Lifecycle & ordering review: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation. Evidence and conditions ↓
Core fields reviewed 2026-11-14 Source links and conditions accompany each parameter.
Technical schematicPL VCCINT: 0.97-1.03 V. PS VCCPINT: separate row and note 3. Original educational schematic; assumptions are not test results. Not a pinout or footprint. Technical references ↗
FPGA.io Part NumberFIO-932A052E77E9FFB7Internal catalogue reference · manufacturer MPN remains unchanged
XC7Z035-2FBG676I is a system-on-chip combining an Arm processing system and FPGA programmable logic in the AMD / Xilinx Zynq-7000 SoC family, supplied in the FBG676 package. Its reviewed resources include 275,000 logic cells, 18,000 Kb of block RAM, 250 I/O for this device/package combination. This ordering code specifies speed grade -2 and Industrial (I) temperature grade. The selected device/package has 8 GTX channels; check this package-level limit before planning serial interfaces. The user-I/O figure here refers to PL SelectIO only. The 128 PS I/O in UG865 are a separate functional allocation, not interchangeable general-purpose PL pins. Use the linked manufacturer data sheets for electrical limits, pin assignments and timing. FPGA.io can review the complete part number for chip sourcing or a combined sourcing and PCBA project.
Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.
Temperature grade
Industrial (I)
MPNDS190Z035 ↗p23 Table7 XC7Z035 group and Figure4; exact letter in XCN20011 p4
Core voltage conditions
0.97 to 1.03 V
gradeDS191Z035 ↗p3 Table2 VCCINT for -3/-2/-1Conditions
PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.
Maximum application clock
Not confirmed
designConditions
Design-specific timing not established.
Application power
Not confirmed
designConditions
Workload, implementation and thermal analysis required.
Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.
Available stock
Not confirmed
supplyConditions
Current inventory, USD price and lead time are not verified. Request a quotation for the full ordering code.
MANUFACTURER REFERENCES
Official documents & PDF datasheets
Use the electrical data sheet together with the device overview and package/pinout information.
Full ordering-number evidence: XCN20011 v1.0 p4 Table6 literal XC7Z035-2FBG676I in Replacement Part column..
Manufacturer documents may be revised. Verify the current revision and applicable device/package/grade before releasing a design.
DEVICE & PACKAGE DECISION
Audit PS and PL supply names before comparing a regulator
DS191 gives 0.97-1.03 V for the normal PL core rail. The PS core row has its own interval and note 3 tightens it under specified CPU or DDR conditions. Copying one voltage window to every rail loses the conditions that matter.
Engineering screening guidance using reviewed catalogue evidence. Examples are hypothetical and advisory; validate your actual design and the exact ordering code.
Work the decision before changing the purchase line
DS191 gives 0.97-1.03 V for the normal PL core rail. The PS core row has its own interval and note 3 tightens it under specified CPU or DDR conditions. Copying one voltage window to every rail loses the conditions that matter. These numbers are an explicitly hypothetical planning case, except for the cited device limits and package facts. Replace the assumptions with your signal matrix, implemented resource report or controlled operating requirement. Keep the reason for any rejected candidate and the evidence needed to reopen it. A count or arithmetic pass is an early screening result; it does not establish routing, application timing, thermal behavior or suitability of a supplied lot.
Carry the full ordering code and source scope into review
XC7Z035-2FBG676I appears in the replacement column of XCN20011 v1.0, 2020-09-28, Table6. That historical listing does not place this G code in the affected V-code group and does not establish present lifecycle or stock. Compare XC7Z035-2FFG676I using the linked record, then review exact package, ball map, grade, power rails and controlled implementation files. DS190 v1.11.1 supplies the PL resource counts; DS191 v1.18.1 supplies the grade-specific operating conditions; UG865 v1.9 supplies the package mapping. Historical revisions are identified so the engineer can check the revision applicable to the final design. Request quantity, traceability and acceptance evidence for the offered full code; current price, availability and delivery remain subject to quotation.
Result: 18 I/O remain in the count-only budget (92.8% allocated).
Planning diagram: assumed I/O allocation 232 I/O assumed allocation / 250 documented package I/O; 18 I/O unallocated. Count-only planning diagram, not a pinout or bank assignment.
92.8% of the sourced package count allocated; 18 I/O unallocated.
Each signal consumes one single-ended user I/O in this example. Dedicated serial lanes are separate. Bank voltage, differential pairing, clocks, configuration use and actual pin allocation can reduce usable capacity. Reserved signals here are an assumed design allowance, not manufacturer-reserved pins.
Result: Allocate at least 1,048,576 payload bits before adding memory overhead. The current reviewed embedded-memory reference is 18,000 Kb.
Payload arithmetic only. The source Kb/kb unit is retained; this example does not choose a decimal/binary conversion or claim a percentage fit. Round each buffer to the native memory-block geometry and check port width, depth, ECC/parity, dual-port use and implementation reports.
Public device and ordering comparisons
Compare exact package and grade conditions below. These are screening references; matching names, dimensions or resource counts do not establish pin compatibility or replacement approval.
