Lifecycle & ordering review: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation. Evidence and conditions ↓
Core fields reviewed 2026-11-11 Source links and conditions accompany each parameter.
Technical schematicOriginal technical schematic for XC7Z030-1FBG676C. Not to scale, not a pinout and not a PCB footprint. The 128 PS I/O are separate from 250 PL I/O. Source revisions and conditions appear in the specifications. Technical references ↗
FPGA.io Part NumberFIO-73C4D5100F42C9BAInternal catalogue reference · manufacturer MPN remains unchanged
XC7Z030-1FBG676C is a system-on-chip combining an Arm processing system and FPGA programmable logic in the AMD / Xilinx Zynq-7000 SoC family, supplied in the FBG676 package. Its reviewed resources include 125,000 logic cells, 9,540 Kb of block RAM, 250 I/O for this device/package combination. This ordering code specifies speed grade -1 and Commercial (C) temperature grade. The selected device/package has 4 GTX channels; check this package-level limit before planning serial interfaces. The user-I/O figure here refers to PL SelectIO only. The 128 PS I/O in UG865 are a separate functional allocation, not interchangeable general-purpose PL pins. Use the linked manufacturer data sheets for electrical limits, pin assignments and timing. FPGA.io can review the complete part number for chip sourcing or a combined sourcing and PCBA project.
XC7Z030 SoC: PL resource counts and device/package-specific I/O, GTX, body, pitch, full ordering identity and grade limits. PS I/O are separate. Historical source revisions are retained; present availability is unknown.
Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.
Temperature grade
Commercial (C)
MPNDS190 ↗p23 Table7 XC7Z030 group and Figure4; exact letter in XCN20011 p4
Core voltage conditions
0.97 to 1.03 V
gradeDS191 ↗p3 Table2 VCCINT for -3/-2/-1Conditions
PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.
Maximum application clock
Not confirmed
designConditions
Design-specific timing not established.
Application power
Not confirmed
designConditions
Workload, implementation and thermal analysis required.
Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.
Available stock
Not confirmed
supplyConditions
Current inventory, USD price and lead time are not verified. Request a quotation for the full ordering code.
MANUFACTURER REFERENCES
Official documents & PDF datasheets
Use the electrical data sheet together with the device overview and package/pinout information.
Full ordering-number evidence: p4 Table6 6, left block Replacement Part column; exact literal XC7Z030-1FBG676C; original PDF word bbox 185.4, 365.08500000000004, 271.3863, 374.08500000000004.
Manufacturer documents may be revised. Verify the current revision and applicable device/package/grade before releasing a design.
For XC7Z030, FBG676 exposes 250 PL I/O, 87 more than FBG484. Both packages retain the same die resource counts and four GTX channels. The larger package changes board size and escape routing rather than adding logic or processor capacity.
Engineering screening guidance using reviewed catalogue evidence. Examples are hypothetical and advisory; validate your actual design and the exact ordering code.
Package-tradeoff exercise
Suppose a PL signal list needs 208 single-ended positions including its explicit reserve. It exceeds FBG484 by 45 and leaves 42 against the FBG676 total. The body grows from 23 × 23 mm to 27 × 27 mm: 529 to 729 mm², about 37.8% more body area. Body area excludes courtyard, fanout and assembly clearances; no layout compatibility follows from equal 1.0 mm pitch.
Before a sourcing or design decision
Keep XC7Z030-1FBG676C exactly as listed on the BOM and quotation. Verify the commercial junction range, -1 timing option, 676-ball package pin map and source revisions. XCN20011 lists this G code as a historical replacement recommendation, not as proof of present stock or a qualified substitute. The Kintex comparison below is a PL-only architectural reference; it does not replace the integrated Zynq processing system, software, boot or DDR design.
Result: 42 I/O remain in the count-only budget (83.2% allocated).
