Infineon Technologies / Chips & IP
Choose architecture and peripheral integration around the control task.
Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.
FROM FAMILY TO DEVICE
Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.
ORDERING REFERENCE
PSOC 62 MCU ordering variant with two Arm cores and CAPSENSE.
BASE DEVICE
AURIX TC3 automotive TriCore microcontroller.
BASE DEVICE
XMC4800 Cortex-M4 MCU with an EtherCAT node.
3 device references
No model matches this search. Clear the filter or send the exact part number for review.
Browse the full Infineon Technologies product map →
WITHIN THIS PRODUCT LINE
Microcontroller family in Infineon's automotive and control portfolio.
1 device refs · 1 ordering codesMicrocontroller portfolio spanning programmable and connected embedded applications.
1 device refs · 1 ordering codesIndustrial-control microcontroller family.
1 device refs · 2 ordering codesTRAVEO T2G is Infineon’s automotive MCU line for body and cockpit applications.
0 device refs · 0 ordering codesExplore TRAVEO T2G →MOTIX integrates a microcontroller with motor-control functions; SoC and SiP forms must be checked at product level.
0 device refs · 0 ordering codesExplore MOTIX motor-control SoCs/SiPs →SELECTION CONTEXT
Choose architecture and peripheral integration around the control task.
Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.
Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.
Open the manufacturer reference ↗ENGINEERING DECISIONS
Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.
Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.
Send the exact project requirement →Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.
PCBA project preparation →EVIDENCE & DEVELOPMENT
Start with the device table, then check electrical limits, ordering information and the applicable tool release.
Locate hardware by product and application.
Review kit contents, guides and BSP connections.
Find the supported development workflow and software packages.
These broader manufacturer resources do not establish support or compatibility for every device on this page.
PRACTICAL QUESTIONS
Start with the documented product scope: Choose architecture and peripheral integration around the control task. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.
A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.
A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.
Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.
PREPARE A USEFUL INQUIRY
Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.
Open quotation form →Infineon Technologies Microcontrollers reference ↗
Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.
← Complete Infineon Technologies product map