FPGA DEVICES · ENGINEERING · SOURCING Source-linked information. Clear project requirements.

Renesas Electronics / TECHNICAL REFERENCE

8A34001

ClockMatrix timing IC for jitter attenuation and synchronization; the official Renesas page now notes SiTime ownership.

FPGA.io Part Number FIO-24F303DC454D72AEInternal catalogue reference · manufacturer MPN remains unchanged

Technical reference · Base device — ordering suffix not specified · Checked 2026-09-28

8A34001 — technical feature overview
Technical schematicFPGA.io technical schematic for 8A34001. Values summarize the documented fields below; consult their source conditions. This is an abstract diagram, not a product photograph, package drawing or pinout. Parameter sources below ↓

DOCUMENTED FACTS

Technical parameters

5 source-linked fields

Values apply to the device and conditions identified in each source. Family maxima, package limits and full ordering-code specifications must not be treated as interchangeable.

ParameterDocumented valueSource & conditions
Timing channels88A34001 official reference ↗Product attributes / Features
Clock outputs12 differential or 24 LVCMOS8A34001 official reference ↗Product attributes / Features
Clock-input frequency0.5 Hz–1 GHz8A34001 official reference ↗Product attributes / Features
Control interfacesI²C up to 1 MHz; SPI up to 50 MHz8A34001 official reference ↗Product attributes / Features
Package144-ball CABGA, 10 × 10 mm8A34001 official reference ↗Product attributes / Features

Official documents

8A34001 official referenceProduct attributes / FeaturesWeb ↗

Ordering and board constraints

This reference identifies a base device. Package, speed grade, temperature, qualification and packing suffixes have not been inferred.

  • Check the complete orderable part, package and temperature grade.
  • Review electrical limits and the current datasheet before design-in.
  • Confirm current availability and lifecycle for the complete code before procurement.
  • Review pinout, electrical conditions and the exact document revision before PCB release.

Prepare a complete request

Include the full ordering code, quantity, delivery requirement and traceability needs. For an assembled board, include BOM revision, programming and test scope.

Request this device ↗

Discuss sourcing + PCBA →

Series & categories

COMPLETE PART IDENTITIES

Ordering numbers for 8A34001

1 documented code

These references belong to this device. Evidence labels distinguish reviewed specifications, public listings and manufacturer coding examples. Counts describe this site’s documented coverage, not stock or all configurations offered by the manufacturer.

Full ordering numberPackageSpeed / temperatureEvidenceNext step
8A34001E-000AJGCABGANot verified-40 to 85 °CManufacturer-listed codeView source ↗Device details →Request quotation

1 of 1 codes shown

Not verified means that parameter has not been independently established for this exact code. A code example is not confirmation that a configuration can be ordered today.

Related evidence and next tasks

Continue the task with the relevant source scope. These reading paths do not establish interchangeability or current supply.

Read a device reference at its actual evidence scope
Open the animated walkthrough (close to hide motion)Animated workflow: IDENTITY: Literal source code; DOCUMENT: Version + table; SCOPE: Known / unknown; REVIEW: Exact-code checks

Read a device reference at its actual evidence scope · Base-device facts, exact ordering identity and a current supply offer are separate evidence.

  1. IDENTITY: Literal source code
  2. DOCUMENT: Version + table
  3. SCOPE: Known / unknown
  4. REVIEW: Exact-code checks

Original conceptual teaching visual. Not a product photograph, schematic, pinout, footprint or measured result. The static poster is used when reduced motion is requested.