Get a quote for your FPGA board.
Fabrication, assembly, BGA and sourcing from one team that builds FPGA hardware every day — high layer counts, fine-pitch BGAs, genuine parts.
Request received
Thanks — an FPGA engineer will get back to you within one business day, with your free DFM review.
From files to tested boards, one team.
A single quote covers fabrication, assembly and parts — with a manufacturability review before anything is built.
Upload
Send Gerber or ODB++, your BOM and pick-and-place. One request covers the whole board.
DFM & quote
We review your design for manufacturability and return a quote, usually within 24 hours.
Approve
Confirm scope and files. Sign an NDA first if you'd like — no problem.
Build & ship
We source, fabricate, assemble and X-ray every BGA, then ship tested boards.
Built for the hardest board on your bench.
FPGA boards are high-layer-count, fine-pitch and expensive. We specialise in exactly that.
Built around the ball grid array
Every FPGA is a BGA. We develop board-specific reflow profiles, X-ray 100% of BGAs, and can rework and reball costly devices.
BGA assembly →Genuine parts, verified
High-value FPGAs are a counterfeit target. We source through trusted channels with inspection, traceability and a certificate of conformance.
Component sourcing →DFM review, before you build
We catch impedance, via-in-pad and BGA-escape errors in your files — the mistakes that turn an expensive FPGA board into a re-spin.
Free DFM review →One team, bare board to test
Fabrication, sourcing and assembly on one schedule and one point of contact — no finger-pointing between vendors.
PCB fabrication →Before you send your files
Usually within 24 hours, and always within one business day. Every quote includes a free DFM review of your design at no charge.
Gerber or ODB++ for the board, a bill of materials (BOM), and pick-and-place (centroid) data for assembly. Send whatever you have — we'll tell you if anything's missing.
No. We build everything from a single prototype to full production runs — low-volume and one-off FPGA boards are a core part of what we do.
Yes. With turnkey assembly we procure the entire BOM, including scarce or long-lead FPGAs, with counterfeit-avoidance controls on high-value parts.
Yes. Because BGA joints are hidden under the package, we X-ray 100% of BGAs to check for voids, bridges and head-in-pillow defects — not a sample.
Yes. Tick the NDA box on the form and we'll send one before you share any files. Your design stays confidential either way.
Ready to build your FPGA board?
One quote for fabrication, assembly, BGA and sourcing — with a free DFM review.
Get a quote ➜