reviewed catalogue evidence. Examples are hypothetical and advisory; validate your actual design and the exact ordering code.
Work the decision before changing the purchase line
Assume 190 independent buffers each require 72 Kb. Capacity alone needs two 36 Kb blocks per buffer, or 380 of the XC7Z045’s 545 blocks. The 165-block difference is a nominal count, not permission for arbitrary port or width configurations. These numbers are an explicitly hypothetical planning case, except for the cited device limits and package facts. Replace the assumptions with your signal matrix, implemented resource report or controlled operating requirement. Keep the reason for any rejected candidate and the evidence needed to reopen it. A count or arithmetic pass is an early screening result; it does not establish routing, application timing, thermal behavior or suitability of a supplied lot.
Carry the full ordering code and source scope into review
XC7Z045-2FBG676E appears in the replacement column of XCN20011 v1.0, 2020-09-28, Table6. That historical listing does not place this G code in the affected V-code group and does not establish present lifecycle or stock. Compare XC7Z045-2FFG676E using the linked record, then review exact package, ball map, grade, power rails and controlled implementation files. DS190 v1.11.1 supplies the PL resource counts; DS191 v1.18.1 supplies the grade-specific operating conditions; UG865 v1.9 supplies the package mapping. Historical revisions are identified so the engineer can check the revision applicable to the final design. Request quantity, traceability and acceptance evidence for the offered full code; current price, availability and delivery remain subject to quotation.
Result: 22 I/O remain in the count-only budget (91.2% allocated).
Planning diagram: assumed I/O allocation 228 I/O assumed allocation / 250 documented package I/O; 22 I/O unallocated. Count-only planning diagram, not a pinout or bank assignment.
91.2% of the sourced package count allocated; 22 I/O unallocated.
Each signal consumes one single-ended user I/O in this example. Dedicated serial lanes are separate. Bank voltage, differential pairing, clocks, configuration use and actual pin allocation can reduce usable capacity. Reserved signals here are an assumed design allowance, not manufacturer-reserved pins.
Result: Allocate at least 14,008,320 payload bits before adding memory overhead. The current reviewed embedded-memory reference is 19,620 Kb.
Payload arithmetic only. The source Kb/kb unit is retained; this example does not choose a decimal/binary conversion or claim a percentage fit. Round each buffer to the native memory-block geometry and check port width, depth, ECC/parity, dual-port use and implementation reports.
Public device and ordering comparisons
Compare exact package and grade conditions below. These are screening references; matching names, dimensions or resource counts do not establish pin compatibility or replacement approval.
XC7Z045-2FBG676E and already-public screening candidates
Native LUT4, LE and logic-cell metrics remain separate. Temperature is not converted to ambient; source notes define the operating basis. A family maximum is never substituted for package I/O or channels. No clock, power or stock figure is inferred.
Sources and conditions: XC7Z045-2FBG676E
Lifecycle / ordering: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.
Package: FBG676.XCN20011 — Selected Package Product Discontinuation Notice · revision 1.0 · XCN20011 v1.0 p4 Table6 literal XC7Z045-2FBG676E in Replacement Part column. · scope: MPN. Historical replacement code, not the affected V package code.
Speed grade: -2.XCN20011 — Selected Package Product Discontinuation Notice · revision 1.0 · XCN20011 v1.0 p4 Table6 literal XC7Z045-2FBG676E in Replacement Part column. · scope: MPN. DS190 p23 Table7 cross-checks permitted grade combinations. Not a single application clock rating.
Embedded block memory: 19,620 Kb.DS190 — Zynq-7000 SoC Data Sheet: Overview · revision 1.11.1 · DS190 p3 Table1 XC7Z045: 545 blocks × 36 Kb · scope: derived. Derived 19620 Kb; not bytes or a guaranteed mapped configuration.
Core rail reference: 0.97 to 1.03 V.DS191 — Zynq-7000 SoC DC and AC Switching Characteristics (Z-7030/35/45/100) · revision 1.18.1 · p3 Table2 VCCINT for -3/-2/-1 · scope: grade. PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.
Sources and conditions: XC7Z045-2FFG676E
Package: FBG676 → FFG676. Verify the applicable limits and design impact.
Lifecycle / ordering: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.
Body dimensions: 27 × 27 mm.UG865 — Zynq-7000 SoC Packaging and Pinout Product Specification · revision 1.9 · p88 Figure4-12 (XC7Z035/XC7Z045 FFG676), D and E · scope: package. Package body only, excluding PCB courtyard. For FFG900, cited lid variants share this body size; no lid variant is inferred for a supplied lot.
Core rail reference: 0.97 to 1.03 V.DS191 — Zynq-7000 SoC DC and AC Switching Characteristics (Z-7030/35/45/100) · revision 1.18.1 · p3 Table2 VCCINT for -3/-2/-1 · scope: grade. PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.
Exact identity evidence:XCN20011 — Selected Package Product Discontinuation Notice · XCN20011 v1.0 p4 Table6 literal XC7Z045-2FBG676E in Replacement Part column. · Historical replacement recommendation only; not an affected-device EOL assertion, current availability or compatibility approval.
Practical questions for this selection
What should replace the planning estimate?
A report of the actual RAM primitives, port modes, clocks and latency after implementation. Keep parity or ECC assumptions explicit.
What does the numerical example establish for XC7Z045-2FBG676E?
It establishes arithmetic under the explicitly hypothetical inputs shown here. It is not a tool result, synthesis report, timing closure, pin-assignment validation or application qualification. Replace the assumptions with your signal list and memory geometry, then validate in the vendor tools.
For software-heavy control with limited parallel I/O, assess an MCU or processor against the same latency, interface and power requirements. For wide parallel datapaths or custom timing, compare FPGA architectures using a mapped design. For early prototyping, an evaluation board may reduce initial hardware work; verify its exact device, accessible interfaces and production suitability.
Choose what may change before comparing resources. The default keeps the same manufacturer and family, so Zynq processing-system designs are not silently matched to pure FPGAs. Same-family results still require CPU, software, pinout and timing review.
14 full MPNs meet the selected scope and numeric constraints. Showing 1 device representatives, at most two per manufacturer, ordered by smallest excess resources. Temperature, timing and pinout still require review.
Temperature grade: Extended (E) → Commercial (C). Verify the applicable limits and design impact.
Speed grade: -2 → -1. Verify the applicable limits and design impact.
Numeric matches do not establish pin compatibility, protocol support, lifecycle or supply availability.
Numeric screening is not replacement approval.
Logic and DSP mapping, pinout, bank voltages, temperature, timing, protocol support and toolchain remain engineering checks. Serial channel quantity does not verify data rate or protocol support. Cross-brand candidates generally require board and HDL review.
Closest documented device and package variants appear first. Package, grade and pinout may differ; these are comparison candidates, not approved replacements.