FPGA COMPONENTS & BOARD MANUFACTURING For research, development & industrial systems

Phytium / 飞腾 / Chips & IP

Product lines

Representative product lines from the linked manufacturer reference.

Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.

Product lines — technical product-family map
Technical schematicFPGA.io technical schematic for Product lines. Product branches are shown as a navigation overview. This is an abstract diagram, not a product photograph, package drawing or pinout. Technical reference ↗
Product scopeChips & IP
Device references in this category3
Documented ordering codes0
Information checked2026-09-28

This category map is being expanded. Linked device examples have individual sources; they do not represent the complete manufacturer catalogue.

FROM FAMILY TO DEVICE

Chip models in Product lines

Documented device references

Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.

BASE DEVICE

D2000

Desktop processor with Phytium FTC663 cores.

CPU cores
8
CPU core
FTC663
Instruction set
64-bit Armv8
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →

BASE DEVICE

E2000Q

Embedded processor with heterogeneous Phytium cores.

CPU configuration
2 × FTC664 + 2 × FTC310
Instruction set
64-bit Armv8, ARM64 and ARM32 execution
Virtualization
Hardware support
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →

BASE DEVICE

FT-1500A/16

Server processor using Phytium FTC660 cores.

Processor cores
16 × FTC660
Instruction set
64-bit Armv8
Pipeline
Out-of-order, four-issue superscalar
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →

3 device references

WITHIN THIS PRODUCT LINE

Series & subcategories

SELECTION CONTEXT

Working with Product lines

Define the required function

Representative product lines from the linked manufacturer reference.

Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.

Check the integration boundary

Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.

Open the manufacturer reference ↗

ENGINEERING DECISIONS

What to confirm before selection

Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.

  1. Select the instruction set, operating-system/BSP support, boot flow and memory interface for the target application.
  2. Check thermal design, power rails, high-speed layout constraints and production availability at the exact processor level.

Move from family to full ordering number

Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.

Send the exact project requirement →

Preparing a complete board?

Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.

PCBA project preparation →

EVIDENCE & DEVELOPMENT

Documents for this product line

Start with the device table, then check electrical limits, ordering information and the applicable tool release.

More Phytium / 飞腾 development resources

These broader manufacturer resources do not establish support or compatibility for every device on this page.

PRACTICAL QUESTIONS

Product lines selection questions

How do I select a model within Product lines?

Start with the documented product scope: Representative product lines from the linked manufacturer reference. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.

Is a base-device name enough to place an order?

A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.

Can the listed devices use the same PCB or development tools?

A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.

What should I include for sourcing or PCBA review?

Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.

PREPARE A USEFUL INQUIRY

Build your selection brief.

Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.

Open quotation form →

Sources & portfolio context

Phytium / 飞腾 Product lines reference ↗

Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.

← Complete Phytium / 飞腾 product map

Related entries in this category