FPGA DEVICES · ENGINEERING · SOURCING Source-linked information. Clear project requirements.

SIDE-BY-SIDE REVIEW

Compare FPGA devices

Review resource differences, package constraints and the fields that still need confirmation.

Select devices (2–4)
Reviewed full part numbers

Showing up to 40 search results plus your selected devices. Search the full catalogue above to find another MPN.

Quote these devices ↗
Parameter / statusXC7Z030-2FBG676IZynq-7000 SoCXC7Z030-2FBG676EZynq-7000 SoC
Logic cellsSame125000 logic cellsDS190 ↗ · devicep3 Table1, XC7Z030 Logic Cells row
Conditions

Source reports the rounded vendor figure 125K. This is not a LUT count.

125000 logic cellsDS190 ↗ · devicep3 Table1, XC7Z030 Logic Cells row
Conditions

Source reports the rounded vendor figure 125K. This is not a LUT count.

6-input LUTsSame78600 LUT6DS190 ↗ · devicep3 Table1, XC7Z030 Look-Up Tables row78600 LUT6DS190 ↗ · devicep3 Table1, XC7Z030 Look-Up Tables row
Block RAM capacitySame9540 KbDS190 ↗ · derivedp3 Table1, XC7Z030 265 × 36 Kb blocks
Conditions

Derived capacity 265 × 36 = 9540 Kb; vendor headline is rounded 9.3 Mb. Not bytes; port geometry, parity/ECC and implementation overhead remain separate.

9540 KbDS190 ↗ · derivedp3 Table1, XC7Z030 265 × 36 Kb blocks
Conditions

Derived capacity 265 × 36 = 9540 Kb; vendor headline is rounded 9.3 Mb. Not bytes; port geometry, parity/ECC and implementation overhead remain separate.

36 Kb block RAM blocksSame265 blocksDS190 ↗ · devicep3 Table1, XC7Z030 Block RAM row
Conditions

Each source block is 36 Kb.

265 blocksDS190 ↗ · devicep3 Table1, XC7Z030 Block RAM row
Conditions

Each source block is 36 Kb.

DSP slicesSame400 DSP48E1DS190 ↗ · devicep3 Table1, XC7Z030 DSP Slices (18 × 25 MACCs); architecture cross-check DS191 p58 Table70
Conditions

400 slices; DS191 Table70 identifies DSP48E1. Count does not establish design throughput.

400 DSP48E1DS190 ↗ · devicep3 Table1, XC7Z030 DSP Slices (18 × 25 MACCs); architecture cross-check DS191 p58 Table70
Conditions

400 slices; DS191 Table70 identifies DSP48E1. Count does not establish design throughput.

User I/O in this packageSame250 I/OUG865 ↗ · device-packagep11 Table1-4, XC7Z030 / FBG676
Conditions

PL SelectIO only: 100 HR + 150 HP. Separate 128 PS I/O are not interchangeable PL pins. Differential counts are alternate uses, not additive.

250 I/OUG865 ↗ · device-packagep11 Table1-4, XC7Z030 / FBG676
Conditions

PL SelectIO only: 100 HR + 150 HP. Separate 128 PS I/O are not interchangeable PL pins. Differential counts are alternate uses, not additive.

Serial transceivers in this packageSame4 GTX channelsUG865 ↗ · device-packagep10 Table1-3, XC7Z030 / FBG676
Conditions

Four exposed GTX channels; not a family-maximum substitution or protocol qualification.

4 GTX channelsUG865 ↗ · device-packagep10 Table1-3, XC7Z030 / FBG676
Conditions

Four exposed GTX channels; not a family-maximum substitution or protocol qualification.

Package codeSameFBG676XCN20011 ↗ · MPNp4 Table6 exact XC7Z030-2FBG676I in replacement-part column
Conditions

Historical replacement code, not the affected package code.

FBG676XCN20011 ↗ · MPNp4 Table6 exact XC7Z030-2FBG676E in replacement-part column
Conditions

Historical replacement code, not the affected package code.

Package ball countSame676 ballsPINS676 ↗ · packageHeader xc7z030fbg676; 676 distinct package-pin rows
Conditions

Cross-check UG865 package pinout link p27. Ball count does not imply I/O count.

676 ballsPINS676 ↗ · packageHeader xc7z030fbg676; 676 distinct package-pin rows
Conditions

Cross-check UG865 package pinout link p27. Ball count does not imply I/O count.

Package bodySame27 × 27 mmUG865 ↗ · packagep84 Figure4-8, D and E body dimensions
Conditions

Body only, excluding PCB courtyard.

27 × 27 mmUG865 ↗ · packagep84 Figure4-8, D and E body dimensions
Conditions

Body only, excluding PCB courtyard.

