BASE DEVICE
STM32G071RB
STM32G0 mainstream microcontroller.
- CPU
- Arm Cortex-M0+
- Maximum CPU clock
- 64 MHz
- Flash
- 128 kB
STMicroelectronics / Chips & IP
General-purpose STM32 MCUs
STM32 devices cover a range of embedded control requirements.
Product lines are representative. Stock, lifecycle, package and grade must be checked against the exact MPN.
Product scopeChips & IP
Device references in this category1
Documented ordering codes9
Information checked2026-09-28
FROM FAMILY TO DEVICE
Chip models in General-purpose STM32 MCUs
Documented device references
Base-device names are distinct from full ordering numbers. Each detail page identifies the product type, parameter scope and official source.
1 device reference
No model matches this search. Clear the filter or send the exact part number for review.
Browse the full STMicroelectronics product map →
WITHIN THIS PRODUCT LINE
Series & subcategories
STM32C5
STM32C5 is a mainstream STM32 microcontroller series listed in ST’s MCU portfolio.
0 device refs · 0 ordering codesExplore STM32C5 →STM32C0
STM32C0 is a mainstream STM32 microcontroller series listed in ST’s MCU portfolio.
0 device refs · 0 ordering codesExplore STM32C0 →STM32G0
STM32G0 is a mainstream STM32 microcontroller series listed in ST’s MCU portfolio.
0 device refs · 0 ordering codesExplore STM32G0 →STM32G4
STM32G4 is a mainstream STM32 microcontroller series listed in ST’s MCU portfolio.
0 device refs · 0 ordering codesExplore STM32G4 →STM32F0
STM32F0 is a mainstream STM32 microcontroller series listed in ST’s MCU portfolio.
0 device refs · 0 ordering codesExplore STM32F0 →STM32F1
STM32F1 is a mainstream STM32 microcontroller series listed in ST’s MCU portfolio.
0 device refs · 0 ordering codesExplore STM32F1 →STM32F3
STM32F3 is a mainstream STM32 microcontroller series listed in ST’s MCU portfolio.
0 device refs · 0 ordering codesExplore STM32F3 →SELECTION CONTEXT
Working with General-purpose STM32 MCUs
Define the required function
STM32 devices cover a range of embedded control requirements.
Use the requirements below to decide which specification limits your design. A family name alone is not a purchasing specification.
Check the integration boundary
Choose the complete device and ordering code before checking package pinout, power, electrical limits and operating grade. Keep family maxima separate from a selected device or package.
Open the manufacturer reference ↗ENGINEERING DECISIONS
What to confirm before selection
Use these checks to define the requirement. Family names alone do not establish performance, package compatibility or current availability.
- Check pin multiplexing and required timer channels.
- Budget flash, RAM and interrupt response.
Move from family to full ordering number
Identify the complete manufacturer part number, package, operating grade and electrical requirements. Reviewed FPGA specifications can then be compared at device level.
Send the exact project requirement →Preparing a complete board?
Bring the BOM, schematic constraints, stack-up and assembly requirements into the project brief.
PCBA project preparation →EVIDENCE & DEVELOPMENT
Documents for this product line
Start with the device table, then check electrical limits, ordering information and the applicable tool release.
General-purpose STM32 MCUs — manufacturer referenceManufacturer product documentationPrimary source ↗STM32G071RB official product referenceProduct overview / Description / All featuresWeb ↗
More STMicroelectronics development resources
STM32 Nucleo catalogue ↗
Select a board against its MCU and expansion connections.
STM32CubeIDE ↗
Find development software and supporting documentation.
STM32CubeMX ↗
Check configuration and code-generation support.
These broader manufacturer resources do not establish support or compatibility for every device on this page.
PRACTICAL QUESTIONS
General-purpose STM32 MCUs selection questions
How do I select a model within General-purpose STM32 MCUs?
Start with the documented product scope: STM32 devices cover a range of embedded control requirements. Then compare the device-specific facts below with your required resources and interfaces. Open each model for its evidence and ordering constraints.
Is a base-device name enough to place an order?
A base-device identifier identifies the silicon or model, but may omit package, speed, temperature, qualification and packing options. Use the manufacturer ordering table to establish the complete code. Reference examples do not establish stock or an approved replacement.
Can the listed devices use the same PCB or development tools?
A shared family or manufacturer does not establish pin compatibility. Compare pinout, supply and I/O-bank voltages, configuration, timing, tool support and thermal limits before changing a board.
What should I include for sourcing or PCBA review?
Provide the exact part or board revision, quantity, delivery requirement, operating environment and traceability needs. For assembly, identify BOM readiness, PCB stack-up, programming access and the inspection or functional-test scope.
PREPARE A USEFUL INQUIRY
Build your selection brief.
Select the points you want our team to review. Your selections stay in this browser until you choose to submit the quotation form.
Open quotation form →Sources & portfolio context
STMicroelectronics General-purpose STM32 MCUs reference ↗
Source review: 2026-09-28. This family guide does not assert stock or compatibility between devices.
← Complete STMicroelectronics product map