FPGA DEVICES · ENGINEERING · SOURCING Source-linked information. Clear project requirements.

SIDE-BY-SIDE REVIEW

Compare FPGA devices

Review resource differences, package constraints and the fields that still need confirmation.

Select devices (2–4)
Reviewed full part numbers

Showing up to 40 search results plus your selected devices. Search the full catalogue above to find another MPN.

Quote these devices ↗
Parameter / statusXC7Z045-3FFG900EZynq-7000 SoCXC7Z045-1FFG900IZynq-7000 SoC
Logic cellsSame350000 logic cellsDS190Z045 ↗ · devicep3 Table1 XC7Z045 Logic Cells row
Conditions

Rounded vendor figure 350K, not a LUT count.

350000 logic cellsDS190Z045 ↗ · devicep3 Table1 XC7Z045 Logic Cells row
Conditions

Rounded vendor figure 350K, not a LUT count.

6-input LUTsSame218600 LUT6DS190Z045 ↗ · devicep3 Table1 XC7Z045 Look-Up Tables row218600 LUT6DS190Z045 ↗ · devicep3 Table1 XC7Z045 Look-Up Tables row
Block RAM capacitySame19620 KbDS190Z045 ↗ · derivedp3 Table1 XC7Z045 545 × 36 Kb blocks
Conditions

Derived 545 × 36 = 19620 Kb; vendor headline is rounded 19.2 Mb. Not bytes; ports, width/depth geometry, parity/ECC and mapping overhead remain separate.

19620 KbDS190Z045 ↗ · derivedp3 Table1 XC7Z045 545 × 36 Kb blocks
Conditions

Derived 545 × 36 = 19620 Kb; vendor headline is rounded 19.2 Mb. Not bytes; ports, width/depth geometry, parity/ECC and mapping overhead remain separate.

36 Kb block RAM blocksSame545 blocksDS190Z045 ↗ · devicep3 Table1 XC7Z045 Block RAM row
Conditions

Each source block is 36 Kb.

545 blocksDS190Z045 ↗ · devicep3 Table1 XC7Z045 Block RAM row
Conditions

Each source block is 36 Kb.

DSP slicesSame900 DSP48E1DS190Z045 ↗ · devicep3 Table1 XC7Z045 DSP Slices row; DS191 p58 Table70 DSP48E1 architecture cross-check
Conditions

900 slices; count does not establish application throughput.

900 DSP48E1DS190Z045 ↗ · devicep3 Table1 XC7Z045 DSP Slices row; DS191 p58 Table70 DSP48E1 architecture cross-check
Conditions

900 slices; count does not establish application throughput.

User I/O in this packageSame362 I/OUG865Z045 ↗ · device-packagep11 Table1-4 XC7Z045 / FFG900
Conditions

PL SelectIO only: 212 HR + 150 HP. Separate 128 PS I/O are not interchangeable PL pins. Differential counts are alternate uses, not additive.

362 I/OUG865Z045 ↗ · device-packagep11 Table1-4 XC7Z045 / FFG900
Conditions

PL SelectIO only: 212 HR + 150 HP. Separate 128 PS I/O are not interchangeable PL pins. Differential counts are alternate uses, not additive.

Serial transceivers in this packageSame16 GTX channelsUG865Z045 ↗ · device-packagep10 Table1-3 XC7Z045 / FFG900
Conditions

16 exposed GTX channels; neither a family maximum nor a protocol qualification.

16 GTX channelsUG865Z045 ↗ · device-packagep10 Table1-3 XC7Z045 / FFG900
Conditions

16 exposed GTX channels; neither a family maximum nor a protocol qualification.

Package codeSameFFG900XCN20011Z045 ↗ · MPNp4 Table6 exact XC7Z045-3FFG900E, right Replacement Part column
Conditions

Historical replacement code, not the affected V package code.

FFG900XCN20011Z045 ↗ · MPNp4 Table6 exact XC7Z045-1FFG900I, right Replacement Part column
Conditions

Historical replacement code, not the affected V package code.

Package ball countSame900 ballsPINSZ045900 ↗ · packageHeader xc7z045ffg900; 900 distinct physical package-pin rows
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

900 ballsPINSZ045900 ↗ · packageHeader xc7z045ffg900; 900 distinct physical package-pin rows
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

Package bodySame31 × 31 mmUG865Z045 ↗ · packagepp89–90 Figures4-13/4-14 FFG900, D and E
Conditions

Package body only, excluding PCB courtyard. For FFG900, cited lid variants share this body size; no lid variant is inferred for a supplied lot.

