ORDERING REFERENCE
GD32F450IGH6
Cortex-M4 microcontroller from the GD32F450 line.
- Maximum clock
- 200 MHz
- Flash
- 1024 KB
- SRAM
- 256 KB
1 ordering codeGD32F450IGH6 →
Specifications & documents →GigaDevice / 兆易创新 / Chips & IP
GD32
GD32 is a product-line reference within GigaDevice / 兆易创新. Use the manufacturer source to confirm the exact device or deliverable and its current support status.
Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.
Product scopeChips & IP
Device references in this category1
Documented ordering codes1
Information checked2026-09-28
This category map is being expanded. Linked device examples have individual sources; they do not represent the complete manufacturer catalogue.
FROM FAMILY TO DEVICE
Chip models in GD32
Documented device references
Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.
1 device reference
No model matches this search. Clear the filter or send the exact part number for review.
Browse the full GigaDevice / 兆易创新 product map →
WITHIN THIS PRODUCT LINE
Series & subcategories
GD32H7
GD32H7 is a GD32 MCU series listed in GigaDevice product navigation; core and peripheral mix differ across lines.
0 device refs · 0 ordering codesExplore GD32H7 →GD32F5
GD32F5 is a GD32 MCU series listed in GigaDevice product navigation; core and peripheral mix differ across lines.
0 device refs · 0 ordering codesExplore GD32F5 →GD32G5
GD32G5 is a GD32 MCU series listed in GigaDevice product navigation; core and peripheral mix differ across lines.
0 device refs · 0 ordering codesExplore GD32G5 →GD32E5
GD32E5 is a GD32 MCU series listed in GigaDevice product navigation; core and peripheral mix differ across lines.
0 device refs · 0 ordering codesExplore GD32E5 →GD32F3
GD32F3 is a GD32 MCU series listed in GigaDevice product navigation; core and peripheral mix differ across lines.
0 device refs · 0 ordering codesExplore GD32F3 →GD32F1
GD32F1 is a GD32 MCU series listed in GigaDevice product navigation; core and peripheral mix differ across lines.
0 device refs · 0 ordering codesExplore GD32F1 →GD32VF103
GD32VF103 is a GD32 MCU series listed in GigaDevice product navigation; core and peripheral mix differ across lines.
0 device refs · 0 ordering codesExplore GD32VF103 →GD32L23x
Low-power GD32 MCU series.
0 device refs · 0 ordering codesExplore GD32L23x →GD32W515
Wireless GD32 MCU series.
0 device refs · 0 ordering codesExplore GD32W515 →GD32A5xx
Automotive GD32 MCU series.
0 device refs · 0 ordering codesExplore GD32A5xx →GD32A7xx
Automotive GD32 MCU series.
0 device refs · 0 ordering codesExplore GD32A7xx →SELECTION CONTEXT
Working with GD32
Define the required function
GD32 is a product-line reference within GigaDevice / 兆易创新. Use the manufacturer source to confirm the exact device or deliverable and its current support status.
Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.
Check the integration boundary
Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.
Open the manufacturer reference ↗ENGINEERING DECISIONS
What to confirm before selection
Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.
- Check the core, flash/RAM, peripherals, pin multiplexing and safety/security requirements together.
- Confirm debugger, IDE/compiler version, bootloader and in-circuit programming access for production.
- Confirm the memory technology, interface/protocol, capacity, organization and voltage against the controller.
- Review temperature grade, endurance/retention where applicable, package footprint and lifecycle notices.
- Compare accuracy, noise, bandwidth, offset/drift and supply/headroom under the actual operating conditions.
Move from family to full ordering number
Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.
Send the exact project requirement →Preparing a complete board?
Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.
PCBA project preparation →EVIDENCE & DEVELOPMENT
Documents for this product line
Start with the device table, then check electrical limits, ordering information and the applicable tool release.
GD32 — manufacturer referenceManufacturer product documentationPrimary source ↗GD32F450 product selectorGD32F450IGH6 rowWeb ↗
More GigaDevice / 兆易创新 development resources
Official product portfolio ↗
Manufacturer or identified public portfolio reference.
These broader manufacturer resources do not establish support or compatibility for every device on this page.
PRACTICAL QUESTIONS
GD32 selection questions
How do I select a model within GD32?
Start with the documented product scope: GD32 is a product-line reference within GigaDevice / 兆易创新. Use the manufacturer source to confirm the exact device or deliverable and its current support status. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.
Is a base-device name enough to place an order?
A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.
Can the listed devices use the same PCB or development tools?
A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.
What should I include for sourcing or PCBA review?
Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.
PREPARE A USEFUL INQUIRY
Build your selection brief.
Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.
Open quotation form →Sources & portfolio context
GigaDevice / 兆易创新 GD32 reference ↗
Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.
← Complete GigaDevice / 兆易创新 product map