FPGA COMPONENTS & BOARD MANUFACTURING For research, development & industrial systems
Request a quote

AMD / Xilinx / Chips & IP

Zynq UltraScale+ EG

The MPSoC branch with quad application cores and integrated graphics for broad embedded applications.

Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.

Discuss sourcing ↗Manufacturer reference ↗
Zynq UltraScale+ EG — technical selection diagram
Technical schematicFPGA.io technical schematic for Zynq UltraScale+ EG. Use the listed checks with the manufacturer documentation. This is an abstract diagram, not a product photograph, package drawing or pinout. Technical reference ↗
Product scopeChips & IP
Device references in this category2
Documented ordering codes10
Information checked2026-09-28

FROM FAMILY TO DEVICE

Chip models in Zynq UltraScale+ EG

Documented device references

Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.

Clear

2 device references

Browse the full AMD / Xilinx product map →

SELECTION CONTEXT

Working with Zynq UltraScale+ EG

Define the required function

The MPSoC branch with quad application cores and integrated graphics for broad embedded applications.

Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.

Check the integration boundary

Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.

Open the manufacturer reference ↗

ENGINEERING DECISIONS

What to confirm before selection

Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.

  1. Confirm graphics and display software requirements.
  2. Allocate DDR bandwidth across CPU, GPU, and PL traffic.

Move from family to full ordering number

Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.

Browse reviewed FPGA device data →

Preparing a complete board?

Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.

PCBA project preparation →

EVIDENCE & DEVELOPMENT

Documents for this product line

Start with the device table, then check electrical limits, ordering information and the applicable tool release.

AMD Zynq UltraScale+ MPSoCsCG / EG / EV Programmable Logic product tablesWeb ↗
More AMD / Xilinx development resources

AMD FPGA portfolio ↗

Compare FPGA architecture generations and find automotive, defense, and space-grade branches.

These broader manufacturer resources do not establish support or compatibility for every device on this page.

PRACTICAL QUESTIONS

Zynq UltraScale+ EG selection questions

How do I select a model within Zynq UltraScale+ EG?

Start with the documented product scope: The MPSoC branch with quad application cores and integrated graphics for broad embedded applications. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.

Is a base-device name enough to place an order?

A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.

Can the listed devices use the same PCB or development tools?

A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.

What should I include for sourcing or PCBA review?

Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.

PREPARE A USEFUL INQUIRY

Build your selection brief.

Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.

Open quotation form →

Sources & portfolio context

AMD / Xilinx Zynq UltraScale+ EG reference ↗

Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.

← Complete AMD / Xilinx product map

Related entries in this category

Zynq UltraScale+ CG 2 device refs · 4 ordering codes →Zynq UltraScale+ EV 2 device refs · 4 ordering codes →