FPGA DEVICES · ENGINEERING · SOURCING Source-linked information. Clear project requirements.

AMD / Xilinx / Zynq-7000 SoC

XC7Z045-3FFG676E

FFG676 · Extended (E) · Speed grade -3

Lifecycle & ordering review: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation. Evidence and conditions ↓

Core fields reviewed 2026-11-11
Source links and conditions accompany each parameter.

XC7Z045-3FFG676E: PL VCCINT: 0.97–1.03 V; A ±5% 1.00 V source fails this interval. Original technical schematic, not a pinout or footprint.
Technical schematicPL VCCINT: 0.97–1.03 V. A ±5% 1.00 V source fails this interval. Original educational schematic; calculations are hypothetical where shown. Not to scale, not a pinout, not a PCB footprint. Technical references ↗

FPGA.io Part Number FIO-14B3D0FB92D5779DInternal catalogue reference · manufacturer MPN remains unchanged

Logic cells
350000 logic cells
Block RAM capacity
19620 Kb
DSP slices
900 DSP48E1
User I/O in this package
250 I/O

SOURCING REFERENCES

Price & delivery references

Get Price & Lead Time ↗

No verified supplier stock or price is currently displayed here. Request a quotation for your quantity and required delivery date.

Check this exact MPN at external distributors

Search links do not establish stock, price or an authorized distribution relationship. Check the full code, package and grade at the source.

PRODUCT OVERVIEW

About XC7Z045-3FFG676E

XC7Z045-3FFG676E is a system-on-chip combining an Arm processing system and FPGA programmable logic in the AMD / Xilinx Zynq-7000 SoC family, supplied in the FFG676 package. Its reviewed resources include 350,000 logic cells, 19,620 Kb of block RAM, 250 I/O for this device/package combination. This ordering code specifies speed grade -3 and Extended (E) temperature grade. The selected device/package has 8 GTX channels; check this package-level limit before planning serial interfaces. The user-I/O figure here refers to PL SelectIO only. The 128 PS I/O in UG865 are a separate functional allocation, not interchangeable general-purpose PL pins. Use the linked manufacturer data sheets for electrical limits, pin assignments and timing. FPGA.io can review the complete part number for chip sourcing or a combined sourcing and PCBA project.

  • Logic cells350,000 logic cells
  • Block RAM capacity19,620 Kb
  • DSP slices900 DSP48E1
  • User I/O in this package250 I/O
  • Package codeFFG676
  • Junction temperature (Tj)0 to +100 °C
Review parameter sources and conditions ↓

Technical specifications

XC7Z045 SoC: PL resources and exact device/package I/O, GTX, body, pitch, physical pins, full literal identity and grade limits. PS I/O are separate. Historical source revisions retained; present availability unknown.

Logic & memory

ParameterValueScope / evidence
Logic cells350000 logic cellsdeviceDS190Z045 ↗p3 Table1 XC7Z045 Logic Cells row
Conditions

Rounded vendor figure 350K, not a LUT count.

6-input LUTs218600 LUT6deviceDS190Z045 ↗p3 Table1 XC7Z045 Look-Up Tables row
Block RAM capacity19620 KbderivedDS190Z045 ↗p3 Table1 XC7Z045 545 × 36 Kb blocks
Conditions

Derived 545 × 36 = 19620 Kb; vendor headline is rounded 19.2 Mb. Not bytes; ports, width/depth geometry, parity/ECC and mapping overhead remain separate.

36 Kb block RAM blocks545 blocksdeviceDS190Z045 ↗p3 Table1 XC7Z045 Block RAM row
Conditions

Each source block is 36 Kb.

DSP slices900 DSP48E1deviceDS190Z045 ↗p3 Table1 XC7Z045 DSP Slices row; DS191 p58 Table70 DSP48E1 architecture cross-check
Conditions

900 slices; count does not establish application throughput.

Package & interfaces

ParameterValueScope / evidence
User I/O in this package250 I/Odevice-packageUG865Z045 ↗p11 Table1-4 XC7Z045 / FFG676
Conditions

PL SelectIO only: 100 HR + 150 HP. Separate 128 PS I/O are not interchangeable PL pins. Differential counts are alternate uses, not additive.

Serial transceivers in this package8 GTX channelsdevice-packageUG865Z045 ↗p10 Table1-3 XC7Z045 / FFG676
Conditions

8 exposed GTX channels; neither a family maximum nor a protocol qualification.

