pSemi / Chips & IP
power and signal-chain ICs is a product-line reference within pSemi. Use the manufacturer source to confirm the exact device or deliverable and its current support status.
Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.
This category map is being expanded. Linked device examples have individual sources; they do not represent the complete manufacturer catalogue.
FROM FAMILY TO DEVICE
Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.
BASE DEVICE
High-speed high-side and low-side FET gate driver; archived manufacturer datasheet.
1 device reference
No model matches this search. Clear the filter or send the exact part number for review.
Browse the full pSemi product map →
WITHIN THIS PRODUCT LINE
RF mixers is a psemi product family or category shown in the manufacturer product navigation. Select the exact device from the manufacturer table.
0 device refs · 0 ordering codesExplore RF mixers →RF limiters is a psemi product family or category shown in the manufacturer product navigation. Select the exact device from the manufacturer table.
0 device refs · 0 ordering codesExplore RF limiters →Phase shifters is a psemi product family or category shown in the manufacturer product navigation. Select the exact device from the manufacturer table.
0 device refs · 0 ordering codesExplore Phase shifters →Power management ICs is a psemi product family or category shown in the manufacturer product navigation. Select the exact device from the manufacturer table.
0 device refs · 0 ordering codesExplore Power management ICs →SELECTION CONTEXT
power and signal-chain ICs is a product-line reference within pSemi. Use the manufacturer source to confirm the exact device or deliverable and its current support status.
Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.
Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.
Open the manufacturer reference ↗ENGINEERING DECISIONS
Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.
Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.
Send the exact project requirement →Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.
PCBA project preparation →EVIDENCE & DEVELOPMENT
Start with the device table, then check electrical limits, ordering information and the applicable tool release.
Manufacturer or identified public portfolio reference.
These broader manufacturer resources do not establish support or compatibility for every device on this page.
PRACTICAL QUESTIONS
Start with the documented product scope: power and signal-chain ICs is a product-line reference within pSemi. Use the manufacturer source to confirm the exact device or deliverable and its current support status. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.
A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.
A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.
Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.
PREPARE A USEFUL INQUIRY
Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.
Open quotation form →pSemi power and signal-chain ICs reference ↗
Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.
← Complete pSemi product map