BASE DEVICE
MP1584
Step-down switching regulator; official page marks this device not recommended for new designs.
- Input voltage
- 4.5 to 28 V
- Output current
- 3 A
- Switching frequency
- 100 kHz to 1.5 MHz
Monolithic Power Systems / Chips & IP
Product lines
Representative product lines from the linked manufacturer reference.
Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.
Product scopeChips & IP
Device references in this category3
Documented ordering codes10
Information checked2026-09-28
This category map is being expanded. Linked device examples have individual sources; they do not represent the complete manufacturer catalogue.
FROM FAMILY TO DEVICE
Chip models in Product lines
Documented device references
Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.
BASE DEVICE
MP2617B
Switch-mode single-cell lithium-ion charger with power-path management.
- Battery arrangement
- Single-cell lithium-ion
- Charge voltage
- 4.2 V
- Charger rating
- 3 A
2 ordering codesMP2617BGL-P →MP2617BGL-Z →
Specifications & documents →BASE DEVICE
MP6500
Bipolar stepper driver with an integrated translator and current regulation.
- Input range
- 4.5 to 35 V
- Output current
- Up to 2.5 A, package and thermal conditions dependent
- Bridge count
- 2 full bridges
3 device references
No model matches this search. Clear the filter or send the exact part number for review.
Browse the full Monolithic Power Systems product map →
WITHIN THIS PRODUCT LINE
Series & subcategories
DC/DC converters
DC/DC converters is a product-line reference within Monolithic Power Systems. Use the manufacturer source to confirm the exact device or deliverable and its current support status.
1 device refs · 4 ordering codesBuck converters 0 device refs · 0 ordering codesBoost converters 0 device refs · 0 ordering codesAC-DC converters 0 device refs · 0 ordering codes
Explore DC/DC converters →battery management
battery management is a product-line reference within Monolithic Power Systems. Use the manufacturer source to confirm the exact device or deliverable and its current support status.
1 device refs · 2 ordering codesExplore battery management →motor drivers
motor drivers is a product-line reference within Monolithic Power Systems. Use the manufacturer source to confirm the exact device or deliverable and its current support status.
1 device refs · 4 ordering codesBLDC motor drivers 0 device refs · 0 ordering codesStepper motor drivers 0 device refs · 0 ordering codes
Explore motor drivers →LDO regulators
LDO regulators is a mps product family or category shown in the manufacturer product navigation. Select the exact device from the manufacturer table.
0 device refs · 0 ordering codesExplore LDO regulators →Gate drivers
Gate drivers is a mps product family or category shown in the manufacturer product navigation. Select the exact device from the manufacturer table.
0 device refs · 0 ordering codesExplore Gate drivers →LED drivers
LED drivers is a mps product family or category shown in the manufacturer product navigation. Select the exact device from the manufacturer table.
0 device refs · 0 ordering codesExplore LED drivers →Audio amplifiers
Audio amplifiers is a mps product family or category shown in the manufacturer product navigation. Select the exact device from the manufacturer table.
0 device refs · 0 ordering codesExplore Audio amplifiers →Data converters
Data converters is a mps product family or category shown in the manufacturer product navigation. Select the exact device from the manufacturer table.
0 device refs · 0 ordering codesExplore Data converters →Sensors
Sensors is a mps product family or category shown in the manufacturer product navigation. Select the exact device from the manufacturer table.
0 device refs · 0 ordering codesExplore Sensors →SELECTION CONTEXT
Working with Product lines
Define the required function
Representative product lines from the linked manufacturer reference.
Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.
Check the integration boundary
Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.
Open the manufacturer reference ↗ENGINEERING DECISIONS
What to confirm before selection
Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.
- Size voltage, current, transient response, switching frequency and thermal margin for the complete power stage.
- Review package losses, gate-drive needs, protection behavior and recommended layout; similar ratings do not establish equivalence.
- Compare accuracy, noise, bandwidth, offset/drift and supply/headroom under the actual operating conditions.
- Check layout, reference, grounding and input/output limits using the device datasheet and evaluation circuit.
Move from family to full ordering number
Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.
Send the exact project requirement →Preparing a complete board?
Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.
PCBA project preparation →EVIDENCE & DEVELOPMENT
Documents for this product line
Start with the device table, then check electrical limits, ordering information and the applicable tool release.
Product lines — manufacturer referenceManufacturer product documentationPrimary source ↗MP1584 product pageDescription, Features & Benefits and lifecycle bannerWeb ↗MPS MP2617B battery chargerProduct heading and DescriptionWeb ↗MPS MP6500 stepper motor driverDescription and FeaturesWeb ↗
More Monolithic Power Systems development resources
Official product portfolio ↗
Manufacturer or identified public portfolio reference.
These broader manufacturer resources do not establish support or compatibility for every device on this page.
PRACTICAL QUESTIONS
Product lines selection questions
How do I select a model within Product lines?
Start with the documented product scope: Representative product lines from the linked manufacturer reference. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.
Is a base-device name enough to place an order?
A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.
Can the listed devices use the same PCB or development tools?
A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.
What should I include for sourcing or PCBA review?
Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.
PREPARE A USEFUL INQUIRY
Build your selection brief.
Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.
Open quotation form →Sources & portfolio context
Monolithic Power Systems Product lines reference ↗
Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.
← Complete Monolithic Power Systems product map