Package codeFFG676MPNXCN20011Z045 ↗p4 Table6 exact XC7Z045-3FFG676E, right Replacement Part column
Conditions

Historical replacement code, not the affected V package code.

Package ball count676 ballspackagePINSZ045676 ↗Header xc7z045ffg676; 676 distinct physical package-pin rows
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

Package body27 × 27 mmpackageUG865Z045 ↗p88 Figure4-12 (XC7Z035/XC7Z045 FFG676), D and E
Conditions

Package body only, excluding PCB courtyard. For FFG900, cited lid variants share this body size; no lid variant is inferred for a supplied lot.

Ball pitch1 mmpackageUG865Z045 ↗p88 Figure4-12, e
Conditions

Nominal ball pitch. A body drawing is not a fabrication-ready land pattern.

Package terminals / leads (vendor count)676 pinspackagePINSZ045676 ↗Header xc7z045ffg676; 676 distinct physical package-pin rows
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

Operating conditions

ParameterValueScope / evidence
Speed grade-3MPNXCN20011Z045 ↗p4 Table6 exact literal XC7Z045-3FFG676E
Conditions

DS190 p23 Table7 cross-checks permitted grade combinations. Not a single application clock rating.

Junction temperature (Tj)0 to +100 °CgradeDS191Z045 ↗p4 Table2 Tj E row
Conditions

Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.

Temperature gradeExtended (E)MPNDS190Z045 ↗p23 Table7 XC7Z045 group and Figure4; exact letter in XCN20011 p4
Core voltage conditions0.97 to 1.03 VgradeDS191Z045 ↗p3 Table2 VCCINT for -3/-2/-1
Conditions

PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.

Maximum application clockNot confirmeddesign
Conditions

Design-specific timing not established.

Application powerNot confirmeddesign
Conditions

Workload, implementation and thermal analysis required.

Minimum junction temperature0 °CgradeDS191Z045 ↗p4 Table2 Tj E row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

Maximum junction temperature100 °CgradeDS191Z045 ↗p4 Table2 Tj E row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

Temperature referenceJunction temperature (Tj)gradeDS191Z045 ↗p4 Table2 Tj rows
Conditional temperature operationRecommended operating Tj rangegradeDS191Z045 ↗p4 Table2 Tj E row
Conditions

DS191 Table2 and applicable notes. No extended or over-temperature qualification is asserted.

Minimum core voltage0.97 VgradeDS191Z045 ↗p3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Nominal core voltage1 VgradeDS191Z045 ↗p3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Maximum core voltage1.03 VgradeDS191Z045 ↗p3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Supply & status

ParameterValueScope / evidence
Current lifecycleNot confirmedsupplyXCN20011Z045 ↗p4 Table6 replacement-part columns
Conditions

Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Available stockNot confirmedsupply
Conditions

Current inventory, USD price and lead time are not verified. Request a quotation for the full ordering code.

MANUFACTURER REFERENCES

Official documents & PDF datasheets

Use the electrical data sheet together with the device overview and package/pinout information.

Data sheet / device referenceDS190 — Zynq-7000 SoC Data Sheet: Overviewp3 Table1 XC7Z045 column; p23 Table7 and Figure4 ordering information. Retained original revision visually reviewed; not a claim of latest revision. · Rev 1.11.1 · 2018-07-02Official PDF ↗Package & pinoutUG865 — Zynq-7000 SoC Packaging and Pinout Product Specificationpp9–11 Tables1-1,1-3,1-4; p27 original device/package pin-file links; p88 Figure4-12 FFG676 for XC7Z035/XC7Z045; pp89–90 Figures4-13/4-14 FFG900 lid variants. Body and pitch only; no lid variant inferred for a lot. · Rev 1.9 · 2021-07-28Official PDF ↗Lifecycle / discontinuation noticeXCN20011 — Selected Package Product Discontinuation Noticep4 Table6, right-block Replacement Part column. Ten exact XC7Z045 G ordering codes; historical recommendations, not affected V codes or current supply evidence. · Rev 1.0 · 2020-09-28Official PDF ↗Package & pinoutAMD XC7Z045 FFG676 official package pinoutHeader device/package identity; 676 unique physical pin rows counted. Linked from UG865 p27. Historical pin file, not a PCB footprint. · Rev Header 2012-09-18 · 2012-09-18Official pinout text ↗Selection & orderingDS191 — Zynq-7000 SoC DC and AC Switching Characteristics (Z-7030/35/45/100)pp3–4 Table2 and its notes; p58 Table70 DSP48E1. Historical revision; use applicable current manufacturer limits for final design. · Rev 1.18.1 · 2018-07-02Official PDF ↗

Full ordering-number evidence: p4 Table6, right block Replacement Part column; exact literal XC7Z045-3FFG676E. Original PDF table visually inspected..

