TDK InvenSense / TECHNICAL REFERENCE

ICM-42688-P

Six-axis MEMS motion device combining a gyroscope and accelerometer.

FPGA.io Part Number FIO-9F34B942AAF49892Internal catalogue reference · manufacturer MPN remains unchanged

Technical reference · Base device — ordering suffix not specified · Checked 2026-09-28

Request sourcing review ↗View documented parameters ↓

ICM-42688-P — technical feature overview — Technical schematicFPGA.io technical schematic for ICM-42688-P. Values summarize the documented fields below; consult their source conditions. This is an abstract diagram, not a product photograph, package drawing or pinout. Parameter sources below ↓

DOCUMENTED FACTS

Technical parameters

4 source-linked fields

Values apply to the device and conditions identified in each source. Family maxima, package limits and full ordering-code specifications must not be treated as interchangeable.

Parameter	Documented value	Source & conditions
Motion axes	6	ICM-42688-P datasheet ↗Section 1.2 Product overview
Supply	1.71 to 3.6 V	ICM-42688-P datasheet ↗Section 1.2 Product overview
Interfaces	I3C, I2C and SPI	ICM-42688-P datasheet ↗Section 1.2 Product overview
FIFO	2 Kbytes	ICM-42688-P datasheet ↗Section 1.2 Product overview

Official documents

ICM-42688-P datasheetSection 1.2 Product overviewPDF ↗

Ordering and board constraints

This reference identifies a base device. Package, speed grade, temperature, qualification and packing suffixes have not been inferred.

Verify the exact package, grade and ordering suffix before design-in.
Confirm current availability and lifecycle for the complete code before procurement.
Review pinout, electrical conditions and the exact document revision before PCB release.

Prepare a complete request

Include the full ordering code, quantity, delivery requirement and traceability needs. For an assembled board, include BOM revision, programming and test scope.

Request this device ↗

Discuss sourcing + PCBA →

Series & categories

MEMS inertial sensors →motion tracking →

COMPLETE PART IDENTITIES

Ordering numbers for ICM-42688-P

0 documented codes

These references belong to this device. Evidence labels distinguish reviewed specifications, public listings and manufacturer coding examples. Counts describe this site’s documented coverage, not stock or all configurations offered by the manufacturer.

Exact ordering code requires confirmation

The cited public material did not establish a literal complete ordering row in this pass. This is an evidence limit, not a claim that no code exists. The existing device identity is retained; no suffix combinations, neighboring chips, boards or systems are substituted.

Ordering identity reference ↗

Request an exact-code review →