BASE DEVICE
MPF050T
PolarFire nonvolatile FPGA base device.
- Logic elements
- 48 K
- Total RAM
- 3.6 Mb
- 18 x 18 MACC blocks
- 150
1 ordering codeMPF050T-1FCSG325I →
Specifications & documents →Microchip Technology / Chips & IP
PolarFire
Nonvolatile mid-range FPGA family with embedded memory, DSP and optional high-speed serial interfaces.
Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.
Product scopeChips & IP
Device references in this category4
Documented ordering codes11
Information checked2026-09-28
FROM FAMILY TO DEVICE
Chip models in PolarFire
Documented device references
Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.
BASE DEVICE
MPF050TC
PolarFire Core base device; Core variants omit high-speed transceivers.
- Logic elements
- 48 K LE
- Total RAM
- 3.6 Mbits
- 18x18 MACC math blocks
- 150 blocks
2 ordering codesMPF050TC-FCSG325E →MPF050TC-FCSG325I →
Specifications & documents →BASE DEVICE
MPF300T
PolarFire nonvolatile FPGA base device.
- Logic elements
- 300 K
- Total RAM
- 20.6 Mb
- 18 x 18 MACC blocks
- 924
BASE DEVICE
MPF500TC
PolarFire Core base device; Core variants omit high-speed transceivers.
- Logic elements
- 481 K LE
- Total RAM
- 33 Mbits
- 18x18 MACC math blocks
- 1480 blocks
1 ordering codeMPF500TC-FCG784E →
Specifications & documents →4 device references
No model matches this search. Clear the filter or send the exact part number for review.
Browse the full Microchip Technology product map →
WITHIN THIS PRODUCT LINE
Series & subcategories
PolarFire Core
Cost-oriented PolarFire devices for designs that do not need high-speed serial transceivers.
2 device refs · 3 ordering codesExplore PolarFire Core →SELECTION CONTEXT
Working with PolarFire
Define the required function
Nonvolatile mid-range FPGA family with embedded memory, DSP and optional high-speed serial interfaces.
Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.
Check the integration boundary
Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.
Open the manufacturer reference ↗ENGINEERING DECISIONS
What to confirm before selection
Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.
- Select the transceiver-equipped or Core branch.
- Budget memory bandwidth, I/O and fabric resources for the exact device.
Move from family to full ordering number
Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.
Send the exact project requirement →Preparing a complete board?
Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.
PCBA project preparation →EVIDENCE & DEVELOPMENT
Documents for this product line
Start with the device table, then check electrical limits, ordering information and the applicable tool release.
Microchip PolarFire FPGAsPolarFire FPGA product tableWeb ↗PolarFire Core FPGAs and SoC FPGAs Sell SheetPolarFire Core FPGA Family tablePDF ↗
More Microchip Technology development resources
FPGA portfolio ↗
Official FPGA, SoC and radiation-tolerant family overview.
FPGA documentation ↗
Device data sheets, application notes and design documentation.
FPGA boards and kits ↗
Vendor development boards, expansion cards and programming hardware.
FPGA licensing ↗
Device and feature support by Libero licence type.
These broader manufacturer resources do not establish support or compatibility for every device on this page.
PRACTICAL QUESTIONS
PolarFire selection questions
How do I select a model within PolarFire?
Start with the documented product scope: Nonvolatile mid-range FPGA family with embedded memory, DSP and optional high-speed serial interfaces. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.
Is a base-device name enough to place an order?
A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.
Can the listed devices use the same PCB or development tools?
A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.
What should I include for sourcing or PCBA review?
Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.
PREPARE A USEFUL INQUIRY
Build your selection brief.
Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.
Open quotation form →Sources & portfolio context
Microchip Technology PolarFire reference ↗
Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.
← Complete Microchip Technology product map