Manufacturer documents may be revised. Verify the current revision and applicable device/package/grade before releasing a design.

DEVICE & PACKAGE DECISION

Budget the PL rail tolerance before choosing a regulator

For this non-L -3 ordering option, DS191 gives a PL VCCINT operating interval of 0.97 to 1.03 V, nominally 1.00 V. It is a specific rail requirement, not a single supply specification for the entire Zynq device.

Engineering screening guidance using reviewed catalogue evidence. Examples are hypothetical and advisory; validate your actual design and the exact ordering code.

Check the entire voltage error budget

A hypothetical 1.00 V regulator with ±5% tolerance spans 0.95 to 1.05 V and already exceeds both sourced PL VCCINT limits. At ±2%, its 0.98 to 1.02 V interval leaves only 10 mV to either limit before accounting for board drop, load transients, ripple and measurement uncertainty. These arithmetic screens do not select a regulator or validate the power network. Evaluate the voltage delivered at the device under the actual operating conditions.

What to carry into a quotation and design review

Keep XC7Z045-3FFG676E intact in the BOM and quotation. XCN20011 Table6 names this G code as a historical replacement recommendation; it does not establish current stock, current lifecycle or board compatibility. Compare the already-public XC7Z030-3FBG676E below to see the smaller XC7Z030 resource set and package-specific channels. Its 125K vendor logic cells, 400 DSP slices and 265 RAM blocks do not match this XC7Z045's 350K, 900 and 545. A similar family name cannot transfer bitstreams, pin plans, timing closure or a procurement approval. Request the exact part, quantity, grade and required date, then retain the supplier's written exceptions for review.

Hypothetical example: Parallel signal budget

Assumed inputs: 8 interfaces × 24 single-ended signals + 24 control signals + 16 reserved signals.

Calculation: 8 × 24 + 24 + 16 = 232 I/O.

Result: 18 I/O remain in the count-only budget (92.8% allocated).

Planning diagram: assumed I/O allocation
232 I/O assumed allocation / 250 documented package I/O; 18 I/O unallocated. Count-only planning diagram, not a pinout or bank assignment.
I/O budget for 232 allocated signals232 I/O assumed allocation / 250 documented package I/O; 18 I/O unallocated. Count-only planning diagram, not a pinout or bank assignment.

92.8% of the sourced package count allocated; 18 I/O unallocated.

Each signal consumes one single-ended user I/O in this example. Dedicated serial lanes are separate. Bank voltage, differential pairing, clocks, configuration use and actual pin allocation can reduce usable capacity. Reserved signals here are an assumed design allowance, not manufacturer-reserved pins.

Hypothetical example: Sample-buffer payload

Assumed inputs: 8 channels × 8192 samples/channel × 24 bits/sample.

Calculation: 8 × 8192 × 24 = 1,572,864 payload bits.

Result: Allocate at least 1,572,864 payload bits before adding memory overhead. The current reviewed embedded-memory reference is 19,620 Kb.

Payload arithmetic only. The source Kb/kb unit is retained; this example does not choose a decimal/binary conversion or claim a percentage fit. Round each buffer to the native memory-block geometry and check port width, depth, ECC/parity, dual-port use and implementation reports.

Public device and ordering comparisons

Compare exact package and grade conditions below. These are screening references; matching names, dimensions or resource counts do not establish pin compatibility or replacement approval.

XC7Z045-3FFG676E and already-public screening candidates
Condition / resourceXC7Z045-3FFG676E (selected)zynq-7000 / XC7Z045XC7Z030-3FBG676Ezynq-7000 / XC7Z030
PackageFFG676 [source]FBG676 [source]
Speed grade-3 [source]-3 [source]
GradeExtended (E) [source]Extended (E) [source]
Operating temperature (see basis/conditions)0 to +100 °C [source]0 to +100 °C [source]
Temperature basisJunction temperature (Tj) [source]Junction temperature (Tj) [source]
Body dimensions27 × 27 mm [source]27 × 27 mm [source]
Pitch1 mm [source]1 mm [source]
Package user I/O250 I/O [source]250 I/O [source]
Package dedicated channels8 GTX channels [source]4 GTX channels [source]
Logic cells (AMD)350,000 logic cells [source]125,000 logic cells [source]
Embedded block memory19,620 Kb [source]9,540 Kb [source]
Core rail reference0.97 to 1.03 V [source]0.97 to 1.03 V [source]

Native LUT4, LE and logic-cell metrics remain separate. Temperature is not converted to ambient; source notes define the operating basis. A family maximum is never substituted for package I/O or channels. No clock, power or stock figure is inferred.