Ball pitchSame1 mmUG865 ↗ · packagep84 Figure4-8, e1 mmUG865 ↗ · packagep84 Figure4-8, e
Package terminals / leads (vendor count)Same676 pinsPINS676 ↗ · packageHeader xc7z030fbg676; 676 distinct package-pin rows
Conditions

Physical package balls counted in the official device/package pin file; includes power, ground and dedicated pins, not only user I/O.

676 pinsPINS676 ↗ · packageHeader xc7z030fbg676; 676 distinct package-pin rows
Conditions

Physical package balls counted in the official device/package pin file; includes power, ground and dedicated pins, not only user I/O.

Speed gradeSame-2XCN20011 ↗ · MPNp4 Table6 exact literal XC7Z030-2FBG676I
Conditions

DS190 p23 Table7 cross-checks permitted grade combinations. Not a single application clock rating.

-2XCN20011 ↗ · MPNp4 Table6 exact literal XC7Z030-2FBG676E
Conditions

DS190 p23 Table7 cross-checks permitted grade combinations. Not a single application clock rating.

Junction temperature (Tj)Different−40 to +100 °CDS191 ↗ · gradep4 Table2 Tj I row
Conditions

Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.

0 to +100 °CDS191 ↗ · gradep4 Table2 Tj E row
Conditions

Junction temperature, not ambient. Match grade letter to DS190 p23 Figure4 and the exact XCN20011 ordering code.

Temperature gradeDifferentIndustrial (I)DS190 ↗ · MPNp23 Table7 XC7Z030 group and Figure4; exact letter in XCN20011 p4Extended (E)DS190 ↗ · MPNp23 Table7 XC7Z030 group and Figure4; exact letter in XCN20011 p4
Core voltage conditionsSame0.97 to 1.03 VDS191 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.

0.97 to 1.03 VDS191 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL core supply, nominal 1.00 V. Do not treat as all rails. Note6 requires VCCINT and VCCBRAM connected to the same supply. PS VCCPINT has separate limits including p4 note3 CPU/DDR conditions.

Maximum application clockUnconfirmed dataNot confirmed
Conditions

Design-specific timing not established.

Not confirmed
Conditions

Design-specific timing not established.

Application powerUnconfirmed dataNot confirmed
Conditions

Workload, implementation and thermal analysis required.

Not confirmed
Conditions

Workload, implementation and thermal analysis required.

Minimum junction temperatureDifferent-40 °CDS191 ↗ · gradep4 Table2 Tj I row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

0 °CDS191 ↗ · gradep4 Table2 Tj E row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

Maximum junction temperatureSame100 °CDS191 ↗ · gradep4 Table2 Tj I row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

100 °CDS191 ↗ · gradep4 Table2 Tj E row
Conditions

Recommended junction-temperature bound for this exact grade; not ambient temperature.

Temperature referenceSameJunction temperature (Tj)DS191 ↗ · gradep4 Table2 Tj rowsJunction temperature (Tj)DS191 ↗ · gradep4 Table2 Tj rows
Conditional temperature operationSameRecommended operating Tj rangeDS191 ↗ · gradep4 Table2 Tj I row
Conditions

DS191 Table2 and applicable notes. No extended or over-temperature qualification is asserted.

Recommended operating Tj rangeDS191 ↗ · gradep4 Table2 Tj E row
Conditions

DS191 Table2 and applicable notes. No extended or over-temperature qualification is asserted.

Minimum core voltageSame0.97 VDS191 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

0.97 VDS191 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Nominal core voltageSame1 VDS191 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

1 VDS191 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Maximum core voltageSame1.03 VDS191 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

1.03 VDS191 ↗ · gradep3 Table2 VCCINT for -3/-2/-1
Conditions

PL VCCINT only for this -1/-2/-3 speed option. Do not reuse for all PS, DDR or I/O rails; DS191 Table2 and notes govern each rail.

Current lifecycleUnconfirmed dataNot confirmedXCN20011 ↗ · supplyp4 Table6 replacement-part columns
Conditions

Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Not confirmedXCN20011 ↗ · supplyp4 Table6 replacement-part columns
Conditions

Literal historical replacement recommendation only. Do not inherit the affected V-code discontinuation event. Current lifecycle, lot compliance, stock, price and lead time require manufacturer/supply confirmation.

Available stockUnconfirmed dataNot confirmed
Conditions

Current inventory, USD price and lead time are not verified. Request a quotation for the full ordering code.

Not confirmed
Conditions

Current inventory, USD price and lead time are not verified. Request a quotation for the full ordering code.

Comparison is not replacement approval.

Check pinout, bank voltages, configuration, tool support, timing, thermal design and lifecycle before changing a part. Different vendors’ logic and DSP counts need architecture-specific interpretation.

Keep the differences with your decision

Export the selected public MPNs and key evidence states. This is a planning snapshot, not engineering approval; the full source conditions remain on each device page.