FPGA DEVICES · ENGINEERING · SOURCING Source-linked information. Clear project requirements.

SIDE-BY-SIDE REVIEW

Compare FPGA devices

Review resource differences, package constraints and the fields that still need confirmation.

Select devices (2–4)
Reviewed full part numbers

Showing up to 40 search results plus your selected devices. Search the full catalogue above to find another MPN.

Quote these devices ↗
Parameter / statusXC7Z045-2FBG676EZynq-7000 SoCXC7Z045-1FBG676IZynq-7000 SoC
Logic cellsSame350000 logic cellsDS190Z035 ↗ · devicep3 Table1 XC7Z045 Logic Cells row
Conditions

Rounded vendor figure 350K; not a LUT count.

350000 logic cellsDS190Z035 ↗ · devicep3 Table1 XC7Z045 Logic Cells row
Conditions

Rounded vendor figure 350K; not a LUT count.

6-input LUTsSame218600 LUT6DS190Z035 ↗ · devicep3 Table1 XC7Z045 Look-Up Tables row218600 LUT6DS190Z035 ↗ · devicep3 Table1 XC7Z045 Look-Up Tables row
Block RAM capacitySame19620 KbDS190Z035 ↗ · derivedDS190 p3 Table1 XC7Z045: 545 blocks × 36 Kb
Conditions

Derived 19620 Kb; not bytes or a guaranteed mapped configuration.

19620 KbDS190Z035 ↗ · derivedDS190 p3 Table1 XC7Z045: 545 blocks × 36 Kb
Conditions

Derived 19620 Kb; not bytes or a guaranteed mapped configuration.

36 Kb block RAM blocksSame545 blocksDS190Z035 ↗ · devicep3 Table1 XC7Z045 Block RAM row
Conditions

Each source block is 36 Kb.

545 blocksDS190Z035 ↗ · devicep3 Table1 XC7Z045 Block RAM row
Conditions

Each source block is 36 Kb.

DSP slicesSame900 DSP48E1DS190Z035 ↗ · devicep3 Table1 XC7Z045 DSP Slices row; DS191 p58 Table70 DSP48E1 architecture cross-check
Conditions

900 DSP slices; count is not throughput.

900 DSP48E1DS190Z035 ↗ · devicep3 Table1 XC7Z045 DSP Slices row; DS191 p58 Table70 DSP48E1 architecture cross-check
Conditions

900 DSP slices; count is not throughput.

User I/O in this packageSame250 I/OUG865Z035 ↗ · device-packagep11 Table1-4 XC7Z045 / FBG676
Conditions

PL SelectIO: 100 HR + 150 HP. Separate 128 PS I/O. Differential pairs are alternate uses, not additional pins.

250 I/OUG865Z035 ↗ · device-packagep11 Table1-4 XC7Z045 / FBG676
Conditions

PL SelectIO: 100 HR + 150 HP. Separate 128 PS I/O. Differential pairs are alternate uses, not additional pins.

Serial transceivers in this packageSame8 GTX channelsUG865Z035 ↗ · device-packagep10 Table1-3 XC7Z045 / FBG676
Conditions

8 exposed GTX channels for this device/package; protocol qualification is separate.

8 GTX channelsUG865Z035 ↗ · device-packagep10 Table1-3 XC7Z045 / FBG676
Conditions

8 exposed GTX channels for this device/package; protocol qualification is separate.

Package codeSameFBG676XCN20011Z035 ↗ · MPNXCN20011 v1.0 p4 Table6 literal XC7Z045-2FBG676E in Replacement Part column.
Conditions

Historical replacement code, not the affected V package code.

FBG676XCN20011Z035 ↗ · MPNXCN20011 v1.0 p4 Table6 literal XC7Z045-1FBG676I in Replacement Part column.
Conditions

Historical replacement code, not the affected V package code.

Package ball countSame676 ballsPINS-XC7Z045-FBG676 ↗ · packageHeader xc7z045fbg676; 676 distinct pin rows counted
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

676 ballsPINS-XC7Z045-FBG676 ↗ · packageHeader xc7z045fbg676; 676 distinct pin rows counted
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

Package bodySame27 × 27 mmUG865Z035 ↗ · packageUG865 v1.9 p9 Table1-1 FBG676 package group
Conditions

Nominal package body only. Exact outline, height, thermal interface and PCB courtyard require separate review.

27 × 27 mmUG865Z035 ↗ · packageUG865 v1.9 p9 Table1-1 FBG676 package group
Conditions

Nominal package body only. Exact outline, height, thermal interface and PCB courtyard require separate review.