Sources and conditions: XC7Z045-3FFG676E

Lifecycle / ordering: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Sources and conditions: XC7Z030-3FBG676E

Package: FFG676 → FBG676. Verify the applicable limits and design impact.

Lifecycle / ordering: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Exact identity evidence: XCN20011 — Selected Package Product Discontinuation Notice · p4 Table6, right block Replacement Part column; exact literal XC7Z045-3FFG676E. Original PDF table visually inspected. · Historical replacement recommendation only; not an affected-device EOL assertion, current availability or compatibility approval.

Practical questions for this selection

May the same tolerance be used for the processing-system rails?

No. DS191 Table2 lists the rails separately; its PS VCCPINT notes include CPU and DDR operating conditions. Note6 requires VCCINT and VCCBRAM on the same supply. Review every rail and the applicable notes, sequencing and decoupling requirements.

What does the numerical example establish for XC7Z045-3FFG676E?

It establishes arithmetic under the explicitly hypothetical inputs shown here. It is not a tool result, synthesis report, timing closure, pin-assignment validation or application qualification. Replace the assumptions with your signal list and memory geometry, then validate in the vendor tools.

Selection guide updated (UTC). Manufacturer-document revisions are listed separately.

Before placing this part on a board

  1. Use the full ordering number. Check the package pinout, power banks, speed grade and temperature range together.
  2. Complete timing and power analysis. A resource table cannot predict achievable frequency or application power.
  3. Define the manufacturing scope. Share the BGA footprint, stack-up, assembly requirements and test plan with your PCBA request.
Plan assembly for your FPGA board →

FROM SELECTION TO A BOARD

Design resources & implementation options

When to evaluate another implementation

For software-heavy control with limited parallel I/O, assess an MCU or processor against the same latency, interface and power requirements. For wide parallel datapaths or custom timing, compare FPGA architectures using a mapped design. For early prototyping, an evaluation board may reduce initial hardware work; verify its exact device, accessible interfaces and production suitability.

Explore semiconductor brands and product categories →

ENGINEERING SHORTLIST

Screen candidates for your design

Choose what may change before comparing resources. The default keeps the same manufacturer and family, so Zynq processing-system designs are not silently matched to pure FPGAs. Same-family results still require CPU, software, pinout and timing review.

14 full MPNs meet the selected scope and numeric constraints. Showing 1 device representatives, at most two per manufacturer, ordered by smallest excess resources. Temperature, timing and pinout still require review.

350000 logic cells · FBG676 · Commercial (C)

Differences and compatibility checks
  • Package: FFG676 → FBG676. Verify the applicable limits and design impact.
  • Temperature grade: Extended (E) → Commercial (C). Verify the applicable limits and design impact.
  • Speed grade: -3 → -1. Verify the applicable limits and design impact.

Numeric matches do not establish pin compatibility, protocol support, lifecycle or supply availability.

Numeric screening is not replacement approval.

Logic and DSP mapping, pinout, bank voltages, temperature, timing, protocol support and toolchain remain engineering checks. Serial channel quantity does not verify data rate or protocol support. Cross-brand candidates generally require board and HDL review.

Request a board and sourcing review →
Source addresses and citation trail

Full source addresses are retained below. Read each citation with its document revision, page, table and applicability conditions above.

  1. https://docs.amd.com/api/khub/documents/juMnxca71Tf2gfjmNyjM8A/content
  2. https://docs.amd.com/api/khub/documents/kOAtMqkVamwUDaIfCXO91A/content
  3. https://www.digikey.com/en/products?keywords=XC7Z045-3FFG676E
  4. https://www.mouser.com/c/?q=XC7Z045-3FFG676E
  5. https://uk.farnell.com/search?st=XC7Z045-3FFG676E
  6. https://www.arrow.com/en/products/search?q=XC7Z045-3FFG676E
  7. https://docs.amd.com/api/khub/documents/JoZLm9nfmlncXLgvQKL~sw/content
  8. https://download.amd.com/adaptive-socs-and-fpgas/developer/adaptive-socs-and-fpgas/package-pinout-files/z7packages/xc7z045ffg676pkg.txt
  9. https://docs.amd.com/api/khub/documents/0QG6MaFUXxeum~9JNcCOPw/content