FPGA DEVICES · ENGINEERING · SOURCING Source-linked information. Clear project requirements.

Sensirion / TECHNICAL REFERENCE

SHT40-AD1F

Humidity and temperature sensor IC with a protective membrane.

FPGA.io Part Number FIO-487646DBEEBD4B66Internal catalogue reference · manufacturer MPN remains unchanged

Technical reference · Base device — ordering suffix not specified · Checked 2026-09-28

SHT40-AD1F — technical feature overview
Technical schematicFPGA.io technical schematic for SHT40-AD1F. Values summarize the documented fields below; consult their source conditions. This is an abstract diagram, not a product photograph, package drawing or pinout. Parameter sources below ↓

DOCUMENTED FACTS

Technical parameters

5 source-linked fields

Values apply to the device and conditions identified in each source. Family maxima, package limits and full ordering-code specifications must not be treated as interchangeable.

ParameterDocumented valueSource & conditions
Typical humidity accuracy±1.8 %RHSHT40-AD1F official reference ↗Product specification
Typical temperature accuracy±0.2 °CSHT40-AD1F official reference ↗Product specification
Supply voltage1.08–3.6 VSHT40-AD1F official reference ↗Product specification
Interface / addressI²C / 0x44SHT40-AD1F official reference ↗Product specification
Humidity operating range0–100 %RHSHT40-AD1F official reference ↗Product specification

Official documents

SHT40-AD1F official referenceProduct specificationWeb ↗

Ordering and board constraints

This reference identifies a base device. Package, speed grade, temperature, qualification and packing suffixes have not been inferred.

  • Check the exact package, revision and electrical operating conditions.
  • Review board layout and driver requirements before design-in.
  • Confirm current availability and lifecycle for the complete code before procurement.
  • Review pinout, electrical conditions and the exact document revision before PCB release.

Prepare a complete request

Include the full ordering code, quantity, delivery requirement and traceability needs. For an assembled board, include BOM revision, programming and test scope.

Request this device ↗

Discuss sourcing + PCBA →

Series & categories

COMPLETE PART IDENTITIES

Ordering numbers for SHT40-AD1F

0 documented codes

These references belong to this device. Evidence labels distinguish reviewed specifications, public listings and manufacturer coding examples. Counts describe this site’s documented coverage, not stock or all configurations offered by the manufacturer.

Exact ordering code requires confirmation

No complete ordering code established from the reviewed public source in this pass. Access restrictions, family-only pages and missing ordering tables remain explicit gaps; no suffix combination was generated.

Ordering identity reference ↗

Request an exact-code review →

Related evidence and next tasks

Continue the task with the relevant source scope. These reading paths do not establish interchangeability or current supply.

Read a device reference at its actual evidence scope
Open the animated walkthrough (close to hide motion)Animated workflow: IDENTITY: Literal source code; DOCUMENT: Version + table; SCOPE: Known / unknown; REVIEW: Exact-code checks

Read a device reference at its actual evidence scope · Base-device facts, exact ordering identity and a current supply offer are separate evidence.

  1. IDENTITY: Literal source code
  2. DOCUMENT: Version + table
  3. SCOPE: Known / unknown
  4. REVIEW: Exact-code checks

Original conceptual teaching visual. Not a product photograph, schematic, pinout, footprint or measured result. The static poster is used when reduced motion is requested.