Ball pitchSame1 mmUG865Z035 ↗ · packageUG865 v1.9 p9 Table1-1 FBG676
Conditions

Nominal ball pitch. A body drawing is not a fabrication-ready land pattern.

1 mmUG865Z035 ↗ · packageUG865 v1.9 p9 Table1-1 FBG676
Conditions

Nominal ball pitch. A body drawing is not a fabrication-ready land pattern.

Package terminals / leads (vendor count)Same676 pinsPINS-XC7Z045-FBG676 ↗ · packageHeader xc7z045fbg676; 676 distinct pin rows counted
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

676 pinsPINS-XC7Z045-FBG676 ↗ · packageHeader xc7z045fbg676; 676 distinct pin rows counted
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

Speed gradeDifferent-2XCN20011Z035 ↗ · MPNXCN20011 v1.0 p4 Table6 literal XC7Z045-2FBG676E in Replacement Part column.
Conditions

DS190 p23 Table7 cross-checks permitted grade combinations. Not a single application clock rating.

-1XCN20011Z035 ↗ · MPNXCN20011 v1.0 p4 Table6 literal XC7Z045-1FBG676I in Replacement Part column.
Conditions

DS190 p23 Table7 cross-checks permitted grade combinations. Not a single application clock rating.

Junction temperature (Tj)Different0 to +100 °CDS191Z035 ↗ · gradep4 Table2 Tj E row
Conditions

Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.

−40 to +100 °CDS191Z035 ↗ · gradep4 Table2 Tj I row
Conditions

Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.

Temperature gradeDifferentExtended (E)DS190Z035 ↗ · MPNp23 Table7 XC7Z045 group and Figure4; exact letter in XCN20011 p4Industrial (I)DS190Z035 ↗ · MPNp23 Table7 XC7Z045 group and Figure4; exact letter in XCN20011 p4
Core voltage conditionsSame0.97 to 1.03 VDS191Z035 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.

0.97 to 1.03 VDS191Z035 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.

Maximum application clockUnconfirmed dataNot confirmed
Conditions

Design-specific timing not established.

Not confirmed
Conditions

Design-specific timing not established.

Application powerUnconfirmed dataNot confirmed
Conditions

Workload, implementation and thermal analysis required.

Not confirmed
Conditions

Workload, implementation and thermal analysis required.

Minimum junction temperatureDifferent0 °CDS191Z035 ↗ · gradep4 Table2 Tj E row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

-40 °CDS191Z035 ↗ · gradep4 Table2 Tj I row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

Maximum junction temperatureSame100 °CDS191Z035 ↗ · gradep4 Table2 Tj E row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

100 °CDS191Z035 ↗ · gradep4 Table2 Tj I row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

Temperature referenceSameJunction temperature (Tj)DS191Z035 ↗ · gradep4 Table2 Tj rowsJunction temperature (Tj)DS191Z035 ↗ · gradep4 Table2 Tj rows
Conditional temperature operationSameRecommended operating Tj rangeDS191Z035 ↗ · gradep4 Table2 Tj E row
Conditions

DS191 Table2 and applicable notes. No extended or over-temperature qualification is asserted.

Recommended operating Tj rangeDS191Z035 ↗ · gradep4 Table2 Tj I row
Conditions

DS191 Table2 and applicable notes. No extended or over-temperature qualification is asserted.

Minimum core voltageSame0.97 VDS191Z035 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

0.97 VDS191Z035 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Nominal core voltageSame1 VDS191Z035 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

1 VDS191Z035 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Maximum core voltageSame1.03 VDS191Z035 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

1.03 VDS191Z035 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Current lifecycleUnconfirmed dataNot confirmedXCN20011Z035 ↗ · supplyp4 Table6 replacement-part columns
Conditions

Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Not confirmedXCN20011Z035 ↗ · supplyp4 Table6 replacement-part columns
Conditions

Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Available stockUnconfirmed dataNot confirmed
Conditions

Current inventory, USD price and lead time are not verified. Request a quotation for the full ordering code.

Not confirmed
Conditions

Current inventory, USD price and lead time are not verified. Request a quotation for the full ordering code.

Comparison is not replacement approval.

Check pinout, bank voltages, configuration, tool support, timing, thermal design and lifecycle before changing a part. Different vendors’ logic and DSP counts need architecture-specific interpretation.

Keep the differences with your decision

Export the selected public MPNs and key evidence states. This is a planning snapshot, not engineering approval; the full source conditions remain on each device page.