BASE DEVICE
CCGM1A2
GateMate FPGA base device.
- Cologne programmable elements
- 40960 CPE
- Flip-flops / latches
- 81920 FF/latches
- 20 Kb block RAMs
- 128 blocks
1 ordering codeCCGM1A2-BGA324 →
Specifications & documents →Cologne Chip / Chips & IP
A2
A2 is a product-line reference within Cologne Chip. Use the manufacturer source to confirm the exact device or deliverable and its current support status.
Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.
Product scopeChips & IP
Device references in this category1
Documented ordering codes1
Information checked2026-09-28
This category map is being expanded. Linked device examples have individual sources; they do not represent the complete manufacturer catalogue.
FROM FAMILY TO DEVICE
Chip models in A2
Documented device references
Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.
1 device reference
No model matches this search. Clear the filter or send the exact part number for review.
Browse the full Cologne Chip product map →
SELECTION CONTEXT
Working with A2
Define the required function
A2 is a product-line reference within Cologne Chip. Use the manufacturer source to confirm the exact device or deliverable and its current support status.
Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.
Check the integration boundary
Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.
Open the manufacturer reference ↗ENGINEERING DECISIONS
What to confirm before selection
Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.
- Use the vendor-native logic, memory and DSP definitions; unlike resource units are not directly equivalent.
- Confirm package pinout, I/O bank voltages, configuration method and the supported tool release before layout.
- Review power sequencing, decoupling, BGA escape routing and programming access with the complete ordering number.
Move from family to full ordering number
Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.
Send the exact project requirement →Preparing a complete board?
Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.
PCBA project preparation →EVIDENCE & DEVELOPMENT
Documents for this product line
Start with the device table, then check electrical limits, ordering information and the applicable tool release.
A2 — manufacturer referenceManufacturer product documentationPrimary source ↗Cologne Chip GateMate Product BriefDevice resources tablePDF ↗
More Cologne Chip development resources
Official product reference ↗
Manufacturer or identified public portfolio reference.
These broader manufacturer resources do not establish support or compatibility for every device on this page.
PRACTICAL QUESTIONS
A2 selection questions
How do I select a model within A2?
Start with the documented product scope: A2 is a product-line reference within Cologne Chip. Use the manufacturer source to confirm the exact device or deliverable and its current support status. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.
Is a base-device name enough to place an order?
A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.
Can the listed devices use the same PCB or development tools?
A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.
What should I include for sourcing or PCBA review?
Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.
PREPARE A USEFUL INQUIRY
Build your selection brief.
Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.
Open quotation form →Sources & portfolio context
Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.
← Complete Cologne Chip product mapRelated entries in this category
GateMate A1 1 device refs · 1 ordering codes →GateMate A4 — upcoming 0 device refs · 0 ordering codes →GateMate A9 — bare-die availability 0 device refs · 0 ordering codes →GateMate A16 — bare-die availability 0 device refs · 0 ordering codes →GateMate A25 — bare-die availability 0 device refs · 0 ordering codes →