31 × 31 mmUG865Z045 ↗ · packagepp89–90 Figures4-13/4-14 FFG900, D and E
Conditions

Package body only, excluding PCB courtyard. For FFG900, cited lid variants share this body size; no lid variant is inferred for a supplied lot.

Ball pitchSame1 mmUG865Z045 ↗ · packagepp89–90 Figures4-13/4-14, e
Conditions

Nominal ball pitch. A body drawing is not a fabrication-ready land pattern.

1 mmUG865Z045 ↗ · packagepp89–90 Figures4-13/4-14, e
Conditions

Nominal ball pitch. A body drawing is not a fabrication-ready land pattern.

Package terminals / leads (vendor count)Same900 pinsPINSZ045900 ↗ · packageHeader xc7z045ffg900; 900 distinct physical package-pin rows
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

900 pinsPINSZ045900 ↗ · packageHeader xc7z045ffg900; 900 distinct physical package-pin rows
Conditions

Physical balls include power, ground and dedicated pins, not only user I/O. Cross-check UG865 p27 device/package link.

Speed gradeDifferent-3XCN20011Z045 ↗ · MPNp4 Table6 exact literal XC7Z045-3FFG900E
Conditions

DS190 p23 Table7 cross-checks permitted grade combinations. Not a single application clock rating.

-1XCN20011Z045 ↗ · MPNp4 Table6 exact literal XC7Z045-1FFG900I
Conditions

DS190 p23 Table7 cross-checks permitted grade combinations. Not a single application clock rating.

Junction temperature (Tj)Different0 to +100 °CDS191Z045 ↗ · gradep4 Table2 Tj E row
Conditions

Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.

−40 to +100 °CDS191Z045 ↗ · gradep4 Table2 Tj I row
Conditions

Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.

Temperature gradeDifferentExtended (E)DS190Z045 ↗ · MPNp23 Table7 XC7Z045 group and Figure4; exact letter in XCN20011 p4Industrial (I)DS190Z045 ↗ · MPNp23 Table7 XC7Z045 group and Figure4; exact letter in XCN20011 p4
Core voltage conditionsSame0.97 to 1.03 VDS191Z045 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.

0.97 to 1.03 VDS191Z045 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.

Maximum application clockUnconfirmed dataNot confirmed
Conditions

Design-specific timing not established.

Not confirmed
Conditions

Design-specific timing not established.

Application powerUnconfirmed dataNot confirmed
Conditions

Workload, implementation and thermal analysis required.

Not confirmed
Conditions

Workload, implementation and thermal analysis required.

Minimum junction temperatureDifferent0 °CDS191Z045 ↗ · gradep4 Table2 Tj E row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

-40 °CDS191Z045 ↗ · gradep4 Table2 Tj I row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

Maximum junction temperatureSame100 °CDS191Z045 ↗ · gradep4 Table2 Tj E row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

100 °CDS191Z045 ↗ · gradep4 Table2 Tj I row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

Temperature referenceSameJunction temperature (Tj)DS191Z045 ↗ · gradep4 Table2 Tj rowsJunction temperature (Tj)DS191Z045 ↗ · gradep4 Table2 Tj rows
Conditional temperature operationSameRecommended operating Tj rangeDS191Z045 ↗ · gradep4 Table2 Tj E row
Conditions

DS191 Table2 and applicable notes. No extended or over-temperature qualification is asserted.

Recommended operating Tj rangeDS191Z045 ↗ · gradep4 Table2 Tj I row
Conditions

DS191 Table2 and applicable notes. No extended or over-temperature qualification is asserted.

Minimum core voltageSame0.97 VDS191Z045 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

0.97 VDS191Z045 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Nominal core voltageSame1 VDS191Z045 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

1 VDS191Z045 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Maximum core voltageSame1.03 VDS191Z045 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

1.03 VDS191Z045 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Current lifecycleUnconfirmed dataNot confirmedXCN20011Z045 ↗ · supplyp4 Table6 replacement-part columns
Conditions

Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Not confirmedXCN20011Z045 ↗ · supplyp4 Table6 replacement-part columns
Conditions

Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Available stockUnconfirmed dataNot confirmed
Conditions

Current inventory, USD price and lead time are not verified. Request a quotation for the full ordering code.

Not confirmed
Conditions

Current inventory, USD price and lead time are not verified. Request a quotation for the full ordering code.

Comparison is not replacement approval.

Check pinout, bank voltages, configuration, tool support, timing, thermal design and lifecycle before changing a part. Different vendors’ logic and DSP counts need architecture-specific interpretation.

Keep the differences with your decision

Export the selected public MPNs and key evidence states. This is a planning snapshot, not engineering approval; the full source conditions remain on each device page.