Identify the exact module
Record the complete part identifier and revision. Obtain the applicable dimensions, terminal or connector definitions and mounting information.
StarPower / 斯达半导体 / Modules & cards
power modules
power modules is a product-line reference within StarPower / 斯达半导体. Use the manufacturer source to confirm the exact device or deliverable and its current support status.
Integrated hardware: check the exact module revision, carrier or host interface, power, cooling and software requirements.
This category map is being expanded. Linked device examples have individual sources; they do not represent the complete manufacturer catalogue.
EVALUATION & INTEGRATION
Module identity & integration
Check electrical and thermal limits
Compare supply, insulation, signal and load requirements with the documented ratings. Confirm cooling, mounting and interface requirements for the actual module type.
Define the integration evidence
Record the host or circuit conditions and acceptance criteria. Where software or a carrier is involved, identify the required versions and documented interfaces.
Open the applicable documents ↓ · Prepare an engineering question →
This is a review workflow, not a claim that FPGA.io has tested this release or board. Record your exact revision and acceptance result.
FROM FAMILY TO DEVICE
Device relationships for power modules
Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN. This page describes Modules & cards. Chip relationships are shown only when explicitly documented; a same-brand reference does not establish tool support or board compatibility.
Documented device references
Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.
PACKAGED SEMICONDUCTOR POWER MODULE
GD75HFY120C1S
Packaged half-bridge IGBT power module; not a bare chip.
- Voltage class
- 1200 V
- Current class
- 75 A
- Topology
- Half bridge
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →1 device reference
No model matches this search. Clear the filter or send the exact part number for review.
Browse the full StarPower / 斯达半导体 product map →
WITHIN THIS PRODUCT LINE
Series & subcategories
IGBT Modules
IGBT Modules are StarPower packaged power modules, distinct from discrete IGBT or SiC devices.
1 portfolio entryExplore IGBT Modules →SiC Modules
SiC Modules are StarPower packaged power modules, distinct from discrete IGBT or SiC devices.
1 portfolio entryExplore SiC Modules →IPM Modules
IPM Modules are StarPower packaged power modules, distinct from discrete IGBT or SiC devices.
1 portfolio entryExplore IPM Modules →Diode Modules
Diode Modules are StarPower packaged power modules, distinct from discrete IGBT or SiC devices.
1 portfolio entryExplore Diode Modules →ENGINEERING DECISIONS
What to confirm before selection
Record the exact revision and resolve these requirements against its documentation.
- Size voltage, current, transient response, switching frequency and thermal margin for the complete power stage.
- Review package losses, gate-drive needs, protection behavior and recommended layout; similar ratings do not establish equivalence.
- Check the core, flash/RAM, peripherals, pin multiplexing and safety/security requirements together.
- Confirm debugger, IDE/compiler version, bootloader and in-circuit programming access for production.
EVIDENCE & DEVELOPMENT
Documents for this product line
Start with the exact product or release documentation, then check the supported devices, interfaces, licences and revision requirements.
power modules — manufacturer referenceManufacturer product documentationPrimary source ↗GD75HFY120C1S product pageTechnical specificationsWeb ↗
More StarPower / 斯达半导体 development resources
Official product portfolio ↗
Manufacturer or identified public portfolio reference.
These broader manufacturer resources do not establish support or compatibility for every device on this page.
PRACTICAL QUESTIONS
power modules selection questions
Which product or release should I specify?
Use the exact product name and revision, together with the target device and intended workflow. power modules is a product-line reference within StarPower / 斯达半导体. Use the manufacturer source to confirm the exact device or deliverable and its current support status.
How do I check device support?
Use the manufacturer support matrix, release notes or board documentation for the exact revision. Record the exact target device and version; a shared manufacturer alone does not prove compatibility.
What should be checked before integration?
Confirm the board or module revision, fitted device, carrier interface, supply, cooling, connectors, accessories and reference software.
What should I include in a project request?
Describe the application, exact product or revision, target hardware, quantities and delivery requirements. State which components, board manufacturing, programming and test work you need reviewed.
PREPARE A USEFUL INQUIRY
Build your selection brief.
Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.
Open quotation form →Sources & portfolio context
StarPower / 斯达半导体 power modules reference ↗
Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.
← Complete StarPower / 斯达半导体 product map