BASE DEVICE
PG2K100
Kosmo-2 SoPC base device with dual Cortex-A53 processors.
- Logic elements
- 85760 LE
- LUTs
- 53600 LUT
- Block RAM
- 5 Mbit
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →PangoMicro / 紫光同创 / Chips & IP
Product lines
Representative product lines from the linked manufacturer reference.
Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.
Product scopeChips & IP
Device references in this category8
Documented ordering codes0
Information checked2026-09-28
This category map is being expanded. Linked device examples have individual sources; they do not represent the complete manufacturer catalogue.
FROM FAMILY TO DEVICE
Chip models in Product lines
Documented device references
Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.
BASE DEVICE
PG2K400
Kosmo-2 SoPC base device with dual Cortex-A53 processors.
- Logic elements
- 349440 LE
- LUTs
- 218400 LUT
- Block RAM
- 19 Mbit
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →BASE DEVICE
PG2T70H
Titan-2 FPGA base device.
- Logic elements
- 68160 LE
- Block RAM
- 4860 Kbit
- 25x18 APM blocks
- 240 blocks
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →BASE DEVICE
PG2T390H
Titan-2 FPGA base device.
- Logic elements
- 389760 LE
- Block RAM
- 17280 Kbit
- 25x18 APM blocks
- 840 blocks
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →BASE DEVICE
PGC1K
Compa CPLD base device.
- LUTs
- 1064 LUT
- Flip-flops
- 1596 FF
- Block RAM
- 63 Kbit
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →BASE DEVICE
PGC10K
Compa CPLD base device.
- LUTs
- 8256 LUT
- Flip-flops
- 12384 FF
- Block RAM
- 405 Kbit
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →BASE DEVICE
PGL12G
Logos FPGA base device.
- Logic elements
- 12480 LE
- Block RAM
- 540 Kbit
- 18x18 APM blocks
- 20 blocks
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →BASE DEVICE
PGL50H
Logos FPGA base device.
- Logic elements
- 51360 LE
- Block RAM
- 2412 Kbit
- 18x18 APM blocks
- 84 blocks
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →8 device references
No model matches this search. Clear the filter or send the exact part number for review.
Browse the full PangoMicro / 紫光同创 product map →
WITHIN THIS PRODUCT LINE
Series & subcategories
Titan
Titan is a product-line reference within PangoMicro / 紫光同创. Use the manufacturer source to confirm the exact device or deliverable and its current support status.
2 device refs · 0 ordering codesExplore Titan →Logos
Logos is a product-line reference within PangoMicro / 紫光同创. Use the manufacturer source to confirm the exact device or deliverable and its current support status.
2 device refs · 0 ordering codesExplore Logos →Kosmo
Kosmo is a product-line reference within PangoMicro / 紫光同创. Use the manufacturer source to confirm the exact device or deliverable and its current support status.
2 device refs · 0 ordering codesExplore Kosmo →Compa
Compa is Pango's low-power CPLD family for glue logic, bridging and sequencing; compare device tables and tool support.
2 device refs · 0 ordering codesExplore Compa →SELECTION CONTEXT
Working with Product lines
Define the required function
Representative product lines from the linked manufacturer reference.
Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.
Check the integration boundary
Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.
Open the manufacturer reference ↗ENGINEERING DECISIONS
What to confirm before selection
Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.
- Use the vendor-native logic, memory and DSP definitions; unlike resource units are not directly equivalent.
- Confirm package pinout, I/O bank voltages, configuration method and the supported tool release before layout.
- Review power sequencing, decoupling, BGA escape routing and programming access with the complete ordering number.
Move from family to full ordering number
Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.
Send the exact project requirement →Preparing a complete board?
Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.
PCBA project preparation →EVIDENCE & DEVELOPMENT
Documents for this product line
Start with the device table, then check electrical limits, ordering information and the applicable tool release.
Product lines — manufacturer referenceManufacturer product documentationPrimary source ↗Pango Kosmo-2 seriesProduct selection tableWeb ↗Pango Titan-2 seriesProduct selection tableWeb ↗Pango Compa seriesProduct selection tableWeb ↗Pango Logos seriesProduct selection tableWeb ↗
More PangoMicro / 紫光同创 development resources
Official product reference ↗
Manufacturer or identified public portfolio reference.
These broader manufacturer resources do not establish support or compatibility for every device on this page.
PRACTICAL QUESTIONS
Product lines selection questions
How do I select a model within Product lines?
Start with the documented product scope: Representative product lines from the linked manufacturer reference. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.
Is a base-device name enough to place an order?
A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.
Can the listed devices use the same PCB or development tools?
A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.
What should I include for sourcing or PCBA review?
Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.
PREPARE A USEFUL INQUIRY
Build your selection brief.
Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.
Open quotation form →Sources & portfolio context
PangoMicro / 紫光同创 Product lines reference ↗
Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.
← Complete PangoMicro / 紫光同创 product map