XC7Z035-2FBG676I and already-public screening candidates
Native LUT4, LE and logic-cell metrics remain separate. Temperature is not converted to ambient; source notes define the operating basis. A family maximum is never substituted for package I/O or channels. No clock, power or stock figure is inferred.
Sources and conditions: XC7Z035-2FBG676I
Lifecycle / ordering: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.
Package: FBG676.XCN20011 — Selected Package Product Discontinuation Notice · revision 1.0 · XCN20011 v1.0 p4 Table6 literal XC7Z035-2FBG676I in Replacement Part column. · scope: MPN. Historical replacement code, not the affected V package code.
Speed grade: -2.XCN20011 — Selected Package Product Discontinuation Notice · revision 1.0 · XCN20011 v1.0 p4 Table6 literal XC7Z035-2FBG676I in Replacement Part column. · scope: MPN. DS190 p23 Table7 cross-checks permitted grade combinations. Not a single application clock rating.
Operating temperature (see basis/conditions): −40 to +100 °C.DS191 — Zynq-7000 SoC DC and AC Switching Characteristics (Z-7030/35/45/100) · revision 1.18.1 · p4 Table2 Tj I row · scope: grade. Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.
Embedded block memory: 18,000 Kb.DS190 — Zynq-7000 SoC Data Sheet: Overview · revision 1.11.1 · DS190 p3 Table1 XC7Z035: 500 blocks × 36 Kb · scope: derived. Derived 18000 Kb; not bytes or a guaranteed mapped configuration.
Core rail reference: 0.97 to 1.03 V.DS191 — Zynq-7000 SoC DC and AC Switching Characteristics (Z-7030/35/45/100) · revision 1.18.1 · p3 Table2 VCCINT for -3/-2/-1 · scope: grade. PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.
Sources and conditions: XC7Z035-2FFG676I
Package: FBG676 → FFG676. Verify the applicable limits and design impact.
Lifecycle / ordering: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.
Package: FFG676.XCN20011 — Selected Package Product Discontinuation Notice · revision 1.0 · p4 Table6 Replacement Part column; right block, literal XC7Z035-2FFG676I. Original PDF table visually inspected. · scope: MPN. Historical replacement code, not the affected V package code.
Operating temperature (see basis/conditions): −40 to +100 °C.DS191 — Zynq-7000 SoC DC and AC Switching Characteristics (Z-7030/35/45/100) · revision 1.18.1 · p4 Table2 Tj I row · scope: grade. Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.
Body dimensions: 27 × 27 mm.UG865 — Zynq-7000 SoC Packaging and Pinout Product Specification · revision 1.9 · p88 Figure4-12 (XC7Z035/XC7Z045 FFG676), D and E · scope: package. Package body only, excluding PCB courtyard. For FFG900, cited lid variants share this body size; no lid variant is inferred for a supplied lot.
Core rail reference: 0.97 to 1.03 V.DS191 — Zynq-7000 SoC DC and AC Switching Characteristics (Z-7030/35/45/100) · revision 1.18.1 · p3 Table2 VCCINT for -3/-2/-1 · scope: grade. PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.
Exact identity evidence:XCN20011 — Selected Package Product Discontinuation Notice · XCN20011 v1.0 p4 Table6 literal XC7Z035-2FBG676I in Replacement Part column. · Historical replacement recommendation only; not an affected-device EOL assertion, current availability or compatibility approval.
Practical questions for this selection
Should BRAM power be treated as an unrelated setpoint?
DS191 note 6 requires VCCINT and VCCBRAM to connect to the same supply. Apply the full power-distribution requirements and startup conditions to the actual board.
What does the numerical example establish for XC7Z035-2FBG676I?
It establishes arithmetic under the explicitly hypothetical inputs shown here. It is not a tool result, synthesis report, timing closure, pin-assignment validation or application qualification. Replace the assumptions with your signal list and memory geometry, then validate in the vendor tools.
For software-heavy control with limited parallel I/O, assess an MCU or processor against the same latency, interface and power requirements. For wide parallel datapaths or custom timing, compare FPGA architectures using a mapped design. For early prototyping, an evaluation board may reduce initial hardware work; verify its exact device, accessible interfaces and production suitability.
Choose what may change before comparing resources. The default keeps the same manufacturer and family, so Zynq processing-system designs are not silently matched to pure FPGAs. Same-family results still require CPU, software, pinout and timing review.
29 full MPNs meet the selected scope and numeric constraints. Showing 2 device representatives, at most two per manufacturer, ordered by smallest excess resources. Temperature, timing and pinout still require review.
Temperature grade: Industrial (I) → Commercial (C). Verify the applicable limits and design impact.
Speed grade: -2 → -1. Verify the applicable limits and design impact.
Numeric matches do not establish pin compatibility, protocol support, lifecycle or supply availability.
Numeric screening is not replacement approval.
Logic and DSP mapping, pinout, bank voltages, temperature, timing, protocol support and toolchain remain engineering checks. Serial channel quantity does not verify data rate or protocol support. Cross-brand candidates generally require board and HDL review.
Closest documented device and package variants appear first. Package, grade and pinout may differ; these are comparison candidates, not approved replacements.