BASE DEVICE
AM625
Sitara application processor for Linux-capable embedded HMI designs.
- Application CPU
- Up to 4 Arm Cortex-A53 cores
- Maximum Cortex-A53 clock
- 1.4 GHz
- MCU subsystem
- Arm Cortex-M4F, up to 400 MHz
Texas Instruments / Chips & IP
Microprocessors and DSPs
Embedded processing for applications needing richer software or signal processing.
Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.
Product scopeChips & IP
Device references in this category1
Documented ordering codes24
Information checked2026-09-28
FROM FAMILY TO DEVICE
Chip models in Microprocessors and DSPs
Documented device references
Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.
1 device reference
No model matches this search. Clear the filter or send the exact part number for review.
Browse the full Texas Instruments product map →
WITHIN THIS PRODUCT LINE
Series & subcategories
Sitara AM6x
Sitara AM6x is a named TI processor or DSP line used in embedded systems.
0 device refs · 0 ordering codesExplore Sitara AM6x →Jacinto TDA4x
Jacinto TDA4x is a named TI processor or DSP line used in embedded systems.
0 device refs · 0 ordering codesExplore Jacinto TDA4x →C7x DSP
C7x DSP is a named TI processor or DSP line used in embedded systems.
0 device refs · 0 ordering codesExplore C7x DSP →SELECTION CONTEXT
Working with Microprocessors and DSPs
Define the required function
Embedded processing for applications needing richer software or signal processing.
Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.
Check the integration boundary
Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.
Open the manufacturer reference ↗ENGINEERING DECISIONS
What to confirm before selection
Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.
- Check external-memory and boot requirements.
- Verify OS support, peripherals and accelerator tooling.
Move from family to full ordering number
Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.
Send the exact project requirement →Preparing a complete board?
Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.
PCBA project preparation →EVIDENCE & DEVELOPMENT
Documents for this product line
Start with the device table, then check electrical limits, ordering information and the applicable tool release.
Microprocessors and DSPs — manufacturer referenceManufacturer product documentationPrimary source ↗AM625 official product referenceProduct details and featuresWeb ↗
More Texas Instruments development resources
TI hardware design resources ↗
Find EVMs, reference designs and design files.
CCStudio downloads and documentation ↗
Check toolchain and target support.
TI product categories ↗
Use official selectors for device-level specifications.
These broader manufacturer resources do not establish support or compatibility for every device on this page.
PRACTICAL QUESTIONS
Microprocessors and DSPs selection questions
How do I select a model within Microprocessors and DSPs?
Start with the documented product scope: Embedded processing for applications needing richer software or signal processing. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.
Is a base-device name enough to place an order?
A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.
Can the listed devices use the same PCB or development tools?
A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.
What should I include for sourcing or PCBA review?
Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.
PREPARE A USEFUL INQUIRY
Build your selection brief.
Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.
Open quotation form →Sources & portfolio context
Texas Instruments Microprocessors and DSPs reference ↗
Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.
← Complete Texas Instruments product map