Compare FPGA devices

No architecture-neutral logic-cell count is established. The vendor's nominal LUT4 quantity is retained with its precision and source in lut4_nominal, not converted into AMD logic cells.

Altera LE count is logic_elements; no conversion to AMD logic cells.

ECP5 uses LUT4 primitives. Wider logic functions can combine LUT4s, but that is not a source-defined native LUT6 count.

Cyclone IV uses four-input LUT LEs; no LUT6 equivalence.

Source reports embedded memory in kb (kilobits), excluding the separate Distributed RAM Bits row; each EBR is 18 kb.

Official embedded memory Kbits including parity capacity. 1 Kb=1024 bits; not bytes.

The generic field means 36 Kb blocks. ECP5 sysMEM EBR blocks are 18 Kb; sysmem_18kb_blocks retains their physical granularity. No artificial 36 Kb block count is supplied.

Existing field means 36 Kb blocks; M9K count is separate in

The generic application field denotes DSP slices. The directly printed native count is 18 x 18 multipliers, retained in embedded_18x18_multipliers; separately derived sysDSP slice/block counts retain their own native definitions.

Existing field means DSP slices. Native 18 x 18 embedded multipliers are separate.

Native Altera LE count, each with a four-input LUT and programmable register. Not AMD logic cells.

Manufacturer reports 12 k LUTs in Table 1.1, normalized as k x 1000 for the numeric field. Native primitive is LUT4 (p. 16). This is a nominal vendor figure, not a verified exact physical LUT count or an AMD logic-cell equivalent; do not use density code 12F as the count.

One 18 x 18 or two 9 x 9 multipliers per embedded multiplier block; not AMD DSP48 slices.

Directly printed multiplier count. One sysDSP slice supports two 18 x 18 multipliers (or four 9 x 9); one physical sysDSP block contains two slices (TN-02205-1.3 p. 6). This number is not a DSP-slice/block count and is not equivalent to AMD DSP48E1.

Official embedded-memory Kbits / 9 Kbits per M9K; includes parity capacity.

Native block granularity; keep separate from app's 36 Kb block field.

Derived as multiplier count / 2. A slice has two 18 x 18 multipliers; this is distinct from logic/PFU slices.

Derived as DS-02012 multiplier count / 4: two 18-bit multipliers per slice, two slices per block. A DSP block is not a DSP slice.

Separate from EBR capacity; do not add to bram without changing that field's definition.

Package-specific single-ended user I/O total, excluding dedicated SerDes channels. General-purpose I/O totals do not equal total package terminals.

User I/O includes general-purpose I/O, dedicated clock and dual-purpose configuration pins; excludes dedicated configuration pins. See Table 1-1 note 1.

The package-specific SerDes Channels/I/O Count cell gives exposed channels. Table 2.14 counts duals (two channels per dual); the pin-summary SerDes row counts pins, not channels.

High-speed serial transceivers are GX-only. E-family GPIO LVDS/SERDES pairs do not become hard serial channels.

MG285 is explicitly defined as 285-ball lead-free csfBGA. The full MPN is independently established by the literal ordering row.

FineLine BGA (FBGA); package-matrix code F256.

Actual ball count explicitly printed in the pin-summary table and selected literal ordering row, independently checked against the package-drawing title; not inferred from suffix digits.

Actual BGA terminal count.

Package body width x length, basic dimension (BSC), not PCB footprint/keep-out or height. Cross-checked against DS-02012 Table 1.1.

BGA package size from manufacturer matrix.

Nominal ball-to-ball pitch (BSC). Depopulated ball arrays still have this underlying pitch.

Ball pitch; source package-matrix pitch.

Manufacturer package pin count. BGA package: pin positions are physical balls.

Literal ordering-row grade. Grades describe timing bins within this family, not a single application fMAX or a cross-vendor speed ranking. ECP5-5G ordering rows in this revision list only -8.

Source speed grade; retain L because it distinguishes low-voltage grades. Not a universal Fmax.

Recommended operating junction temperature Tj. This is not ambient Ta, storage temperature, or the absolute maximum junction rating.

Automotive temperature grade recommended operating junction-temperature range (TJ), not ambient temperature. A suffix temperature range does not independently establish AEC-Q qualification or application suitability.

The grade is read from this exact literal full MPN's ordering row, then joined to its specified junction operating range.

Automotive temperature grade; temperature grade does not independently establish certification. I7 conditional extended operation is recorded separately.

Lattice names the core rail VCC; stored under app vccint only as a generic core-voltage field. This is the recommended core range, not SerDes VCCA, VCCIO, an absolute maximum, or a full board power-supply specification.

Nominal 1.20 V internal-logic supply for grade A7. Standard-voltage C6/C7/C8/I7/A7 grades supported at 1.2 V.

Application fMAX depends on implementation, path, loading, speed grade and operating conditions. No single application clock is established by the speed grade or PLL limit.

Application-specific timing not reviewed. Use implementation constraints and timing analysis.

Application power depends on design activity, resources, I/O, voltage and temperature; not determined from marketing/typical static-current figures.

Design activity, voltage and temperature dependent; no single device power asserted.

Recommended operating junction-temperature minimum.

Automotive temperature grade recommended operating junction-temperature range (TJ), not ambient temperature. A suffix temperature range does not independently establish AEC-Q qualification or application suitability.

Recommended operating junction-temperature maximum.

Automotive temperature grade recommended operating junction-temperature range (TJ), not ambient temperature. A suffix temperature range does not independently establish AEC-Q qualification or application suitability.

Tj is explicitly stated by the manufacturer; no ambient range is established.

TJ, not TA.

Grade A7, 1.2-V operation.

Grade A7, 1.2-V operation.

Grade A7, 1.2-V operation.

No current official MPN lifecycle status was established. An ordering-table entry or live family webpage is not an Active-status statement.

Exact-MPN ordering-table presence does not establish lifecycle status.

No current stock/inventory evidence was obtained. The official ordering-table entry does not establish availability.

No stock observation; manufacturer order code is not inventory availability.