BASE DEVICE
5AGXA1
Arria V GX base device.
- Logic elements
- 75 K LE
- M10K memory
- 8000 Kb
- Variable-precision DSP blocks
- 240 blocks
Altera / Chips & IP
Arria V — earlier generation
An earlier-generation mid-range family with GX, GT and GZ FPGA variants plus SX and ST Arm-based SoCs.
Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.
Product scopeChips & IP
Device references in this category2
Documented ordering codes11
Information checked2026-09-28
FROM FAMILY TO DEVICE
Chip models in Arria V — earlier generation
Documented device references
Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.
BASE DEVICE
5AGXB7
Arria V GX base device.
- Logic elements
- 504 K LE
- M10K memory
- 24140 Kb
- Variable-precision DSP blocks
- 1156 blocks
2 ordering codes5AGXFB7H4F35C4G →5AGXMB7G6F40C6G →
Specifications & documents →2 device references
No model matches this search. Clear the filter or send the exact part number for review.
Browse the full Altera product map →
SELECTION CONTEXT
Working with Arria V — earlier generation
Define the required function
An earlier-generation mid-range family with GX, GT and GZ FPGA variants plus SX and ST Arm-based SoCs.
Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.
Check the integration boundary
Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.
Open the manufacturer reference ↗ENGINEERING DECISIONS
What to confirm before selection
Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.
- Review the exact legacy device's lifecycle and tool availability.
- Match transceiver grade and HPS requirements before considering a replacement.
Move from family to full ordering number
Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.
Browse reviewed FPGA device data →Preparing a complete board?
Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.
PCBA project preparation →EVIDENCE & DEVELOPMENT
Documents for this product line
Start with the device table, then check electrical limits, ordering information and the applicable tool release.
Arria V — earlier generation — manufacturer referenceManufacturer product documentationPrimary source ↗Arria V FPGA and SoC Product TableResources tablePDF ↗
More Altera development resources
Altera FPGA documentation ↗
Device handbooks, data sheets, errata and development-kit guides.
Quartus Prime ↗
Edition selection, downloads and release-specific design resources.
Development kits and boards ↗
Official entry point for Altera kit families and partner offerings.
Altera community ↗
Technical discussion and product-support knowledge.
These broader manufacturer resources do not establish support or compatibility for every device on this page.
PRACTICAL QUESTIONS
Arria V — earlier generation selection questions
How do I select a model within Arria V — earlier generation?
Start with the documented product scope: An earlier-generation mid-range family with GX, GT and GZ FPGA variants plus SX and ST Arm-based SoCs. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.
Is a base-device name enough to place an order?
A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.
Can the listed devices use the same PCB or development tools?
A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.
What should I include for sourcing or PCBA review?
Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.
PREPARE A USEFUL INQUIRY
Build your selection brief.
Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.
Open quotation form →Sources & portfolio context
Altera Arria V — earlier generation reference ↗
Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.
← Complete Altera product map