Planning diagram: assumed I/O allocation 208 I/O assumed allocation / 250 documented package I/O; 42 I/O unallocated. Count-only planning diagram, not a pinout or bank assignment.
83.2% of the sourced package count allocated; 42 I/O unallocated.
Each signal consumes one single-ended user I/O in this example. Dedicated serial lanes are separate. Bank voltage, differential pairing, clocks, configuration use and actual pin allocation can reduce usable capacity. Reserved signals here are an assumed design allowance, not manufacturer-reserved pins.
Result: Allocate at least 262,144 payload bits before adding memory overhead. The current reviewed embedded-memory reference is 9,540 Kb.
Payload arithmetic only. The source Kb/kb unit is retained; this example does not choose a decimal/binary conversion or claim a percentage fit. Round each buffer to the native memory-block geometry and check port width, depth, ECC/parity, dual-port use and implementation reports.
Public device and ordering comparisons
Compare exact package and grade conditions below. These are screening references; matching names, dimensions or resource counts do not establish pin compatibility or replacement approval.
XC7Z030-1FBG676C and already-public screening candidates
Native LUT4, LE and logic-cell metrics remain separate. Temperature is not converted to ambient; source notes define the operating basis. A family maximum is never substituted for package I/O or channels. No clock, power or stock figure is inferred.
Sources and conditions: XC7Z030-1FBG676C
Lifecycle / ordering: Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.
Package user I/O: 250 I/O.UG865 — Zynq-7000 SoC Packaging and Pinout Product Specification · revision 1.9 · p11 Table1-4, XC7Z030 / FBG676 · scope: device-package. PL SelectIO only: 100 HR + 150 HP. Separate 128 PS I/O are not interchangeable PL pins. Differential counts are alternate uses, not additive.
Package dedicated channels: 4 GTX channels.UG865 — Zynq-7000 SoC Packaging and Pinout Product Specification · revision 1.9 · p10 Table1-3, XC7Z030 / FBG676 · scope: device-package. Four exposed GTX channels; not a family-maximum substitution or protocol qualification.
Logic cells (AMD): 125,000 logic cells.DS190 — Zynq-7000 SoC Data Sheet: Overview · revision 1.11.1 · p3 Table1, XC7Z030 Logic Cells row · scope: device. Source reports the rounded vendor figure 125K. This is not a LUT count.
Embedded block memory: 9,540 Kb.DS190 — Zynq-7000 SoC Data Sheet: Overview · revision 1.11.1 · p3 Table1, XC7Z030 265 × 36 Kb blocks · scope: derived. Derived capacity 265 × 36 = 9540 Kb; vendor headline is rounded 9.3 Mb. Not bytes; port geometry, parity/ECC and implementation overhead remain separate.
Core rail reference: 0.97 to 1.03 V.DS191 — Zynq-7000 SoC DC and AC Switching Characteristics (Z-7030/35/45/100) · revision 1.18.1 · p3 Table2 VCCINT for -3/-2/-1 · scope: grade. PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.
Sources and conditions: XC7K160T-1FBG484C
Different family or manufacturer: review native logic/DSP architecture, HDL/IP portability and toolchain.
Package: FBG676 → FBG484. Verify the applicable limits and design impact.
Lifecycle / ordering: Current lifecycle not verified. Do not apply the V-package discontinuation notice to its G-package replacement.
Speed grade: -1.7 Series FPGAs Data Sheet: Overview · revision 2.6.1 · p. 16, Figure 2; Speed Grade legend · scope: MPN. Retain original ordering code -1 in the literal MPN. Datasheet grade is -1. This is not a single application clock limit.
Operating temperature (see basis/conditions): 0 to +85 °C.Kintex-7 FPGAs Data Sheet: DC and AC Switching Characteristics · revision 2.19 · p. 3, Table 2 Recommended Operating Conditions (continued); Tj Commercial (C) row · scope: grade. Junction temperature Tj, not ambient temperature. Apply only to a literal MPN with the corresponding grade; not a claim all grades are available.
