Blog

An SMD case code is a length-and-width shorthand: imperial 0603 means 0.060 in × 0.030 in, or 1.6 mm × 0.8 mm (metric 1608). This SMD

Three quad flat packages show up on most microcontroller and FPGA schematics: LQFP, TQFP, and PQFP. They look alike — gull-wing leads on all four

Semiconductor packaging is the back-end process that turns a bare silicon die into a usable component. It protects the die, routes its I/O to the

Resistor package sizes split into three families: rectangular chip (SMD) resistors, cylindrical MELF resistors, and heatsink-mounted power resistors. Chip sizes run from 01005 to 2512 and handle roughly

If a datasheet says LFCSP, MLF, MLP, HVQFN, or SON, you are looking at a QFN-family part under a vendor’s private name. The QFN package

Power semiconductor packages fall into three families: through-hole parts like the TO-220 and TO-247, leaded surface-mount parts like the DPAK and D2PAK, and leadless or

A plastic IC package is a silicon die and a metal leadframe encased in filled epoxy — cheap, light, and made by the billion, but

Picking a package is not a cosmetic choice made after the schematic is done. It fixes your thermal ceiling, your minimum PCB class, whether you

A datasheet Thermal Information table hands you six numbers in degrees C per watt — RθJA, RθJC(top), RθJC(bottom), RθJB, ψJT, and ψJB — and each

Pitch is the master variable in package selection: it sets how many pins fit, whether you can hand-solder the part, and whether the board needs