BASE DEVICE
HX8K
iCE40 LP/HX FPGA base device as named in the official selector.
- Logic cells
- 7680
- Embedded RAM
- 128 kbit
- Nonvolatile configuration memory
- NVCM
1 ordering codeICE40HX8K-BG121 →
Specifications & documents →Lattice Semiconductor / Chips & IP
iCE40 LP/HX
Established low-density FPGA branches offering different power and performance priorities.
Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.
Product scopeChips & IP
Device references in this category2
Documented ordering codes3
Information checked2026-09-28
FROM FAMILY TO DEVICE
Chip models in iCE40 LP/HX
Documented device references
Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.
BASE DEVICE
LP1K
iCE40 LP/HX FPGA base device as named in the official selector.
- Logic cells
- 1280
- Embedded RAM
- 64 kbit
- Nonvolatile configuration memory
- NVCM
2 ordering codesICE40LP1K-CB81 →ICE40LP1K-CM81 →
Specifications & documents →2 device references
No model matches this search. Clear the filter or send the exact part number for review.
Browse the full Lattice Semiconductor product map →
WITHIN THIS PRODUCT LINE
Series & subcategories
iCE40 LM
iCE40 LM is a manufacturer-named product family or series. Check the exact device, documentation, tool support and lifecycle before design-in.
0 device refs · 0 ordering codesExplore iCE40 LM →SELECTION CONTEXT
Working with iCE40 LP/HX
Define the required function
Established low-density FPGA branches offering different power and performance priorities.
Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.
Check the integration boundary
Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.
Open the manufacturer reference ↗ENGINEERING DECISIONS
What to confirm before selection
Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.
- Choose LP or HX using the applicable electrical data.
- Confirm the device/package combination and supported design flow.
Move from family to full ordering number
Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.
Browse reviewed FPGA device data →Preparing a complete board?
Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.
PCBA project preparation →EVIDENCE & DEVELOPMENT
Documents for this product line
Start with the device table, then check electrical limits, ordering information and the applicable tool release.
More Lattice Semiconductor development resources
Lattice product portfolio ↗
Official family entry points and product-selector access.
Lattice kits and boards ↗
Search official development platforms and supporting design files.
Mature and discontinued devices ↗
Review maturity, discontinuance notices and suggested newer families.
Lattice Radiant ↗
Software downloads, release notes and device-support documentation.
These broader manufacturer resources do not establish support or compatibility for every device on this page.
PRACTICAL QUESTIONS
iCE40 LP/HX selection questions
How do I select a model within iCE40 LP/HX?
Start with the documented product scope: Established low-density FPGA branches offering different power and performance priorities. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.
Is a base-device name enough to place an order?
A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.
Can the listed devices use the same PCB or development tools?
A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.
What should I include for sourcing or PCBA review?
Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.
PREPARE A USEFUL INQUIRY
Build your selection brief.
Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.
Open quotation form →Sources & portfolio context
Lattice Semiconductor iCE40 LP/HX reference ↗
Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.
← Complete Lattice Semiconductor product map