BASE DEVICE
GW5AST-138
Arora V FPGA with an AE350 RISC-V subsystem and serial transceivers.
- LUT4
- 138240
- Block SRAM
- 6120 kb
- DSP blocks
- 298
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →GOWIN Semiconductor / Chips & IP
Arora V transceiver variants
GW5AT and related variants add serial connectivity for interface-intensive systems.
Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.
Product scopeChips & IP
Device references in this category4
Documented ordering codes0
Information checked2026-09-28
FROM FAMILY TO DEVICE
Chip models in Arora V transceiver variants
Documented device references
Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.
BASE DEVICE
GW5AT-15
Arora V GW5AT FPGA with serial transceivers.
- LUT4
- 15120
- Block SRAM
- 630 kb
- DSP blocks
- 28
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →BASE DEVICE
GW5AT-60
Arora V GW5AT FPGA with serial transceivers.
- LUT4
- 59904
- Block SRAM
- 2124 kb
- DSP blocks
- 118
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →BASE DEVICE
GW5AT-138
Arora V GW5AT FPGA with serial transceivers.
- LUT4
- 138240
- Block SRAM
- 6120 kb
- DSP blocks
- 298
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →4 device references
No model matches this search. Clear the filter or send the exact part number for review.
Browse the full GOWIN Semiconductor product map →
SELECTION CONTEXT
Working with Arora V transceiver variants
Define the required function
GW5AT and related variants add serial connectivity for interface-intensive systems.
Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.
Check the integration boundary
Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.
Open the manufacturer reference ↗ENGINEERING DECISIONS
What to confirm before selection
Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.
- Check package-specific line-rate restrictions.
- Review channel allocation, reference clocks and supported protocol modes.
Move from family to full ordering number
Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.
Send the exact project requirement →Preparing a complete board?
Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.
PCBA project preparation →EVIDENCE & DEVELOPMENT
Documents for this product line
Start with the device table, then check electrical limits, ordering information and the applicable tool release.
More GOWIN Semiconductor development resources
Arora V portfolio ↗
Family overview, variant distinctions and documentation entry point.
LittleBee portfolio ↗
Nonvolatile FPGA variants, integrated functions and product documentation.
GOWIN EDA downloads ↗
Standard, Education and programming-tool downloads; account access may be required.
Software licensing ↗
Official software licence request entry point.
These broader manufacturer resources do not establish support or compatibility for every device on this page.
PRACTICAL QUESTIONS
Arora V transceiver variants selection questions
How do I select a model within Arora V transceiver variants?
Start with the documented product scope: GW5AT and related variants add serial connectivity for interface-intensive systems. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.
Is a base-device name enough to place an order?
A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.
Can the listed devices use the same PCB or development tools?
A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.
What should I include for sourcing or PCBA review?
Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.
PREPARE A USEFUL INQUIRY
Build your selection brief.
Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.
Open quotation form →Sources & portfolio context
GOWIN Semiconductor Arora V transceiver variants reference ↗
Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.
← Complete GOWIN Semiconductor product mapRelated entries in this category
Arora V GW5AST 1 device refs · 0 ordering codes →GW5A traditional FPGA 0 device refs · 0 ordering codes →GW5AT transceiver FPGA 0 device refs · 0 ordering codes →GW5AR integrated RAM FPGA 0 device refs · 0 ordering codes →GW5AS embedded MCU FPGA 0 device refs · 0 ordering codes →GW5AST RISC-V FPGA 0 device refs · 0 ordering codes →