FPGA DEVICES · ENGINEERING · SOURCING Source-linked information. Clear project requirements.

Sensirion / TECHNICAL REFERENCE

SLF3S-1300F

Assembled liquid-flow sensor with fluidic fittings and an internal CMOSens chip.

FPGA.io Part Number FIO-59387E2E75D9BCCEInternal catalogue reference · manufacturer MPN remains unchanged

Technical reference · Assembled sensor module · Checked 2026-09-28

SLF3S-1300F — technical feature overview
Technical schematicFPGA.io technical schematic for SLF3S-1300F. Values summarize the documented fields below; consult their source conditions. This is an abstract diagram, not a product photograph, package drawing or pinout. Parameter sources below ↓

DOCUMENTED FACTS

Technical parameters

6 source-linked fields

Values apply to the device and conditions identified in each source. Family maxima, package limits and full ordering-code specifications must not be treated as interchangeable.

ParameterDocumented valueSource & conditions
Product constructionAssembled liquid-flow sensor incorporating a CMOSens sensor chip and a 6-pin electrical connectorSensirion SLF3S-1300F Liquid Flow Sensor ↗Version 1.1, p.1 Product Summary
Bidirectional flow rangeUp to ±40 ml/minSensirion SLF3S-1300F Liquid Flow Sensor ↗Version 1.1, p.1 Product Summary
Calibration mediaWater and isopropyl alcohol (IPA)Sensirion SLF3S-1300F Liquid Flow Sensor ↗Version 1.1, p.1 Product Summary
Response timeBelow 20 msSensirion SLF3S-1300F Liquid Flow Sensor ↗Version 1.1, p.1 Product Summary
Sensor interfaceI²C via 6-pin connectorSensirion SLF3S-1300F Liquid Flow Sensor ↗Version 1.1, p.1 Product Summary
Assembly dimensions48 × 15.5 × 8.9 mmSensirion SLF3S-1300F product catalog ↗Specification / Generic / Size

Official documents

Sensirion SLF3S-1300F Liquid Flow SensorVersion 1.1, p.1 Product SummaryPDF ↗Sensirion SLF3S-1300F product catalogSpecification / Liquid flow / GenericWeb ↗

Ordering and board constraints

This reference identifies an assembled sensor module. Check its connectors, mechanical and fluidic interfaces, calibration, supply and operating medium before system integration.

  • This is a sensor assembly, not the bare internal CMOSens chip. The listed flow, interface and dimensional specifications apply to the assembly.
  • Confirm current availability and lifecycle for the complete code before procurement.
  • Review pinout, electrical conditions and the exact document revision before PCB release.

Prepare a complete request

Include the full ordering code, quantity, delivery requirement and traceability needs. For an assembled board, include BOM revision, programming and test scope.

Request this device ↗

Discuss sourcing + PCBA →

Series & categories

COMPLETE PART IDENTITIES

Ordering numbers for SLF3S-1300F

0 documented codes

These references belong to this device. Evidence labels distinguish reviewed specifications, public listings and manufacturer coding examples. Counts describe this site’s documented coverage, not stock or all configurations offered by the manufacturer.

Exact ordering code requires confirmation

No complete ordering code established from the reviewed public source in this pass. Access restrictions, family-only pages and missing ordering tables remain explicit gaps; no suffix combination was generated.

Ordering identity reference ↗

Ordering identity reference ↗

Request an exact-code review →

Related evidence and next tasks

Continue the task with the relevant source scope. These reading paths do not establish interchangeability or current supply.

Read a device reference at its actual evidence scope
Open the animated walkthrough (close to hide motion)Animated workflow: IDENTITY: Literal source code; DOCUMENT: Version + table; SCOPE: Known / unknown; REVIEW: Exact-code checks

Read a device reference at its actual evidence scope · Base-device facts, exact ordering identity and a current supply offer are separate evidence.

  1. IDENTITY: Literal source code
  2. DOCUMENT: Version + table
  3. SCOPE: Known / unknown
  4. REVIEW: Exact-code checks

Original conceptual teaching visual. Not a product photograph, schematic, pinout, footprint or measured result. The static poster is used when reduced motion is requested.