FPGA DEVICES · ENGINEERING · SOURCING Source-linked information. Clear project requirements.

Samsung Semiconductor / Chips & IP

HBM

HBM is a product-line reference within Samsung Semiconductor. Use the manufacturer source to confirm the exact device or deliverable and its current support status.

Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.

HBM — technical product-family map
Technical schematicFPGA.io technical schematic for HBM. Product branches are shown as a navigation overview. This is an abstract diagram, not a product photograph, package drawing or pinout. Technical reference ↗
Product scopeChips & IP
Device references in this category1
Documented ordering codes1
Information checked2026-09-28

This category map is being expanded. Linked device examples have individual sources; they do not represent the complete manufacturer catalogue.

FROM FAMILY TO DEVICE

Chip models in HBM

Documented device references

Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.

ORDERING REFERENCE

KHAA84901B-MC16

Historical reference for the exact Samsung KHAA84901B-MC16 HBM2E Flashbolt part number. Specifications come from the indexed official product page; its live URL now redirects to the HBM overview. Reconfirm against a stable device datasheet before design-in.

Capacity
16 GB
Data rate
3.2 Gbps
Package
MPGA
1 ordering codeKHAA84901B-MC16 →
Specifications & documents →

1 device reference

WITHIN THIS PRODUCT LINE

Series & subcategories

Product lines

HBM4E

HBM4E is a named Samsung high-bandwidth-memory generation; availability depends on the exact stack and customer qualification.

0 device refs · 0 ordering codesExplore HBM4E →
Product lines

HBM4

HBM4 is a named Samsung high-bandwidth-memory generation; availability depends on the exact stack and customer qualification.

0 device refs · 0 ordering codesExplore HBM4 →
Product lines

HBM3E

HBM3E is a named Samsung high-bandwidth-memory generation; availability depends on the exact stack and customer qualification.

0 device refs · 0 ordering codesExplore HBM3E →

SELECTION CONTEXT

Working with HBM

Define the required function

HBM is a product-line reference within Samsung Semiconductor. Use the manufacturer source to confirm the exact device or deliverable and its current support status.

Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.

Check the integration boundary

Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.

Open the manufacturer reference ↗

ENGINEERING DECISIONS

What to confirm before selection

Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.

  1. Confirm the memory technology, interface/protocol, capacity, organization and voltage against the controller.
  2. Review temperature grade, endurance/retention where applicable, package footprint and lifecycle notices.
  3. Select the instruction set, operating-system/BSP support, boot flow and memory interface for the target application.
  4. Check thermal design, power rails, high-speed layout constraints and production availability at the exact processor level.
  5. Match measurement range, noise/resolution, calibration, interface and operating environment.

Move from family to full ordering number

Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.

Send the exact project requirement →

Preparing a complete board?

Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.

PCBA project preparation →

EVIDENCE & DEVELOPMENT

Documents for this product line

Start with the device table, then check electrical limits, ordering information and the applicable tool release.

More Samsung Semiconductor development resources

These broader manufacturer resources do not establish support or compatibility for every device on this page.

PRACTICAL QUESTIONS

HBM selection questions

How do I select a model within HBM?

Start with the documented product scope: HBM is a product-line reference within Samsung Semiconductor. Use the manufacturer source to confirm the exact device or deliverable and its current support status. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.

Is a base-device name enough to place an order?

A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.

Can the listed devices use the same PCB or development tools?

A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.

What should I include for sourcing or PCBA review?

Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.

PREPARE A USEFUL INQUIRY

Build your selection brief.

Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.

Open quotation form →

Sources & portfolio context

Samsung Semiconductor HBM reference ↗

Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.

← Complete Samsung Semiconductor product map

Related entries in this category