Temperature basis: Tj.Kintex-7 FPGAs Data Sheet: DC and AC Switching Characteristics · revision 2.19 · p. 3, Table 2 Recommended Operating Conditions (continued); Tj Commercial (C) row · scope: grade. Junction temperature Tj, not ambient temperature. Apply only to a literal MPN with the corresponding grade; not a claim all grades are available.
Body dimensions: 23 x 23 mm.7 Series FPGAs Packaging and Pinout Product Specification · revision 1.20 · p. 11, Table 1-1; p. 266, Figure 4-12, D/E dimensions · scope: package. Package body width x length; excludes PCB keep-out and component height.
Package user I/O: 285 I/O.7 Series FPGAs Data Sheet: Overview · revision 2.6.1 · p. 4, Table 7, XC7K160T row, FBG484 columns · scope: device-package. Package-specific user I/O. HR + HP; excludes GT serial channels.
Package dedicated channels: 4 GTX.7 Series FPGAs Data Sheet: Overview · revision 2.6.1 · p. 4, Table 7, XC7K160T row, FBG484 columns; GTX column · scope: device-package. Number of channels exposed in this selected device/package; not device-family maximum.
Logic cells (AMD): 162,240 logic cells.7 Series FPGAs Data Sheet: Overview · revision 2.6.1 · p. 4, Table 6, XC7K160T row; Logic Cells column · scope: device. Vendor metric; not comparable to another architecture's ALMs.
Embedded block memory: 11,700 Kb.7 Series FPGAs Data Sheet: Overview · revision 2.6.1 · p. 4, Table 6, XC7K160T row; Block RAM Max (Kb) column · scope: device. Source unit retained: Kb means kilobits, not kilobytes.
Exact identity evidence:XCN20011 — Selected Package Product Discontinuation Notice · p4 Table6 6, left block Replacement Part column; exact literal XC7Z030-1FBG676C; original PDF word bbox 185.4, 365.08500000000004, 271.3863, 374.08500000000004 · Historical replacement recommendation column only; not an affected-device EOL assertion or current supply/compatibility approval.
Practical questions for this selection
Does FBG676 provide more logic than FBG484?
No. They are package options for the same XC7Z030 device. The cited difference is exposed PL I/O and package geometry. Resource, bank, pinout, timing, power and assembly checks remain separate.
What does the numerical example establish for XC7Z030-1FBG676C?
It establishes arithmetic under the explicitly hypothetical inputs shown here. It is not a tool result, synthesis report, timing closure, pin-assignment validation or application qualification. Replace the assumptions with your signal list and memory geometry, then validate in the vendor tools.
For software-heavy control with limited parallel I/O, assess an MCU or processor against the same latency, interface and power requirements. For wide parallel datapaths or custom timing, compare FPGA architectures using a mapped design. For early prototyping, an evaluation board may reduce initial hardware work; verify its exact device, accessible interfaces and production suitability.
Choose what may change before comparing resources. The default keeps the same manufacturer and family, so Zynq processing-system designs are not silently matched to pure FPGAs. Same-family results still require CPU, software, pinout and timing review.
39 full MPNs meet the selected scope and numeric constraints. Showing 2 device representatives, at most two per manufacturer, ordered by smallest excess resources. Temperature, timing and pinout still require review.
Package and grade labels match; pinout, electrical limits, timing and configuration compatibility still require verification.
Numeric matches do not establish pin compatibility, protocol support, lifecycle or supply availability.
Numeric screening is not replacement approval.
Logic and DSP mapping, pinout, bank voltages, temperature, timing, protocol support and toolchain remain engineering checks. Serial channel quantity does not verify data rate or protocol support. Cross-brand candidates generally require board and HDL review.
Closest documented device and package variants appear first. Package, grade and pinout may differ; these are comparison candidates, not approved replacements.