BASE DEVICE
Ti40
Titanium Edge base device listed in the official family table.
- Logic elements
- 38925
- 10K block RAM capacity
- 1.53 Mb
- DSP blocks
- 100
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →Efinix / Chips & IP
Titanium Edge
Titanium branch emphasizing compact, low-power edge systems and enhanced high-speed I/O.
Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.
Product scopeChips & IP
Device references in this category3
Documented ordering codes11
Information checked2026-09-28
FROM FAMILY TO DEVICE
Chip models in Titanium Edge
Documented device references
Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.
BASE DEVICE
Ti70
Titanium Edge base device listed in the official family table.
- Logic elements
- 68218
- 10K block RAM capacity
- 2.62 Mb
- DSP blocks
- 160
0 ordering codesExact ordering-code evidence is still being collected.
Specifications & documents →BASE DEVICE
Ti125
Titanium Edge base device listed in the official family table.
- Logic elements
- 122792
- 10K block RAM capacity
- 5.9 Mb
- DSP blocks
- 288
3 device references
No model matches this search. Clear the filter or send the exact part number for review.
Browse the full Efinix product map →
SELECTION CONTEXT
Working with Titanium Edge
Define the required function
Titanium branch emphasizing compact, low-power edge systems and enhanced high-speed I/O.
Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.
Check the integration boundary
Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.
Open the manufacturer reference ↗ENGINEERING DECISIONS
What to confirm before selection
Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.
- Check HSIO generation and supported signalling.
- Confirm device documentation, tool support and production status.
Move from family to full ordering number
Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.
Send the exact project requirement →Preparing a complete board?
Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.
PCBA project preparation →EVIDENCE & DEVELOPMENT
Documents for this product line
Start with the device table, then check electrical limits, ordering information and the applicable tool release.
More Efinix development resources
Efinix documentation ↗
Family data sheets, interface guides and tool documentation.
Efinix development kits ↗
Official kits and daughter-card catalogue.
Efinity software ↗
Tool features, release details and licence instructions.
Efinix support centre ↗
Registration, software access and product support.
These broader manufacturer resources do not establish support or compatibility for every device on this page.
PRACTICAL QUESTIONS
Titanium Edge selection questions
How do I select a model within Titanium Edge?
Start with the documented product scope: Titanium branch emphasizing compact, low-power edge systems and enhanced high-speed I/O. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.
Is a base-device name enough to place an order?
A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.
Can the listed devices use the same PCB or development tools?
A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.
What should I include for sourcing or PCBA review?
Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.
PREPARE A USEFUL INQUIRY
Build your selection brief.
Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.
Open quotation form →Sources & portfolio context
Efinix Titanium Edge reference ↗
Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.
← Complete Efinix product map