Blog

The TSOP-56 package is the largest member of the TSOP Type I family: 56 gull-wing leads on 0.50 mm pitch, 28 per short edge, a 14

A TSOP-54 package is a Type II thin small outline package with 27 gull-wing leads on each long edge at 0.80 mm pitch. Two of them

The TSOP-48 package is a Type I outline: 48 gull-wing leads on 0.50 mm pitch, 24 per short edge, a 12 mm body width, an 18.4

Leads on the two longer edges is what makes a package TSOP Type II. That choice lets a narrow body carry a lot of pins,

TSOP Type I puts its gull-wing leads on the two shorter edges of a rectangular thin package. JEDEC registers the outline as MO-142 at 24, 32,

The common TSOP-32 package is a Type I outline: 32 gull-wing leads on 0.50 mm pitch, 16 per short edge, an 8 mm body width and

A TSOP package is a thin, rectangular gull-wing surface-mount package registered by JEDEC at 1.20 mm maximum seated height. It comes in two lead arrangements

The mainstream SSOP-8 package is JEDEC MO-187 variation DA: eight gull-wing leads on 0.65 mm pitch, a 2.80 mm body width, a 4.00 mm lead

An SSOP-56 package is a 56-lead plastic gull-wing package on 0.635 mm pitch, with a 7.5 mm body, a 10.03 mm to 10.67 mm lead

The SSOP-28 package is a 28-lead shrink small outline package built for dense surface-mount boards. In its most common form it follows JEDEC MO-150: a